From owner-freebsd-mobile  Wed Jul 14  7:29:17 1999
Delivered-To: freebsd-mobile@freebsd.org
Received: from lily.ezo.net (lily.ezo.net [206.102.130.13])
	by hub.freebsd.org (Postfix) with ESMTP id 78A2814CC9
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 14 Jul 1999 07:29:14 -0700 (PDT)
	(envelope-from jflowers@ezo.net)
Received: from lily.ezo.net (jflowers@localhost.ezo.net [127.0.0.1])
	by lily.ezo.net (8.8.7/8.8.7) with SMTP id KAA07110;
	Wed, 14 Jul 1999 10:29:00 -0400 (EDT)
Date: Wed, 14 Jul 1999 10:29:00 -0400 (EDT)
From: Jim Flowers <jflowers@ezo.net>
To: FreeBSD MAIL <freebsd@mauibuilt.com>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: WaveLAN broken
In-Reply-To: <199907140848.WAA11429@mauibuilt.com>
Message-ID: <Pine.BSI.3.91.990714100825.6395A-100000@lily.ezo.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Don't know whether it will make you feel better or not but it 
definitely sounds like a timing problem.  I had to solve this for 
something around 2.2.7 by hacking the if_wl.c driver.  I believe I reported this in a post 
to freebsd-mobile.  It had to do with setting up buffers in the modem.  
Later versions did not have this problem with the computers I use.

Jim Flowers <jflowers@ezo.net>
#4 ISP on C|NET, #1 in Ohio

On Tue, 13 Jul 1999, FreeBSD MAIL wrote:

> I have a WaveLAN ISA adaptor.
> 
> I am trying to run it in a machine equiped with an AMD K6-2 350
> processor running at 66mhz bus speed.
> I am getting the following error while ifconfiging the card.
> 
> ifconfig wl0 192.168.10.1
> wl0: diag() failed; status = 0, inw = 0, outw = e0a0
> wl0: diag() failed; status = 0, inw = 0, outw = e0a0
> scb_status a000
> scb_status a000
> scb_command 0
> scb_command 0
> scb_cbl ffc0
> scb_cbl ffc0
> cu_cmd 8007
> cu_cmd 8007
> wl0 init(): trouble resetting board.
> wl0 init(): trouble resetting board.
> 
> 
> I belive the issure is some kind of timeing problem because the dos
> drivers and ptpdiag work and the card works with freebsd in other
> machines.
> 
> I have tried about everything I can think of I have set
> machdep.wl_xmit_delay:   up and down
> as well as played with clock speeds of the CPU and motherboard as well
> as bios wait states, pnp settings ect. and differant wavelan cards.
> 
> I even reset the factory setting off 0x300 irq 10 to other ones just  to
> 
> be sure.. I have tried the
> drivers in 3.0 3.1 and 4.0 current they all do the same thing..
> 
> thease are the current dmesg settings
> 
> wl0 at 0x390-0x39f irq 5 on isa
> wl0: address 08:00:6a:2b:e3:30, NWID 0x5262, Freq 2422 MHz
> 
> and the wlconfig info...
> cray100 /root 6% wlconfig wl0
> Board type            : ISA
> Base address options  : 0x300, 0x390, 0x3c0, 0x3e0
> Waitstates            : 0
> Bus mode              : ISA
> IRQ                   : 5
> Default MAC address   : 08:00:6a:2b:e3:30
> Soft MAC address      : 00:00:00:00:00:00
> Current MAC address   : Default
> Adapter compatability : PCCARD or 1/2 size AT, 915MHz or 2.4GHz
> Threshold preset      : 1
> Call code required    : NO
> Subband               : 915MHz/see WaveModem
> Quality threshold     : 3
> Hardware version      : 1 (Rel3)
> Network ID enable     : YES
> NWID                  : 0x5262
> Datalink security     : NO
> Databus width         : 16 (variable)
> Configuration state   : unconfigured
> CRC-16                : 0xaba1
> CRC status            : OK
> 
> If anyone can help in any way or point me to someone who might
> I would greatly apreciate it.
> 
> Thanks in advance
> 
> Richard Puga
> puga@mauibuilt.com
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message