Date: Tue, 27 Feb 2001 10:14:37 +1100 From: Murray Taylor <mtaylor@bytecraft.com.au> To: "'freebsd-net@freebsd.org'" <freebsd-net@freebsd.org>, "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: Frame Relay in Australia with Telstra Message-ID: <710709BB8B02D311942E006067441810544267@MELEXC01>
next in thread | raw e-mail | index | archive | help
I am establishing FreeBSD 4.2 Release (from the CD Roms) on a Compaq A550
and
I need to setup a connection to a Telstra frame relay interface (which has
yet to be installed)
(A) Has anyone in .AU done this?
(B) What interface card did you use? and which driver ( sr, ar, cx, ?? )
(C) Which distributor did you get the card from?
(D) what software i/face are you using, do you recommend (sppp / netgraph /
?? )
(I have read the frame_relay item in the netgraph examples, but
otherwise have no
direct experience with netgraph)
I have recompiled the kernel to add IPFW, NETGRAPH and drop some uneeded net
devices and am
quite OK do do so as needed again. (FreeBSD on my home machine since 2.2.2)
Note the hostname in the dmesg is a dummy used for internal testing prior to
domain registration
Murray Taylor
Project Engineer
Bytecraft P/L +61 3 9587 2555
+61 3 9580 7690 fax
mtaylor@bytecraft.com.au
Current dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Feb 19 10:01:04 EST 2001
root@spyder.bytecraft.com.xxx:/usr/src/sys/compile/SPYDER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 863933901 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
avail memory = 519200768 (507032K bytes)
Preloaded elf kernel "kernel" at 0xc0350000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035009c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1a23)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Quadro graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem
0xefe00000-0xefefffff,0xefd00000-0xefd00fff irq 11 at device 2.0 on pci2
fxp0: Ethernet address 00:50:8b:f1:de:df
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem
0xeff00000-0xeff00fff irq 11 at device 7.0 on pci2
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
pci2: <unknown card> (vendor=0x1274, dev=0x5880) at 11.0 irq 11
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x6460-0x646f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 11 at
device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 11
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port
0x6400-0x643f,0x6000-0x60ff irq 11 at device 31.5 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to accept, logging limited to 100 packets/entry by default
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
acd0: CDROM <Compaq CRD-8402B> at ata1-master using PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQPC ATLAS10K2-TY184L DDC2> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?710709BB8B02D311942E006067441810544267>