Date: Sun, 17 Feb 2008 09:02:56 -0600 From: Drew Sanford <lauasanf@wilderness.homeip.net> To: questions@freebsd.org Subject: PHP cli segfaults Message-ID: <47B84CA0.2010509@wilderness.homeip.net>
next in thread | raw e-mail | index | archive | help
Command line programs for php seem to segfault on a 7.0RC1 box (yes, I know, I should update to RC2) - for example: root@colossus(~/bin)$ php -v PHP 5.2.5 with Suhosin-Patch 0.9.6.2 (cli) (built: Feb 9 2008 13:03:20) Copyright (c) 1997-2007 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies zsh: segmentation fault (core dumped) php -v Any pointers? Just update and see if that fixes it? Thanks in advance. uname output: FreeBSD colossus.cotharyus.net 7.0-RC1 FreeBSD 7.0-RC1 #0: Sat Feb 9 11:43:37 CST 2008 root@colossus.cotharyus.net:/usr/obj/usr/src/sys/GENERIC i386 dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RC1 #0: Sat Feb 9 11:43:37 CST 2008 root@colossus.cotharyus.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2010.32-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x3<LAHF,CMP> Cores per package: 2 real memory = 2147418112 (2047 MB) avail memory = 2091855872 (1994 MB) ACPI APIC Table: <Nvidia AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 9 2008 11:43:18) acpi0: <Nvidia AWRDACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <Cool`n'Quiet K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <Cool`n'Quiet K8> on cpu1 device_attach: powernow1 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xdd003000-0xdd003fff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered pci0: <multimedia, audio> at device 4.0 (no driver attached) atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem 0xdd001000-0xdd001fff irq 21 at device 7.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc000-0xc00f mem 0xdd000000-0xdd000fff irq 22 at device 8.0 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci5: <ACPI PCI bus> on pcib1 dc0: <82c169 PNIC 10/100BaseTX> port 0xa000-0xa0ff mem 0xdc045000-0xdc0450ff irq 16 at device 6.0 on pci5 miibus0: <MII bus> on dc0 bmtphy0: <BCM5201 10/100baseTX PHY> PHY 1 on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:a0:cc:40:93:80 dc0: [ITHREAD] em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xa400-0xa43f mem 0xdc000000-0xdc01ffff,0xdc020000-0xdc03ffff irq 17 at device 7.0 on pci5 em0: Ethernet address: 00:0e:0c:2f:00:ba em0: [FILTER] fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdc044000-0xdc0447ff,0xdc040000-0xdc043fff irq 16 at device 11.0 on pci5 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:86:18:47 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1368000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:86:18:47 fwe0: Ethernet address: 02:11:d8:86:18:47 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:11:d8:00:00:86:18:47 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci2: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci1: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd0000000-0xd7ffffff,0xd9000000-0xd9ffffff irq 18 at device 0.0 on pci1 acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff,0xdb000-0xdc7ff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled,firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rule-based forwarding disabled, default to deny, logging disabled hptrr: no controller detected. ad0: 43979MB <IBM DTLA-307045 TX6OA6AA> at ata0-master UDMA100 ad2: 38166MB <WDC WD400BB-22CAA0 16.06V16> at ata1-master UDMA100 acd0: DVDR <HL-DT-STDVD-RAM GSA-H22L/1.00> at ata1-slave UDMA66 ad4: 381554MB <SAMSUNG HD403LJ CT100-10> at ata2-master SATA300 ad6: 381554MB <SAMSUNG HD403LJ CT100-10> at ata3-master SATA300 ad8: 76319MB <Seagate ST380013AS 3.18> at ata4-master SATA150 ad10: 76319MB <Seagate ST380013AS 3.18> at ata5-master SATA150 ar0: 763108MB <nVidia MediaShield RAID0 (stripe 64 KB)> status: READY ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master ar1: 152638MB <nVidia MediaShield RAID0 (stripe 64 KB)> status: READY ar1: disk0 READY using ad8 at ata4-master ar1: disk1 READY using ad10 at ata5-master SMP: AP CPU #1 Launched!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47B84CA0.2010509>