Date: Thu, 04 Dec 2003 13:31:03 +0100 From: guido sintoni <gs@willystudios.com> To: openoffice@freebsd.org Cc: stucchi@willystudios.com Subject: it-openoffice-1.1 package available Message-ID: <3FCF2907.3040000@willystudios.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] dear sirs (afaik, dear martin), i'm one of massimiliano stucchi's friends. i upgraded my workstation from freebsd 5.1p10 to 5.2-beta and i noticed my previous package of openoffice 1.1 didn't work anymore. so i made another package and it works fine. you can download it from www.willystudios.com/openoffice feel free to include it in your http://projects.imp.ch/openoffice/ page, if you like it. formerly, i sent you (through massimiliano) the english and the italian version for openoffice 1.1 (freebsd-stable). the package was built with ttf_bytecode enabled and support for gif images. here's the kernel of the machine used to compile and to make the package: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-BETA #0: Sun Nov 30 18:39:11 CET 2003 guido@jill.ufficio:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a77000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 1.80GHz (2015.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf13 Stepping = 3 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536805376 (511 MB) avail memory = 511770624 (488 MB) Pentium Pro MTRR support enabled acpi0: <AMIINT SiS645XX> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f7a60 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTC is routed to irq 11 pcib0: slot 3 INTA is routed to irq 11 pcib0: slot 3 INTB is routed to irq 11 pcib0: slot 3 INTC is routed to irq 5 pcib0: slot 3 INTD is routed to irq 11 pcib0: slot 4 INTA is routed to irq 11 pcib0: slot 8 INTA is routed to irq 5 agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 5 pcib1: slot 0 INTA is routed to irq 5 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 96X UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 11 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 11 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub2: 4 ports with 4 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xdfffe000-0xdfffefff irq 5 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: <usb2: USB revision 1.0 uhub3: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xdfffb000-0xdfffbfff irq 11 at device 4.0 on pci0 sis0: Ethernet address: 00:0a:e6:21:28:55 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xdfffa800-0xdfffafff irq 5 at device 8.0 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 8. fwohci0: EUI64 00:11:06:00:00:00:9a:13 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:06:00:9a:13 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi_button1: <Sleep Button> on acpi0 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 acpi_cpu1: <CPU> on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 fdc0: cmd 3 failed at out byte 1 of 3 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2015803280 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc4999760 ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA133 GEOM: create disk ad1 dp=0xc4999460 ad1: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-slave UDMA133 acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-119 0105> at ata1-master PIO4 acd1: CDRW <AOPEN CD-RW CRW4850 1.04 20021101> at ata1-slave PIO4 the kernel was the GENERIC. the system was built on nov 30, 2003. FreeBSD jill.ufficio 5.2-BETA FreeBSD 5.2-BETA #0: Sun Nov 30 18:39:11 CET 2003 guido@jill.ufficio:/usr/obj/usr/src/sys/GENERIC i386 cheers, -- guido sintoni (gs@willystudios.com) freelance journalist powered by *bsd free for fun (www.freebsd.org) open for masochism (www.openbsd.org) net for... what is net? :) (www.netbsd.org) [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/zykMKwKrcN0KtokRAkyfAJwPfK1/LUY/aVlPrPfB92Dxr4nz+gCfaWMk 8oRPnzo0AuWCv0bLDMkTSYU= =lCFo -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FCF2907.3040000>