From owner-freebsd-questions Fri Feb 18 17:11:58 2000 Delivered-To: freebsd-questions@freebsd.org Received: from mug.adhesivemedia.com (mug.adhesivemedia.com [207.202.159.73]) by hub.freebsd.org (Postfix) with ESMTP id 5206A37BB2F for ; Fri, 18 Feb 2000 17:11:37 -0800 (PST) (envelope-from philip@adhesivemedia.com) Received: from localhost (philip@localhost) by mug.adhesivemedia.com (8.9.3/8.9.3) with ESMTP id RAA07316 for ; Fri, 18 Feb 2000 17:13:02 -0800 (PST) (envelope-from philip@adhesivemedia.com) Date: Fri, 18 Feb 2000 17:13:02 -0800 (PST) From: Philip Hallstrom To: freebsd-questions@freebsd.org Subject: Seagate 224000N Tape drive setup??? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi - I've installed a Seagate 224000N (Scorpion) tape drive in my freebsd box (3.2-19990615-STABLE). dmesg reports: sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) (There is a dip switch that can be set to change the identity string to "SEAGATE DAT ") The tape drive is not at the end of the chain so no scsi termination set. The manual says that for certain unix flavors to set dip switches 9 and 10 to either on or off (FreeBSD is not listed). They are currently both off. All the devices are there: root@anw:~% ls /dev/*sa* /dev/ersa0 /dev/ersa0.2 /dev/nrsa0.0 /dev/nrsa0.3 /dev/rsa0.1 /dev/rsa0.ctl /dev/ersa0.0 /dev/ersa0.3 /dev/nrsa0.1 /dev/rsa0 /dev/rsa0.2 /dev/ersa0.1 /dev/nrsa0 /dev/nrsa0.2 /dev/rsa0.0 /dev/rsa0.3 root@anw:~% mt status mt: /dev/nrsa0: Input/output error And in the logs I get: (sa0:ahc0:0:1:0): RESERVE(06). CDB: 16 0 0 0 0 0 (sa0:ahc0:0:1:0): HARDWARE FAILURE asc:44,90 What am I missing? Also - what are the *.[123] device entries? Thanks! -philip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message