From owner-freebsd-stable  Wed Aug 29  1:15:22 2001
Delivered-To: freebsd-stable@freebsd.org
Received: from bastix.tunix.nl (bastix.tunix.nl [193.79.201.39])
	by hub.freebsd.org (Postfix) with ESMTP
	id A1D8437B406; Wed, 29 Aug 2001 01:14:29 -0700 (PDT)
	(envelope-from jos@tunix.nl)
Received: (from fwmaster@localhost) by bastix.tunix.nl (8.9.1a/8.6.12) id KAA02710; Wed, 29 Aug 2001 10:14:27 +0200 (MET DST)
Received: by bastix.tunix.nl via smap (V1.3)
	id sma002477; Wed, 29 Aug 01 10:13:08 +0200
Received: (from jos@localhost)
	by epsilix.tunix.nl (8.9.3/8.9.3) id KAA45144;
	Wed, 29 Aug 2001 10:13:08 +0200 (MEST)
	(envelope-from jos)
Date: Wed, 29 Aug 2001 10:13:08 +0200
From: Jos Vissers <jos@tunix.nl>
To: freebsd-smp@freebsd.org, freebsd-stable@freebsd.org
Subject: Freezes in 4.4 RC on SMP kernel
Message-ID: <20010829101307.A44575@tunix.nl>
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="ZGiS0Q5IWpPtfppv"
Content-Disposition: inline
User-Agent: Mutt/1.2.4i
Sender: owner-freebsd-stable@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-stable.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-stable>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-stable>
X-Loop: FreeBSD.ORG


--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

I have been getting unexplicable freezes on my SMP server machine.
It is an Abit VP6 with 1G Micron memory and 2 Intel P3/800 cpus.

It runs fine with a RELENG_4_3 kernel.
It runs fine with a non smp 4.4 RC kernel.

It freezes after some time with a 4.4 RC smp kernel but apparently only
when I start up an X server on my workstation (other machine) and some
x-clients on the smp machine.
The workstation is running 4.4 RC (non smp).
My homedir is on the smp machine, mounted over NFS on the workstation and I
am using NIS and I'm running i4b.

Attached is various dmesg output and the kernel config.

Jos


--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg for 4.4 RC smp kernel
Content-Disposition: attachment; filename="dmesg.boot-4.4-RC-smp"

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #0: Tue Aug 28 00:03:29 CEST 2001
    root@islay.hoogehof.nl:/a/vol/obj/a/vol/src/FreeBSD-4-STABLE/src/sys/islay
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (798.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073676288 (1048512K bytes)
avail memory = 1040818176 (1016424K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel-4.4.smp" at 0xc04a7000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdc60
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x9000-0x900f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f irq 5 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 5 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9c00-0x9cff mem 0xd6100000-0xd6100fff irq 11 at device 9.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa000-0xa01f mem 0xd6000000-0xd60fffff,0xd6101000-0xd6101fff irq 12 at device 10.0 on pci0
fxp0: Ethernet address 00:a0:c9:a5:38:7d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xa400-0xa43f irq 12 at device 11.0 on pci0
pci0: <ATI Mach64-GV graphics accelerator> at 12.0 irq 5
ifpi0: <AVM Fritz!Card PCI> port 0xac00-0xac1f mem 0xd6103000-0xd610301f irq 10 at device 13.0 on pci0
ifpi0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
ifpi0: passive stack unit 0
atapci1: <HighPoint HPT370 ATA100 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 10 at device 14.0 on pci0
ata2: at 0xb000 on atapci1
ata3: at 0xb800 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 2100 Series> PJL,MLC,PCL,PCLXL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
unknown: <PNP0303> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
DUMMYNET initialized (010124)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging
IPv6 packet filtering initialized, default to accept, unlimited logging
i4bisppp: 32 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = enabled
SMP: AP CPU #1 Launched!
ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master tagged UDMA100
ad5: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-slave tagged UDMA100
ad6: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata3-master tagged UDMA66
ad7: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata3-slave tagged UDMA66
Waiting 3 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP HP35470A 1009> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Mounting root from ufs:/dev/ad4s1a
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-5301TA 1895> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)

--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg for 4.4 RC non smp kernel
Content-Disposition: attachment; filename="dmesg.boot-4.4-RC-nosmp"

