Date: Fri, 10 Aug 2007 08:30:32 +0100 From: Bruce Cran <bruce@cran.org.uk> To: Thomas.Sparrevohn@btinternet.com Cc: 'Artem Naluzhny' <tut@nhamon.com.ua>, acpi@freebsd.org, current@freebsd.org Subject: Re: RE: Reboot on "shutdown -r" hangs after final "uptime ..." string Message-ID: <46BC1418.9070008@cran.org.uk> In-Reply-To: <002501c7973a$eac3db30$c04b9190$@Sparrevohn@btinternet.com> References: <65dfa4fc0705151353v1eb9a16dsff46c9f6ea6f4b63@mail.gmail.com> <002501c7973a$eac3db30$c04b9190$@Sparrevohn@btinternet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thomas Sparrevohn wrote: > I have the same problem - just as a test try to load a kernel without any USB drivers at all > And shutdown - on my machine it the ACPI part works - however the system hangs during the device > Shutdown phase - this machine is a dell as well - would be nice if somebody using other than dell has the > problem > I'm running 7.0-CURRENT and am seeing the same problem on my Dell Inspiron 1501 amd64 laptop. This machine has OHCI and EHCI controllers; removing the EHCI driver solves the problem and allows the computer to reboot properly. I initially thought it was an ACPI problem but now I'm not so sure - is there anything I can do to help debug it? I've added printfs to kern_shutdown.c and as far as I can see the last function to be called is shutdown_wait; since that doesn't do anything I know more is going on, but I don't know where to look. -- Bruce Cran > >> -----Original Message----- >> From: owner-freebsd-acpi@freebsd.org [mailto:owner-freebsd- >> acpi@freebsd.org] On Behalf Of Artem Naluzhny >> Sent: 15 May 2007 21:54 >> To: acpi@freebsd.org >> Subject: Reboot on "shutdown -r" hangs after final "uptime ..." string >> >> Hi >> >> I played with different combinations of debug.acpi.do_powerstate, >> hw.acpi.disable_on_reboot and hw.acpi.handle_reboot sysctls on my >> Inspiron 1501 notebook without success. Environment: >> >> FreeBSD 7.0-CURRENT #1: Thu May 10 21:22:20 EEST 2007 >> root@tut.intra:/usr/obj/usr/src/sys/TUT >> WARNING: WITNESS option enabled, expect reduced performance. >> Preloaded elf kernel "/boot/kernel/kernel" at 0xc082b000. >> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082b1c4. >> Calibrating clock(s) ... i8254 clock: 1193176 Hz >> CLK_USE_I8254_CALIBRATION not specified - using default frequency >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Calibrating TSC clock ... TSC clock: 1596011252 Hz >> CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz 686- >> class CPU) >> Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2 >> >> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG >> E,MCA,CMOV,PAT,PSE36,CLFLU >> SH,MMX,FXSR,SSE,SSE2,HTT> >> Features2=0x2001<SSE3,CX16> >> AMD >> Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> >> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> >> HTT bit cleared - FreeBSD does not have licensing issues requiring it. >> >> Cores per package: 2 >> Data TLB: 32 entries, fully associative >> Instruction TLB: 32 entries, fully associative >> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative >> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way >> associative >> L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way >> associative >> real memory = 937885696 (894 MB) >> Physical memory chunk(s): >> 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) >> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) >> 0x0000000000c28000 - 0x0000000036e6ffff, 908361728 bytes (221768 pages) >> avail