Date: Fri, 14 Oct 2005 13:36:21 +0100 From: "Lawrence Farr" <freebsd-hw@epcdirect.co.uk> To: "'Jia-Shiun Li'" <jiashiun@gmail.com> Cc: freebsd-current@freebsd.org, freebsd-hardware@freebsd.org Subject: RE: SATA Ports not found on Asus P5LD2-VM Message-ID: <01a101c5d0bb$e1c05ff0$c806a8c0@lfarr> In-Reply-To: <1d6d20bc0510140405g46ce76aei@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message-----
> From: owner-freebsd-hardware@freebsd.org
> [mailto:owner-freebsd-hardware@freebsd.org] On Behalf Of Jia-Shiun Li
> Sent: 14 October 2005 12:06
> To: Lawrence Farr
> Cc: freebsd-current@freebsd.org; freebsd-hardware@freebsd.org
> Subject: Re: SATA Ports not found on Asus P5LD2-VM
>
> 2005/10/11, Lawrence Farr <freebsd-hw@epcdirect.co.uk>:
> > Apologies, here's the rest of it
> >
> > I have an Asus P5LD2-VM motheroard:
>
> >
> > Any ideas anyone?
>
> You have your ICH7 configured to IDE-compatible mode, and there is
> apparently driver problems with it. Try setting it to ACHI mode. ICH7
> ids was added by Soren but not tested. It would be very appreciated if
> you can test both configurations and attach complete verbose dmesgs to
> sos@ and current@.
I have tried with all 3 settings, but only 2 of the 4 ICH7 channels show up.
Verbose boot with it set to SATA mode follows below.
> If you disable the ITE controller in BIOS setting then OS will not be
It's got nothing connected to it.
Thanks anyway.
##############################
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #0: Tue Aug 23 12:45:39 BST 2005
root@nas-1.int.electronicpage.co.uk:/usr/obj/usr/src/sys/P6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
Hyperthreading: 2 logical CPUs
real memory = 1072300032 (1022 MB)
avail memory = 1040547840 (992 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xd800-0xd81f mem 0xcffe0000-0xcfffffff irq 10 at device 0.0 on pci2
em0: Ethernet address: 00:13:d4:46:b3:cb
em0: Speed:N/A Duplex:N/A
uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 5 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 10 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 7 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 3 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcfeffc00-0xcfefffff irq 5
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3200395968 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 381554MB <HDS724040KLSA80 KFAOA32A> at ata0-master SATA150
ad2: 476940MB <HDS725050KLA360 K2AOA10C> at ata1-master SATA150
Trying to mount root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done
All buffers synced.
unmount of /dev failed (BUSY)
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #0: Tue Aug 23 12:45:39 BST 2005
root@nas-1.int.electronicpage.co.uk:/usr/obj/usr/src/sys/P6
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b29000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b29174.
Calibrating clock(s) ... i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3200396304 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
Hyperthreading: 2 logical CPUs
real memory = 1072300032 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003ec6dfff, 1040486400 bytes (254025 pages)
avail memory = 1040547840 (992 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f7b00
pnpbios: Entry = f0000:879a Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27708086)
pcibios: BIOS version 2.10
Found $PIR table, 14 entries at 0xc00f7990
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 255 0 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 28 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 28 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 28 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 28 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 1 8 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 29 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 29 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 29 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 27 A 0x63 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 A 0x60 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 B 0x61 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 C 0x62 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 2 0 A 0x61 3 4 5 6 7 10 11 12 14 15
slot 1 1 9 A 0x69 3 4 5 6 7 10 11 12 14 15
slot 1 1 9 B 0x6a 3 4 5 6 7 10 11 12 14 15
slot 1 1 9 C 0x6b 3 4 5 6 7 10 11 12 14 15
slot 1 1 9 D 0x68 3 4 5 6 7 10 11 12 14 15
slot 2 1 10 A 0x6a 3 4 5 6 7 10 11 12 14 15
slot 2 1 10 B 0x6b 3 4 5 6 7 10 11 12 14 15
slot 2 1 10 C 0x68 3 4 5 6 7 10 11 12 14 15
slot 2 1 10 D 0x69 3 4 5 6 7 10 11 12 14 15
embedded 1 4 A 0x63 3 4 5 6 7 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2770, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2772, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 1, range 32, base cfd80000, size 19, enabled
map[14]: type 4, range 32, base 0000a400, size 3, enabled
map[18]: type 3, range 32, base d0000000, size 28, enabled
map[1c]: type 1, range 32, base cfe80000, size 18, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0)
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x2776, revid=0x02
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base cfe00000, size 19, enabled
found-> vendor=0x8086, dev=0x27d0, revid=0x01
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
pcib0: matched entry for 0.28.INTA (src \\_SB_.LNKA:0)
pcib0: slot 28 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x27d2, revid=0x01
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
pcib0: matched entry for 0.28.INTB (src \\_SB_.LNKB:0)
pcib0: slot 28 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x27c8, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type 4, range 32, base 0000a800, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKE:0)
pcib0: slot 29 INTA routed to irq 5 via \\_SB_.LNKE
found-> vendor=0x8086, dev=0x27c9, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKB:0)
pcib0: slot 29 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x27ca, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
map[20]: type 4, range 32, base 0000b400, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pcib0: slot 29 INTC routed to irq 7 via \\_SB_.LNKC
found-> vendor=0x8086, dev=0x27cb, revid=0x01
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=3
map[20]: type 4, range 32, base 0000b800, size 5, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKD:0)
pcib0: slot 29 INTD routed to irq 3 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x27cc, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base cfeffc00, size 10, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKE:0)
pcib0: slot 29 INTA routed to irq 5 via \\_SB_.LNKE
found-> vendor=0x8086, dev=0x244e, revid=0xe1
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b8, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27c0, revid=0x01
bus=0, slot=31, func=2
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x27da, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00000400, size 5, enabled
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pcib1: secondary bus 3
pcib1: subordinate bus 3
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.1 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xcff00000-0xcfffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x8086, dev=0x108b, revid=0x03
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base cffe0000, size 17, enabled
pcib2: (null) requested memory range 0xcffe0000-0xcfffffff: good
map[18]: type 4, range 32, base 0000d800, size 5, enabled
pcib2: (null) requested I/O range 0xd800-0xd81f: in range
pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKB:0)
pcib2: slot 0 INTA routed to irq 10 via \\_SB_.LNKB
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xd800-0xd81f mem 0xcffe0000-0xcfffffff irq 10 at device 0.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcffe0000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xd800
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:13:d4:46:b3:cb
em0: Speed:N/A Duplex:N/A
uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 5 at device
29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 10 at device
29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 7 at device
29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 3 at device
29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcfeffc00-0xcfefffff irq 5
at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xcfeffc00
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 1
pcib3: subordinate bus 1
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib3
pci1: physical bus=1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=01 ostat0=80 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=01 ostat0=80 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 3200396304 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad0: 381554MB <HDS724040KLSA80 KFAOA32A> at ata0-master SATA150
ad0: 781422768 sectors [775221C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad2: 476940MB <HDS725050KLA360 K2AOA10C> at ata1-master SATA150
ad2: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad2: Intel check1 failed
ad2: Adaptec check1 failed
adGEOM: new disk ad2
2: LSI (v3) check1 failed
ad2: LSI (v2) check1 failed
ad2: FreeBSD check1 failed
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01a101c5d0bb$e1c05ff0$c806a8c0>