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #0: Tue Aug 28 00:22:37 CEST 2001
    root@islay.hoogehof.nl:/a/vol/obj/a/vol/src/FreeBSD-4-STABLE/src/sys/islay-nosmp
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (798.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073676288 (1048512K bytes)
avail memory = 1040900096 (1016504K bytes)
Preloaded elf kernel "kernel-4.4.nosmp" at 0xc0496000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdc60
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x9000-0x900f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f irq 5 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 5 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9c00-0x9cff mem 0xd6100000-0xd6100fff irq 11 at device 9.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa000-0xa01f mem 0xd6000000-0xd60fffff,0xd6101000-0xd6101fff irq 12 at device 10.0 on pci0
fxp0: Ethernet address 00:a0:c9:a5:38:7d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xa400-0xa43f irq 12 at device 11.0 on pci0
pci0: <ATI Mach64-GV graphics accelerator> at 12.0 irq 5
ifpi0: <AVM Fritz!Card PCI> port 0xac00-0xac1f mem 0xd6103000-0xd610301f irq 10 at device 13.0 on pci0
ifpi0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
ifpi0: passive stack unit 0
atapci1: <HighPoint HPT370 ATA100 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 10 at device 14.0 on pci0
ata2: at 0xb000 on atapci1
ata3: at 0xb800 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 2100 Series> PJL,MLC,PCL,PCLXL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
DUMMYNET initialized (010124)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging
IPv6 packet filtering initialized, default to accept, unlimited logging
i4bisppp: 32 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = enabled
ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master tagged UDMA100
ad5: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-slave tagged UDMA100
ad6: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata3-master tagged UDMA66
ad7: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata3-slave tagged UDMA66
Waiting 3 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP HP35470A 1009> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Mounting root from ufs:/dev/ad4s1a
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-5301TA 1895> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)

--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg for 4.3 Release kernel
Content-Disposition: attachment; filename="dmesg.boot-4.3"

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE-p12 #0: Sat Aug 18 11:31:50 CEST 2001
    root@islay.hoogehof.nl:/a/vol/src/FreeBSD-4.3/src/sys/compile/islay
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (798.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073676288 (1048512K bytes)
avail memory = 1040896000 (1016500K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel-4.3" at 0xc0493000.
Pentium Pro MTRR support enabled
ERROR: "i4bctl" bmaj but is not a disk
ERROR: "i4btel" bmaj but is not a disk
ERROR: "i4brbch" bmaj but is not a disk
ERROR: "i4btrc" bmaj but is not a disk
ERROR: "i4b" bmaj but is not a disk
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x9000-0x900f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f irq 5 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 5 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9c00-0x9cff mem 0xd6100000-0xd6100fff irq 11 at device 9.0 on pci0
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa000-0xa01f mem 0xd6000000-0xd60fffff,0xd6101000-0xd6101fff irq 12 at device 10.0 on pci0
fxp0: Ethernet address 00:a0:c9:a5:38:7d
pcm0: <AudioPCI ES1371> port 0xa400-0xa43f irq 12 at device 11.0 on pci0
pci0: <ATI Mach64-GV graphics accelerator> at 12.0 irq 5
ifpi0: <AVM Fritz!Card PCI> port 0xac00-0xac1f mem 0xd6103000-0xd610301f irq 10 at device 13.0 on pci0
ifpi0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
ifpi0: passive stack unit 0
atapci1: <HighPoint HPT370 ATA100 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 10 at device 14.0 on pci0
ata2: at 0xb000 on atapci1
ata3: at 0xb800 on atapci1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 2100 Series> PJL,MLC,PCL,PCLXL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
unknown: <PNP0303> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
IPv6 packet filtering initialized, default to accept, unlimited logging
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 32 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
DUMMYNET initialized (010124)
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging
i4bctl: ISDN system control port attached
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.16 initialized.  Default = pass all, Logging = enabled
SMP: AP CPU #1 Launched!
ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master tagged UDMA100
ad5: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-slave tagged UDMA100
ad6: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata3-master tagged UDMA66
ad7: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata3-slave tagged UDMA66
Waiting 3 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP HP35470A 1009> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Mounting root from ufs:/dev/ad4s1a
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-5301TA 1895> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)

--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Description: kernel config
Content-Disposition: attachment; filename=islay

machine		i386
cpu		I686_CPU
ident		islay
maxusers	128

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	IPSEC			#IP security
options 	IPSEC_ESP		#IP security (crypto; define w/ IPSEC)
#options 	IPSEC_DEBUG		#debug for IP security
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
#options 	MFS			#Memory Filesystem
#options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
#options 	NFS_ROOT		#NFS usable as root device, NFS required
#options 	MSDOSFS			#MSDOS Filesystem
#options 	CD9660			#ISO 9660 Filesystem
#options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=3000		#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	USER_LDT		#allow user-level control of i386 ldt
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extentions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	IPFIREWALL		#firewall
options 	IPFIREWALL_VERBOSE	#print information about
options 	IPFIREWALL_FORWARD	#enable transparent proxy support
options 	IPFIREWALL_DEFAULT_TO_ACCEPT	#allow everything by default
options 	IPDIVERT		#divert sockets
options		DUMMYNET		# the "dummynet" bandwidth limiter
options 	IPV6FIREWALL		#firewall for IPv6
options 	IPV6FIREWALL_VERBOSE	#print information about
options 	IPV6FIREWALL_DEFAULT_TO_ACCEPT
options 	IPFILTER		#ipfilter support
options 	IPFILTER_LOG		#ipfilter logging
#options	IPFILTER_DEFAULT_BLOCK	#block all packets by default
options 	TCP_DROP_SYNFIN		#drop TCP packets with SYN+FIN
options		ICMP_BANDLIM		#Rate limit bad replies
#options 	NETGRAPH		#netgraph(4) system
options 	SOFTUPDATES
options 	PNPBIOS
options		NMBCLUSTERS=4096
options		MAXDSIZ="(256*1024*1024)"
options		DFLDSIZ="(256*1024*1024)"
#options	I4B_SMP_WORKAROUND	# only required for isic? (Teles 16.3)

