From owner-freebsd-stable Mon Apr 5 18: 8: 1 1999 Delivered-To: freebsd-stable@freebsd.org Received: from squirrel.tgsoft.com (cx20270-a.pwy1.sdca.home.com [24.0.169.3]) by hub.freebsd.org (Postfix) with SMTP id 0176C14EF6 for ; Mon, 5 Apr 1999 18:07:58 -0700 (PDT) (envelope-from thompson@squirrel.tgsoft.com) Received: (qmail 543 invoked by uid 128); 6 Apr 1999 01:06:00 -0000 Date: 6 Apr 1999 01:06:00 -0000 Message-ID: <19990406010600.542.qmail@squirrel.tgsoft.com> From: mark thompson To: freebsd-stable@freebsd.org Subject: fsck not making disks mountable (ME TOO!) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I was reading (here?) that somebody had had a problem with the system refusing to mount a disk on reboot... though it had fsck'ed cleanly, the system still said that it was dirty. Just happened to me. The disks in question were mounted async. System crashed. On reboot fsck said they were clean, but the system didn't. Manually fsck'ing and rebooting fixed it. --- these are the two bad boys from fstab --- /dev/da1s3c /w ufs rw,async,nodev 28 0 /dev/da1s4c /v ufs rw,async,nodev 28 0 --- this is the dmesg --- Sorry I don't have a log of the failure --- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-STABLE #9: Mon Apr 5 17:27:25 PDT 1999 thompson@squirrel.tgsoft.com:/w/CVS/release/src/sys/compile/MARX Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K5(tm) Processor (100.23-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x511 Stepping=1 Features=0x21bf real memory = 50331648 (49152K bytes) config> pnp 1 0 enable os irq0 10 drq0 1 port0 0x220 port1 0x330 port2 0x388 Invalid command or syntax. Type `?' for help. avail memory = 46108672 (45028K bytes) Preloaded elf kernel "kernel" at 0xf02cd000. Preloaded userconfig_script "/kernel.config" at 0xf02cd09c. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.7.0 vga0: rev 0x0a on pci0.17.0 ahc0: rev 0x01 int a irq 11 on pci0.18.0 ahc0: Using left over BIOS settings ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs xl0: <3Com 3c900-TPO Etherlink XL> rev 0x00 int a irq 11 on pci0.19.0 xl0: Ethernet address: 00:60:97:7e:cd:d4 xl0: selecting 10baseT transceiver, half duplex de0: rev 0x22 int a irq 11 on pci0.20.0 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:40:05:42:16:dd Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <8 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16550A ppc0 at 0x3bc irq 7 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode nlpt0: on ppbus 0 nlpt0: Interrupt-driven port fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface IP packet filtering initialized, divert enabled, rule-based forwarding disabled, unlimited logging Waiting 15 seconds for SCSI devices to settle de0: enabling 10baseT port changing root device to da1s1a cd0 at ahc0 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.032MB/s transfers (4.032MHz, offset 15) cd0: cd present [333234 x 2048 byte records] da1 at ahc0 bus 0 target 3 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da1: 4100MB (8398600 512 byte sectors: 64H 32S/T 4100C) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 2040MB (4178874 512 byte sectors: 64H 32S/T 2040C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message