Date: Tue, 19 Nov 2013 13:48:40 +0530 From: Amitabh Kant <amitabhkant@gmail.com> To: Max Khon <fjoe@samodelkin.net> Cc: Harald Schmalzbauer <h.schmalzbauer@omnilan.de>, FreeBSD Stable <freebsd-stable@freebsd.org>, freebsd-isdn@freebsd.org Subject: Re: 9.2 panic with wcb4xxp (dahdi-kmod26-2.6.1.r10738) Message-ID: <CAPTAQBJqEcDcAn%2BENPEU=wHyX-OAuTeTB93mUEqxOJ-bkHAQoQ@mail.gmail.com> In-Reply-To: <CADe0-4nGJY9vWXYm31-3r44mpduhVGZ8s-Fi3BUYBnHcxJ3L-g@mail.gmail.com> References: <523B04C3.30100@omnilan.de> <CAPTAQBJrhpmvLHdmDP3Rnrm%2BEYfVr_bA6GHVXzfGDY=qY4aW-g@mail.gmail.com> <52405797.9020609@omnilan.de> <CAPTAQBLk3Ywhx4opXXLQW=AKnDmzFNk0GBE9oSa5T0o97arbZg@mail.gmail.com> <CADe0-4nGJY9vWXYm31-3r44mpduhVGZ8s-Fi3BUYBnHcxJ3L-g@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Max I could not find any info on setting those module parameters. Is there a place where I can more info on how to set those supported parameters in FreeBSD Amitabh On Mon, Nov 18, 2013 at 6:02 PM, Max Khon <fjoe@samodelkin.net> wrote: > Amitabh, > > I suppose you are wrong about missing sysctls. Almost all dahdi module > parameters are settable using kenv and then (after the driver is > loaded) are visible via sysctl. > > Max > > On Tue, Sep 24, 2013 at 7:45 AM, Amitabh Kant <amitabhkant@gmail.com> > wrote: > > On Mon, Sep 23, 2013 at 8:30 PM, Harald Schmalzbauer < > > h.schmalzbauer@omnilan.de> wrote: > > > >> Bez=FCglich Amitabh Kant's Nachricht vom 21.09.2013 03:24 (localtime)= : > >> > On Thu, Sep 19, 2013 at 7:35 PM, Harald Schmalzbauer > >> > <h.schmalzbauer@omnilan.de <mailto:h.schmalzbauer@omnilan.de>> wrote= : > >> > > >> > Hello, > >> > > >> > unloading the kernel module of dahdi-kmod26-2.6.1.r10738 leads t= o > >> this > >> > panic: > >> > > >> > > >> > <snip> > >> > > >> > wcb4xxp0: <6>Did not do the highestorder stuff > >> > <6>dahdi: Detected time shift. > >> > <5>dahdi_echocan_mg2: Registered echo canceler 'MG2' > >> > > >> > Starting asterisk afterwards also leads to panic. > >> > I guess dahdi development stalled, but I wanted to try it becaus= e > I'd > >> > prefer freeswitch and need BRI support... > >> > Is somebody familiar with dahdi and interested in making it work > with > >> > FreeBSD 9.2? > >> > > >> > Thanks, > >> > > >> > -Harry (not subscribed to isdn@) > >> > > >> > > >> > > >> > Have you been able to solve the problem? I am running Freeswitch (fr= om > >> > git, not port) and dahdi/dahdi-kmod26 (from port) with PRI line > >> > (Digium 8 span and single span) without any problems on 9.1. Will te= st > >> > it on 9.2 and get back to you if I see a panic . > >> Hello Amitabh, > >> > >> couldn't solve my problem. > >> First, dahdi_scan doesn't detect ports jumpered to NT mode. I need 2 > ports > >> in NT mode, so trying anything else with dahdi before my settings get > >> correctly recognized is probably not worth the time. > >> Also I have to investigate if it is still true that libpri doesn't > support > >> ptmp in NT mode!?! > >> In general, the freebsd dahdi port doesn't seem to be in good shape; > >> Couldn't find any docs about sysctls (dahdi.wcb4xxp.teignorered, '-d' > shows > >> nothing :-( ), no man page =96 hard to find out anything about dahdi i= n > >> FreeBSD, not even the supported hardwhere seems to be documentend > >> anywhere... > >> > >> Any hints highly appreciated, although I think the better way was to > teach > >> FreeTDM speaking CAPI. HPS does a great job keeping all kind of ISDN > >> hardware supported by i4b (ISDN4BSD)! > >> Or to make chan_capi work with asterisk11 =96 the lesser evil than > fighting > >> dahid... > >> > >> Thanks, > >> > >> -Harry > >> > >> > >> > > Hello Harry > > > > Sadly, there is not much help while installing/using dahdi on FreeBSD. > > There does not seem to by any sysctls defined for dahdi which are neede= d > to > > set for certain cards. Infact, for the 8 span card, to change the defau= lt > > T1 to E1, I had to make changes in the code directly. > > > > > > Amitabh > > _______________________________________________ > > freebsd-stable@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.or= g > " >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPTAQBJqEcDcAn%2BENPEU=wHyX-OAuTeTB93mUEqxOJ-bkHAQoQ>