Date: Thu, 26 May 2011 17:32:18 +0800 From: Adrian Chadd <adrian@freebsd.org> To: freebsd-wireless@freebsd.org Subject: Initial AR9287 RX support in HEAD Message-ID: <BANLkTimhZnsdk=CGwsU3FGYVA43SK=gYwg@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi, After some quick consultation with Bernhard, I've committed the AR9287 work in progress to -HEAD. Why? Because I had a few people show interest in tinkering with porting support for this NIC, so I figured I'd make it a lot easier by committing what I've done to date. I decided it was worth throwing it into -HEAD minus the TX calibration / TX power setting code. It isn't linked into the build because running the NIC in anything other than monitor mode right now is very likely going to do bad things. On the up side, it's behaving itself in monitor mode. I plan on tidying up the closed-loop TX power control code that's currently shared between AR5416/AR9160, AR9280 and AR9285 before adding the needed TX power setting code to the AR9287. But if someone wants to just beat me to it for their own use by copy/pasting the AR9287 TX power calibration and setting routines from ath9k, be my guest. Just be careful that it's doing it correctly or you could damage your card. :) Enjoy, Adrian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTimhZnsdk=CGwsU3FGYVA43SK=gYwg>