Date: Sun, 29 Mar 2009 11:01:53 +0200 From: Marc "UBM" Bocklet <ubm@u-boot-man.de> To: Marc "UBM" Bocklet <ubm@u-boot-man.de> Cc: freebsd-stable@freebsd.org Subject: Re: problems with sata disks (taskqueue timeout) Message-ID: <20090329110153.f625612f.ubm@u-boot-man.de> In-Reply-To: <20090120080829.b4006877.ubm@u-boot-man.de> References: <20090119202016.11f42e3b.ubm.freebsd@gmail.com> <49750137.7020105@modulus.org> <20090120080829.b4006877.ubm@u-boot-man.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 20 Jan 2009 08:08:29 +0100 Marc "UBM" Bocklet <ubm@u-boot-man.de> wrote: > On Tue, 20 Jan 2009 09:39:51 +1100 > Andrew Snow <andrew@modulus.org> wrote: > > > > > I think that if you use eSATA you probably need dedicated eSATA > > controller ports. eSATA standard specifies a higher voltage for > > the longer cable distances. > > > > Judging from the sporadic problem reports, Promise TX4 is probably > > not the best at signal purity to begin with so using it for eSATA > > pushes it over the edge. > > > > > > Hope that helps, > > Thanks for the fast answer! :-) > > Although my version of the TX4 has two dedicated e-sata ports, the > other posts seem to indicate that it got something to do with the > controller (maybe signal purity, like you said). I'll try upgrading > next and will report back after that. A very late followup here: I upgraded to the latest stable, but things did not improve: Mar 29 10:57:29 hamstor kernel: ad10: WARNING - WRITE_DMA48 UDMA ICRC error (retrying request) LBA=1087300992 Mar 29 10:57:34 hamstor kernel: ad10: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> Mar 29 10:57:34 hamstor kernel: ad10: TIMEOUT - WRITE_DMA48 retrying (0 retries left) LBA=1087300992 Mar 29 10:57:34 hamstor kernel: ad10: FAILURE - WRITE_DMA48 status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=ff<ICRC,UNCORRECTABLE,MEDIA_CHANGED,NID_NOT_FOUND,MEDIA_CHANGE_REQEST,ABORTED,NO_MEDIA,ILLEGAL_LENGTH> LBA=1087300992 Mar 29 10:57:34 hamstor root: ZFS: vdev I/O failure, zpool=gedaerm path=/dev/ad10 offset=556698042368 size=131072 error=5 Mar 29 10:57:43 hamstor kernel: ad10: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Mar 29 10:57:47 hamstor kernel: ad10: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Mar 29 10:57:51 hamstor kernel: ad10: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Mar 29 10:57:55 hamstor kernel: ad10: WARNING - SET_MULTI taskqueue timeout - completing request directly Mar 29 10:57:55 hamstor kernel: ad10: TIMEOUT - WRITE_DMA48 retrying (1 retry left) LBA=1087301248 Mar 29 10:57:55 hamstor kernel: ad10: WARNING - WRITE_DMA48 UDMA ICRC error (retrying request) LBA=1087301248 Mar 29 10:58:00 hamstor kernel: ad10: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> Mar 29 10:58:00 hamstor kernel: ad10: FAILURE - WRITE_DMA48 timed out LBA=1087301248 Mar 29 10:58:00 hamstor root: ZFS: vdev I/O failure, zpool=gedaerm path=/dev/ad10 offset=556698173440 size=131072 error=5 Any further ideas anybody? :-) Bye Marc -- "And what rough beast, its hour come round at last, Slouches towards Bethlehem to be born?" W.B. Yeats, The Second Coming
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090329110153.f625612f.ubm>