From owner-freebsd-questions Tue Sep 28 5:20:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from logatome.micronet.fr (logatome-2.francenet.fr [193.149.96.2]) by hub.freebsd.org (Postfix) with ESMTP id 547B8151B9 for ; Tue, 28 Sep 1999 05:20:33 -0700 (PDT) (envelope-from e-masson@kisoft-services.com) Received: from kisoft-services.com (kisoft.dialup.francenet.fr [193.149.106.242]) by logatome.micronet.fr (8.8.8/8.8.8) with ESMTP id OAA00430 for ; Tue, 28 Sep 1999 14:17:18 +0200 (CEST) Message-ID: <37F0B29A.7A911B42@kisoft-services.com> Date: Tue, 28 Sep 1999 14:20:42 +0200 From: Eric MASSON Organization: Kisoft Services X-Mailer: Mozilla 4.6 [fr] (WinNT; I) X-Accept-Language: fr MIME-Version: 1.0 To: FreeBSD Questions Subject: Canon LBP-660 Printer Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, My boss ordered a Canon LBP-660 printer for our new office. This thing seems to be a Winprinter (That's what it claims on the box). Trying to print under dos gives a timeout error on lpt. So i thought it would be impossible to use it under BSD. I ran BSD with the printer attached and then on dmesg, saw the following : ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppb0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE Probing for PnP devices on ppbus0: ppbus0: PRINTER RASTER lpt0: on ppbus 0 lpt0: Interrupt-driven port Does this sequence mean it would be possible to use this printer with BSD or not. If yes any refs are welcome. Regards Eric Dmesg Output : Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #0: Mon Sep 27 14:41:05 GMT 1999 emss@notbsdems.nantes.kisoft-services.com:/usr/src/sys/compile/THINKPAD Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (266.62-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff real memory = 67108864 (65536K bytes) avail memory = 62844928 (61372K bytes) Preloaded elf kernel "kernel" at 0xc024d000. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x02 on pci0.2.0 ide_pci0: rev 0x01 on pci0.2.1 chip2: rev 0x02 on pci0.2.3 pcic0: rev 0x02 int a irq 11 on pci0.3.0 pcic1: rev 0x02 int a irq 11 on pci0.3.1 vga0: rev 0x12 int a irq 11 on pci0.5.0 Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 not found fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordis acd0: drive speed 4134KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppb0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE Probing for PnP devices on ppbus0: ppbus0: PRINTER RASTER lpt0: on ppbus 0 lpt0: Interrupt-driven port ep0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 ... try to identify the yamaha pcm0 at 0x530 irq 5 drq 0 flags 0xa211 on isa mss_attach 0 at 0x530 irq 5 dma 0:1 flags 0xa211 PC-Card VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 3 Initializing PC-card drivers: ed ep sio changing root device to wd0s2a Card inserted, slot 0 ep0: No connectors or MII. ep0: [*UTP*] address 00:00:86:33:ea:28 -- Any opinions expressed above | Murphy's Law Corollary : are my own, not Kisoft's | Murphy was an optimist. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message