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
#device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		amd		# AMD 53C974 (Teckram DC-390(T))
#device		dpt		# DPT Smartcache - See LINT for options!
#device		isp		# Qlogic family
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets)

#device		adv0	at isa?
#device		adw
#device		bt0	at isa?
#device		aha0	at isa?
#device		aic0	at isa?

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers
#device		ida		# Compaq Smart RAID
#device		amr		# AMI MegaRAID
#device		mlx		# Mylex DAC960 family

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? flags 0x20 # Advanced Power Management

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da
#device		pps		# Pulse per second Timing Interface
device		lpbb		# Philips official parallel port I2C
				#   bit-banging interface

#options	PCFCLOCK_VERBOSE	# Verbose pcfclock driver
#options	PCFCLOCK_MAX_RETRIES=5	# Maximum read tries (default 10)
device		pcfclock

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		tx		# SMC 9432TX (83c170 ``EPIC'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
device		ed0
#device		ex
#device		ep
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		fe0	at isa? port 0x300
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300
#device		sn0	at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
options		PPP_BSDCOMP	#PPP BSD-compress support
options		PPP_DEFLATE	#PPP zlib/deflate/gzip support
options		PPP_FILTER	#enable bpf filtering (needs bpf)
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

pseudo-device	vn		#Vnode driver (turns a file into a device)
pseudo-device	snp	3	#Snoop device - to look at pty/vty/etc..

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet
#
# debugging options for the USB subsystem
#options		UHCI_DEBUG
#options		OHCI_DEBUG
#options		USB_DEBUG
#options		UGEN_DEBUG
#options		UHID_DEBUG
#options		UHUB_DEBUG
#options		UKBD_DEBUG
#options		ULPT_DEBUG
#options		UMASS_DEBUG
#options		UMS_DEBUG

# Sound:
device		pcm

# System Management Bus:
device		smbus		# Bus support, required for smb
device		iicbus		# Bus support, required for ic/iic/iicsmb
device		iicbb		# generic I2C bit-banging code
device		alpm		# Acer Aladdin-IV/V/Pro2 Power Management Unit
device		intpm		# Intel PIIX4 Power Management Unit
device		bktr		# brooktree848 I2C software interface

# ISDN4BSD section
#
#	last edit-date: [Sun Jul 22 17:35:36 2001]
#
#---------------------------------------------------------------------------

# Siemens/Infineon chipsets
#device		isic0

# Winbond chipset
#device		iwic0

# AVM Fritz PCI
device		ifpi0

# Teles 16.3c
#device		ihfc0

# NETjet-S / Teles PCI-TJ
#device          itjc0

# AVM Fritz PnP
#device          ifpnp0

# AVM B1/T1
#device		"i4bcapi"
#device		iavc0

# enable some ISA cards within the "isic" driver
#options		TEL_S0_8
#options		TEL_S0_16
#options		TEL_S0_16_3
#options		AVM_A1
#options		USR_STI
#options		ELSA_PCC16

# enable some ISA PnP cards within the "isic" driver
#options		TEL_S0_16_3_P
#options		CRTX_S0_P
#options		DRN_NGO
#options		SEDLBAUER
#options		ELSA_QS1ISA
#options		SIEMENS_ISURF2
#options		ASUSCOM_IPAC
#options		EICON_DIVA

# enable ELSA Microlink PCI card within the "isic" driver
#options		ELSA_QS1PCI

# protocol stack
pseudo-device	"i4bq921"
pseudo-device	"i4bq931"
pseudo-device	"i4b"

# control devices
pseudo-device	"i4btrc"	4
pseudo-device	"i4bctl"
pseudo-device	"i4brbch"	4
pseudo-device	"i4btel"	2

# IP over raw HDLC
options		IPR_VJ
pseudo-device	"i4bipr"	4

# kernel sppp/isppp
pseudo-device	"i4bisppp"	32

# Netgraph interface (does not compile on 4.x !)
#options         NETGRAPH
#pseudo-device	"i4bing"	4


--ZGiS0Q5IWpPtfppv--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message