Date: Tue, 10 Feb 2004 07:05:53 -0800 (PST) From: Naveen Kumar <g_naveen_k@yahoo.com> To: freebsd-mobile@freebsd.org Subject: problem configuring cardbus bridge on Sony VAIO FX 170 Message-ID: <20040210150553.23276.qmail@web13603.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi all
I am having a problem getting the Ricoh Cardbus
bridge RF5C476 to be configured correctly under BSD.
Is there anything that can be done (device hints) to
correct this problem ?
Thanks
Naveen
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 5.0-RELEASE #0: Sun Feb 8 17:31:56 EST 2004
root@:/usr/src/sys/i386/compile/VAIO
Preloaded elf kernel "/boot/kernel/kernel" at
0xc0645000.
Preloaded elf module "/boot/kernel/cbb.ko" at
0xc06450a8.
Preloaded elf module "/boot/kernel/exca.ko" at
0xc0645150.
Preloaded elf module "/boot/kernel/acpi.ko" at
0xc06451fc.
Calibrating clock(s) ... TSC clock: 794945197 Hz,
i8254 clock: 1193214 Hz
CLK_USE_I8254_CALIBRATION not specified - using
default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old
calibration method
Timecounter "TSC" frequency 794926833 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (794.93-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132644864 (126 MB)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x0066c000 - 0x07ceffff, 124272640 bytes (30340 pages)
0x07d00000 - 0x07e77fff, 1540096 bytes (376 pages)
avail memory = 122032128 (116 MB)
bios32: Found BIOS32 Service Directory header at
0xc00f7170
bios32: Entry = 0xfd878 (c00fd878) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd860+0x150
pnpbios: Found PnP BIOS data at 0xc00f71a0
pnpbios: Entry = f0000:8f27 Rev = 1.0
Other BIOS signatures found:
Initializing GEOMetry subsystem
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY U0 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to
GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16
to GPE31
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fac0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is
there (id=11308086)
Using $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 30 A 0x60 9
embedded 0 30 B 0x61 9
embedded 0 30 C 0x62 9
embedded 0 30 D 0x63 9
slot 1 1 6 A 0x62 9
slot 1 1 6 B 0x63 9
slot 1 1 6 C 0x60 9
slot 1 1 6 D 0x61 9
slot 2 1 4 A 0x61 9
slot 2 1 4 B 0x60 9
slot 2 1 4 C 0x62 9
slot 2 1 4 D 0x63 9
embedded 1 9 A 0x62 9
embedded 1 9 B 0x63 9
embedded 1 8 A 0x68 9
embedded 0 0 A 0x60 9
embedded 0 0 B 0x61 9
embedded 0 0 C 0x62 9
embedded 0 0 D 0x63 9
embedded 0 31 A 0x60 9
embedded 0 31 B 0x61 9
embedded 0 31 C 0x6b 9
embedded 0 31 D 0x63 9
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12
14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12
14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12
14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12
14 15
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks BAD min = 3, max = 6, width = 4
ACPI timer looks GOOD min = 3, max = 4, width = 2
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.1.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 0.1.3
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.31.1
\\_SB_.LNKH irq 9: [ 9] low,level,sharable 0.31.2
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 0.31.3
---- before setting priority for links ------------
\\_SB_.LNKC:
interrupts: 9
penalty: 830
references: 1
priority: 0
\\_SB_.LNKD:
interrupts: 9
penalty: 830
references: 2
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKD:
interrupts: 9
penalty: 830
references: 2
priority: 1660
\\_SB_.LNKC:
interrupts: 9
penalty: 830
references: 1
priority: 830
---- after fixup boot-disabled links --------------
\\_SB_.LNKD:
interrupts: 9
penalty: 830
references: 2
priority: 1660
\\_SB_.LNKC:
interrupts: 9
penalty: 830
references: 1
priority: 830
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.1.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 0.1.3
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.31.1
\\_SB_.LNKH irq 9: [ 9] low,level,sharable 0.31.2
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 0.31.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1130, revid=0x11
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
map[10]: type 3, range 32, base f8000000, size 26,
enabled
map[14]: type 1, range 32, base f4000000, size 19,
enabled
found-> vendor=0x8086, dev=0x1132, revid=0x11
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x03
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244c, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
map[20]: type 4, range 32, base 00001800, size 4,
enabled
found-> vendor=0x8086, dev=0x244a, revid=0x03
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
map[20]: type 4, range 32, base 00001820, size 5,
enabled
found-> vendor=0x8086, dev=0x2442, revid=0x03
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
intpin=d, irq=9
map[20]: type 4, range 32, base 00001810, size 4,
enabled
found-> vendor=0x8086, dev=0x2443, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
intpin=b, irq=9
map[20]: type 4, range 32, base 00002400, size 5,
enabled
found-> vendor=0x8086, dev=0x2444, revid=0x03
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
intpin=c, irq=9
map[10]: type 4, range 32, base 00001c00, size 8,
enabled
map[14]: type 4, range 32, base 00001840, size 6,
enabled
found-> vendor=0x8086, dev=0x2445, revid=0x03
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 00002000, size 8,
enabled
map[14]: type 4, range 32, base 00001880, size 7,
enabled
found-> vendor=0x8086, dev=0x2446, revid=0x03
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
intpin=b, irq=9
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem
0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at
device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xf4100000-0xf41fffff
pcib1: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 1.2.0
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 1.2.1
\\_SB_.LNKE irq 9: [ 9] low,level,sharable 1.8.0
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.12.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 1.12.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 1.12.2
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 1.12.3
