Date: Mon, 22 Jun 2020 14:40:58 +0800 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: Furkan Salman <furkan@fkardame.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: New to FreeBSD. Build images for Arm Devices. Message-ID: <CAGtf9xOAiydS9H5jFwjFBNhfs89WYoQuJAUHn6=17pgmwFD6WA@mail.gmail.com> In-Reply-To: <172d65544f8.f0b9af5c328283.1070861385504513343@fkardame.com> References: <172d65544f8.f0b9af5c328283.1070861385504513343@fkardame.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jun 21, 2020 at 6:03 PM Furkan Salman <furkan@fkardame.com> wrote: > Hello Everyone, > > > > I am new to FreeBSD and I have started to look into building FreeBSD > images for arm64 devices, Like Khadas Edge-V, Radxa RockPi E and Khadas > VIm1. > > > > Sir Ganbold and Sergey have been helping me with testing and > troubleshooting issues on getting an existing image built for Pine64-Rock64 > to boot on RockPiE as both are similar SOC. > Did you try erasing eMMC and booting from SD only? Please show us boot verbose (boot -v) log when booting from SD. thanks, Ganbold > > > > I have a working Khadas Edge-V on FreeBSD, Thanks to Sergey for his hard > work for supporting this device. Next he is working on Khadas VIm1 which is > Amlogic S905X SOC. > > > > I have good understanding with uboot build process on linux side and it is > almost the same for bsd, Though I cannot write any driver I can only build > and package stuff. > > > Currently I understand on how I can build uboot and build kernel with > device specific config, next I need to understand how the kernel is > connected to vendor dts/dtb. > > > If anyone can help me understand this then I can try to build some test > images for the devices that I have. > > > > Regards, > > Furkan K. > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xOAiydS9H5jFwjFBNhfs89WYoQuJAUHn6=17pgmwFD6WA>