memory = 908304384 (866 MB) >> Table 'FACP' at 0x37e7fb9a >> Table 'TCPA' at 0x37e7fc0e >> Table 'SSDT' at 0x37e7fc40 >> Table 'APIC' at 0x37e7fdc2 >> MADT: Found table at 0x37e7fdc2 >> MP Configuration Table version 1.4 found at 0xc009e171 >> APIC: Using the MADT enumerator. >> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled >> SMP: Added CPU 0 (AP) >> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled >> SMP: Added CPU 1 (AP) >> ACPI APIC Table: <PTLTD APIC > >> INTR: Adding local APIC 1 as a target >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> bios32: Found BIOS32 Service Directory header at 0xc00f84a0 >> bios32: Entry = 0xfdc84 (c00fdc84) Rev = 0 Len = 1 >> pcibios: PCI BIOS entry at 0xfdc80+0x0 >> pnpbios: Found PnP BIOS data at 0xc00f8540 >> pnpbios: Entry = e5d0:9499 Rev = 1.0 >> Other BIOS signatures found: >> APIC: CPU 0 has ACPI ID 0 >> APIC: CPU 1 has ACPI ID 1 >> ACPI: RSDP @ 0x0xf8500/0x0014 (v 0 PTLTD ) >> ACPI: RSDT @ 0x0x37e79578/0x0040 (v 1 DELL M08 0x06040000 LTP >> 0x00000000) >> ACPI: FACP @ 0x0x37e7fb9a/0x0074 (v 1 ATI Bowfin 0x06040000 ATI >> 0x000F4240) >> ACPI: DSDT @ 0x0x37e795b8/0x65E2 (v 1 ATI SB600 0x06040000 MSFT >> 0x03000000) >> ACPI: FACS @ 0x0x37e90fc0/0x0040 >> ACPI: TCPA @ 0x0x37e7fc0e/0x0032 (v 2 AMD 0x06040000 PTEC >> 0x00000000) >> ACPI: SSDT @ 0x0x37e7fc40/0x0182 (v 1 PTLTD POWERNOW 0x06040000 LTP >> 0x00000001) >> ACPI: APIC @ 0x0x37e7fdc2/0x0054 (v 1 PTLTD APIC 0x06040000 >> LTP 0x00000000) >> ACPI: MCFG @ 0x0x37e7fe16/0x003C (v 1 PTLTD MCFG 0x06040000 LTP >> 0x00000000) >> ACPI: HPET @ 0x0x37e7fe52/0x0038 (v 1 PTLTD HPETTBL 0x06040000 LTP >> 0x00000001) >> ACPI: SLIC @ 0x0x37e7fe8a/0x0176 (v 1 DELL M08 0x06040000 LTP >> 0x00000000) >> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 >> ioapic0: Routing external 8259A's -> intpin 0 >> lapic0: Routing NMI -> LINT1 >> lapic0: LINT1 trigger: edge >> lapic0: LINT1 polarity: high >> lapic1: Routing NMI -> LINT1 >> lapic1: LINT1 trigger: edge >> lapic1: LINT1 polarity: high >> MADT: Forcing active-low polarity and level trigger for SCI >> ioapic0: intpin 9 polarity: low >> ioapic0: intpin 9 trigger: level >> ioapic0 <Version 2.1> irqs 0-23 on motherboard >> cpu0 BSP: >> ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 >> io: <I/O> >> null: <null device, zero device> >> random: <entropy source, Software, Yarrow> >> kbd: new array size 4 >> kbd1 at kbdmux0 >> mem: <memory> >> Pentium Pro MTRR support enabled >> npx0: INT 16 interface >> acpi0: <DELL M08 > on motherboard >> ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 >> acpi0: [MPSAFE] >> acpi0: [ITHREAD] >> pci_open(1): mode 1 addr port (0x0cf8) is 0x80009020 >> pci_open(1a): mode1res=0x80000000 (0x80000000) >> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=59501002) >> pcibios: BIOS_PRESENT call failed >> AcpiOsDerivePciId: bus 0 dev 18 func 0 >> AcpiOsDerivePciId: bus 0 dev 17 func 0 >> acpi0: Power Button (fixed) >> acpi0: wakeup code va 0xd5a40000 pa 0x9c000 >> AcpiOsDerivePciId: bus 0 dev 20 func 1 >> unknown: I/O range not supported >> AcpiOsDerivePciId: bus 0 dev 0 func 0 >> AcpiOsDerivePciId: bus 0 dev 20 func 0 >> acpi0: reservation of 0, 1000 (3) failed >> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 >> acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0 >> >> >> Any suggestions? >> >> -- >> tut >> DaRK VoIP GuRU >> _______________________________________________ >> freebsd-acpi@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46BC1418.9070008>