---- before setting priority for links ------------
\\_SB_.LNKD:
interrupts: 9
penalty: 1670
references: 4
priority: 1660
\\_SB_.LNKC:
interrupts: 9
penalty: 1670
references: 3
priority: 830
---- before fixup boot-disabled links -------------
\\_SB_.LNKD:
interrupts: 9
penalty: 1670
references: 4
priority: 6680
\\_SB_.LNKC:
interrupts: 9
penalty: 1670
references: 3
priority: 5010
---- after fixup boot-disabled links --------------
\\_SB_.LNKD:
interrupts: 9
penalty: 1670
references: 4
priority: 6680
\\_SB_.LNKC:
interrupts: 9
penalty: 1670
references: 3
priority: 5010
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 1.2.0
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 1.2.1
\\_SB_.LNKE irq 9: [ 9] low,level,sharable 1.8.0
\\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.12.0
\\_SB_.LNKB irq 9: [ 9] low,level,sharable 1.12.1
\\_SB_.LNKC irq 0: [ 9] low,level,sharable 1.12.2
\\_SB_.LNKD irq 0: [ 9] low,level,sharable 1.12.3
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f4101000, size 11,
memory disabled
map[14]: type 1, range 32, base f4104000, size 14,
enabled
found-> vendor=0x104c, dev=0x8021, revid=0x02
bus=1, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0110, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns),
maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D2 D3 current D0
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=1, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x07
(1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=1, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x07
(1750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4100000, size 12,
enabled
map[14]: type 4, range 32, base 00003000, size 6,
enabled
found-> vendor=0x8086, dev=0x2449, revid=0x03
bus=1, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns),
maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <serial bus, FireWire> at device 0.0 (no driver
attached)
cbb0: <RF5C476 PCI-CardBus Bridge> at device 2.0 on
pci1
cbb0: sockbase : 00000000
cbb0: sockbase after read:fffff000
cbb0: sckbase calc:00001000
pcib1: device cbb0 requested decoded memory range
0xf4100000-0xf41fffff
cbb0: base_res : 0xc18c1e40 start : f4100000
cbb0: PCI Memory allocated: f4100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 1.2.INTA (source \\_SB_.LNKC)
pcib1: possible interrupts: 9
pcib1: slot 2 INTA routed to irq 9 via \\_SB_.LNKC
cbb0: cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
cbb1: <RF5C476 PCI-CardBus Bridge> at device 2.1 on
pci1
cbb1: sockbase : 00040110
cbb1: sockbase after read:00040110
cbb1: sckbase calc:00000010
pcib1: device cbb1 requested decoded memory range
0xf4100000-0xf41fffff
cbb1: base_res : 0xc18c1c00 start : f4101000
cbb1: PCI Memory allocated: f4101000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib1: matched entry for 1.2.INTB (source \\_SB_.LNKD)
pcib1: possible interrupts: 9
pcib1: slot 2 INTB routed to irq 9 via \\_SB_.LNKD
cbb1: cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem
0xf4100000-0xf4100fff irq 9 at device 8.0 on pci1
pcib1: device fxp0 requested decoded memory range
0xf4100000-0xf4100fff
pcib1: device fxp0 requested decoded I/O range
0x3000-0x303f
fxp0: using I/O space register mapping
fxp0: Ethernet address 08:00:46:13:e2:54
fxp0: PCI IDs: 8086 2449 8086 3013 0003
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port
0x1800-0x180f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=01
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A>
port 0x1820-0x183f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A>
on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev
1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, bus powered
pci0: <serial bus, SMBus> at device 31.3 (no driver
attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B>
port 0x2400-0x241f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B>
on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 31.5 (no driver
attached)
pci0: <simple comms> at device 31.6 (no driver
attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60
irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1,
flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <embedded controller> port 0x66,0x62 on
acpi0
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fdc0: <Enhanced floppy controller (i82077, NE72065 or
clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcbfff on
isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000
irq 10 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on
isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons
terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x401 0x401 0x401 0x401
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0
size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads,
1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to
12.5%
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1
times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
cbb0: card inserted: event=0xf4100000, state=f4100008
cbb0: Unsupported card type detected
cbb1: card inserted: event=0x01010000, state=00000000
cbb1: Unsupported card type detected
ata1-slave: ATAPI identify retries exceeded
ad0: success setting UDMA5 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IC25N020ATCS05-0/CS2OA61A> ATA-5 disk at
ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S,
512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <UJDA710/1.04> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1377KB/s
(1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM,
DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 8389753344
end 8389785599
GEOM: Configure ad0s2, start 8389785600 length
2147346432 end 10537132031
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 123731968 end
123731967
GEOM: Configure ad0s2b, start 123731968 length
268435456 end 392167423
GEOM: Configure ad0s2c, start 0 length 2147346432 end
2147346431
GEOM: Configure ad0s2d, start 392167424 length
104857600 end 497025023
GEOM: Configure ad0s2e, start 497025024 length
1650321408 end 2147346431
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
acpi_cmbat1: battery initialization failed, giving up
__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040210150553.23276.qmail>