From owner-freebsd-stable Thu Aug 29 12:58:30 1996 Return-Path: owner-stable Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id MAA00641 for stable-outgoing; Thu, 29 Aug 1996 12:58:30 -0700 (PDT) Received: from FileServ1.MI.Uni-Koeln.DE (FileServ1.MI.Uni-Koeln.DE [134.95.212.1]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id MAA00636 for ; Thu, 29 Aug 1996 12:58:28 -0700 (PDT) Received: from x14.mi.uni-koeln.de (annexr3-15.slip.Uni-Koeln.DE) by FileServ1.MI.Uni-Koeln.DE with SMTP id AA08317 (5.67b/IDA-1.5 for ); Thu, 29 Aug 1996 21:58:21 +0200 Received: (from se@localhost) by x14.mi.uni-koeln.de (8.7.5/8.6.9) id VAA22190; Thu, 29 Aug 1996 21:35:20 +0200 (MET DST) Date: Thu, 29 Aug 1996 21:35:20 +0200 (MET DST) Message-Id: <199608291935.VAA22190@x14.mi.uni-koeln.de> From: Stefan Esser To: Mark Li Cc: freebsd-stable Subject: Re: Install problem with Dual F/W SCSI2 In-Reply-To: <9608291701.AA2242@mail.zd.com> References: <9608291701.AA2242@mail.zd.com> Sender: owner-stable@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Mark Li writes: > I have an IBM 704 with: > > two Adaptec 7880 boards, each with one drive > the IDs are: 7 for the boards and 8 for the drives. > on one board there is a SCSI CD on ID 6 > > I'm trying to install FreeBSD 2.1 stable, but the boot disk install does not > find any adaptors, and reports that it finds no discs. I've disabled the Wide > negotiation. Any suggestions would be helpful. The IBM 704 is a multi-processor capable P6, right ? I'm just preparing a set of patches for somebody to try, and the output from these patches ought to make it possible to fully support that system. You'll need a custom boot floppy and will have to apply a patch, but the next SNAP and release should work out of the box ... If anybody got the register map of the Orion chip set (especially the host to PCI bridge) and was willing to scan or FAX them to me, this would help a lot !!! Regards, STefan