Date: Thu, 21 Dec 1995 18:00:15 -0500 (EST) From: Chuck Robey <chuckr@glue.umd.edu> To: Patrick <Patrick@dnet.it> Cc: questions@FreeBSD.ORG Subject: Re: your mail Message-ID: <Pine.SUN.3.91.951221175919.13946B-100000@latte.eng.umd.edu> In-Reply-To: <199512211825.TAA05693@ns.dnet.it>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 21 Dec 1995, Patrick wrote: > This is the configuration of my kernel: > my machine is a pentium 90 with a sound card can yuo help me? > # > # Kernel di Erica -- 194.177.110.4 with WD/AHx/NCR/BTx family disks > # > # $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $ > # Well, for one thing, the npx0 device is not optional, you _must_ put it back in. You don't have a choice on that. > > machine "i386" > cpu "I386_CPU" > cpu "I486_CPU" > cpu "I586_CPU" > ident Erica > maxusers 10 > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options NFS #Network Filesystem > options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 > options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device > options BOUNCE_BUFFERS #include support for DMA bounce buffers > options UCONSOLE #Allow users to grab the console > > options SYSVSHM > options SYSVSEM > options SYSVMSG > > config kernel root on wd0 > > controller isa0 > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr > disk fd0 at fdc0 drive 0 > #disk fd1 at fdc0 drive 1 > #tape ft0 at fdc0 drive 2 > > controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr > disk wd0 at wdc0 drive 0 > disk wd1 at wdc0 drive 1 > > #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr > #disk wd2 at wdc1 drive 0 > #disk wd3 at wdc1 drive 1 > > options ATAPI #Enable ATAPI support for IDE bus > device wcd0 #IDE CD-ROM > > #controller ncr0 > #controller ahc0 > > #controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr > #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr > #controller ahc1 at isa? bio irq ? vector ahcintr > #controller ahb0 at isa? bio irq ? vector ahbintr > #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr > #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr > #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr > #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr > #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr > > controller scbus0 > > device sd0 > > #device st0 > > device cd0 #Only need one of these, the code dynamically grows > > #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr > #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr > #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr > > #controller matcd0 at isa? port 0x230 bio > > device scd0 at isa? port 0x230 bio > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint > #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 > #options XSERVER # include code for XFree86 > > #device npx0 at isa? port "IO_NPX" irq 13 vector npxintr > > device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr > device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr > device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr > device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr > > device lpt0 at isa? port? tty irq 7 vector lptintr > #device lpt1 at isa? port? tty > #device mse0 at isa? port 0x23c tty irq 5 vector mseintr > device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr > > # Order is important here due to intrusive probes, do *not* alphabetize > # this list of network interfaces until the probes have been fixed. > # Right now it appears that the ie0 must be probed before ep0. See > # revision 1.20 of this file. > #device de0 > #device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr > #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr > #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr > device ep0 at isa? port 0x300 net irq 10 vector epintr > #device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector > ixintr > #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr > #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr > #device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr > #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr > #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr > > pseudo-device loop > pseudo-device ether > pseudo-device log > #pseudo-device sl 1 > # ijppp uses tun instead of ppp device > pseudo-device ppp 1 > pseudo-device tun 1 > pseudo-device pty 16 > pseudo-device gzip # Exec gzipped a.out's > > ------------------------------------------------------------------------------- > Stuflesser Patrick Tel. 0471/555503 > D.Net S.r.l. FAX: 0471/555500 > Via Galvani str. 33 E-Mail: Patrick@dnet.it > 39100 BOZEN/BOLZANO > > > > ============================================================================ Chuck Robey chuckr@eng.umd.edu -- I run FreeBSD on n3lxx and Journey2 --------------------------------------------------------------------------- The Dilbert Zone is Dilbert's new WWW home! The area features never-before-seen original sketches of Dilbert, a photo tour of Scott Adams' studio, Dilbert Trivia and memorabilia, high school photos and much more!: <URL:http://www.unitedmedia.com/comics/dilbert/>;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SUN.3.91.951221175919.13946B-100000>