Date: Wed, 12 Dec 2012 08:54:39 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: Mike Tancsa <mike@sentex.net> Cc: freebsd-usb@freebsd.org Subject: Re: USB3 SATA enclosure Message-ID: <201212120854.39948.hselasky@c2i.net> In-Reply-To: <50C755BD.7020306@sentex.net> References: <50C65439.8010408@sentex.net> <201212111249.25580.hselasky@c2i.net> <50C755BD.7020306@sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 11 December 2012 16:48:13 Mike Tancsa wrote: > On 12/11/2012 6:49 AM, Hans Petter Selasky wrote: > > On Tuesday 11 December 2012 12:34:11 Mike Tancsa wrote: > >> hw.usb.timings.extra_power_up_time: 20 > >> hw.usb.timings.resume_recovery: 50 > >> hw.usb.timings.resume_wait: 50 > >> hw.usb.timings.resume_delay: 250 > >> hw.usb.timings.set_address_settle: 10 > >> hw.usb.timings.port_resume_delay: 40 > >> hw.usb.timings.port_powerup_delay: 300 > >> hw.usb.timings.port_reset_recovery: 250 > >> hw.usb.timings.port_root_reset_delay: 250 > >> hw.usb.timings.port_reset_delay: 50 > > > > Try to tune these up, one by one. > > I doubled them all, and still only > > 0(cage)# usbconfig > ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE > ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER > (5.0Gbps) pwr=SAVE > ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE > ugen1.2: <product 0x17ab vendor 0x0b05> at usbus1, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > ugen1.3: <WinTV HVR-950 Hauppauge> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON > ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE > ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE > ugen0.3: <USB 3.0 SATA Bridge VIA Labs, Inc.> at usbus0, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > ugen0.4: <product 0x1400 vendor 0x04d9> at usbus0, cfg=0 md=HOST spd=LOW > (1.5Mbps) pwr=ON Have you tried a 10-current kernel after r243780? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201212120854.39948.hselasky>