Date: Tue, 14 Oct 2008 08:27:17 -0400 From: benjamin thielsen <bthielsen@safarivideonetworks.com> To: freebsd-questions@freebsd.org Subject: Re: How to get my Dad's Win2k system to access internet through my FreeBSD 6.2 system Message-ID: <BC52D116-29A2-4411-9A50-5B723B3BBFF3@safarivideonetworks.com> In-Reply-To: <46D5F699-0EB9-469F-9633-CD7FF7D3F9B8@safarivideonetworks.com> References: <48F43EB1.40304@gmail.com> <46D5F699-0EB9-469F-9633-CD7FF7D3F9B8@safarivideonetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
ack! sorry for the blank reply barrage - my apologies! i was inadvertently holding down a key combination that caused my mail client to send off a flurry of blank responses before i realized it was occurring. probably a sign to stay away from computers today :) -b On Oct 14, 2008, at 08.10, benjamin thielsen wrote: > Manish Jain wrote: > >> >> Hi, >> >> I am poor at networking and need a little bit of help. My dad has a >> Windows 2000 machine with a network card but does not have a >> connection >> to the internet. My freebsd 6.2 box is connected to the internet >> and has >> 2 network cards, rl0 and rl1. rl0 connects to the ISP and rl1 is >> directly connected via a long Ethernet cable to the NIC on my dad's >> machine. While I can access the internet easily, I want my dad to be >> able to connect to the internet with my freebsd box serving as the >> gateway. Can anyone please explain to me in easy steps how to >> accomplish >> this ? >> > > Although to many old-timers this is easily achieved, to someone new to > networking it is difficult to explain it in "easy steps". It > involves a set > of pieces that have to fit together correctly in order to work. You > will > need to do some proper reading on the underlying concepts first. > > First, establish that there exists basic network connectivity > between your > machine and your dads. You may need to use a crossover cable. You > will want > to assign a static IP address in the "Private" IP space range to > your rl1 > interface. This is also known as RFC 1918. You will also want to > manually > configure a static IP on your dad's machine that is in the same > network, > instead of allowing it to come up on the link.local of 169.254.x.x. An > example would be your rl1 == 192.168.10.1 netmask 255.255.255.0 and > your > dad's machine == 192.168.10.2 netmask 255.255.255.0. For DNS at this > stage > you can use hosts files on each host for name resolution. Ensure > that each > machine can be ping'd by the other. > > Next, you will want to configure your FreeBSD machine as a NAT > gateway. In > your /etc/rc.conf you will want something like gateway_enable="YES" > and > some form of firewall initialization[1]. The gateway_enable is what > allows > the forwarding of packets between your rl0 and your rl1, but the > activation > of NAT functionality is usually a function contained within a > firewall. So > conceptually, the firewall will be "in between" rl0 and rl1. > > There are three different firewalls you can choose from. Configuring > the > firewall is usually where the inexperienced get stuck. This subject > material is beyond the scope of this missive, and you would do well to > start reading in the Handbook. But essentially, when you configure > NAT in > the firewall your rl0 (connected to the ISP) will be assigned a > "Public" IP > address and the NAT function will translate between "Public" and > "Private". > > The next sticky point that will happen, should you get this far, is > name > resolution. You will want to place the IP addresses of the name > servers of > your ISP in your /etc/resolv.conf. You will also want to enter these > into > the TCP configuration of your dad's machine. In addition, on your > dad's > machine you will enter the IP address you used on your rl1 as the > "default > route". > > The subject is much too broad for exhaustive coverage here. If your > DSL/Cable modem has router ports on it, it might just be easier to > plug > your dad's machine up there and forget about all of this. Much > reading will > be required of you, and once you know most of it then you will know > what > specific questions to ask when you encounter sticking points. This is > intended only as a very generic form of overview. > > -Mike > > [1] For example, a couple of lines from my /etc/rc.conf: > > pf_enable="YES" > pf_rules="/etc/pf.conf" > pf_flags="-e" > pflog_enable="YES" > pflog_logfile="/var/log/pflog" > pflog_flags="" > > and the NAT line from my /etc/pf.conf: > > nat on $ExtIF inet from $INTERNAL to any -> ($ExtIF) > > Please note that these are for illustrative purposes only, and by > themselves > will do nothing for your specific situation. There is much more that > you > will have to dig out of the documentation, understand, and configure > appropriately. > > > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org > " > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org > "
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BC52D116-29A2-4411-9A50-5B723B3BBFF3>