From owner-freebsd-current@FreeBSD.ORG Tue Aug 26 12:50:20 2003 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B7E3E16A4C4 for ; Tue, 26 Aug 2003 12:50:20 -0700 (PDT) Received: from srv1.cosmo-project.de (srv1.cosmo-project.de [213.83.6.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3696943FDF for ; Tue, 26 Aug 2003 12:50:19 -0700 (PDT) (envelope-from andreas@klemm.apsfilter.org) Received: from srv1.cosmo-project.de (localhost [IPv6:::1]) by srv1.cosmo-project.de (8.12.9/8.12.9) with ESMTP id h7QJoFaK075541 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO) for ; Tue, 26 Aug 2003 21:50:17 +0200 (CEST) (envelope-from andreas@klemm.apsfilter.org) Received: (from uucp@localhost)h7QJoEHe075538 for current@freebsd.org; Tue, 26 Aug 2003 21:50:15 +0200 (CEST) (envelope-from andreas@klemm.apsfilter.org) Received: from titan.klemm.apsfilter.org (localhost.klemm.apsfilter.org [127.0.0.1]) by klemm.apsfilter.org (8.12.9/8.12.9) with ESMTP id h7QJlCbV003012 for ; Tue, 26 Aug 2003 21:47:12 +0200 (CEST) (envelope-from andreas@titan.klemm.apsfilter.org) Received: (from andreas@localhost) by titan.klemm.apsfilter.org (8.12.9/8.12.9/Submit) id h7QJlBNV003011 for current@freebsd.org; Tue, 26 Aug 2003 21:47:11 +0200 (CEST) Date: Tue, 26 Aug 2003 21:47:11 +0200 From: Andreas Klemm To: current@freebsd.org Message-ID: <20030826194711.GA2828@titan.klemm.apsfilter.org> References: <20030826180902.GO32483@elvis.mu.org> <20030826141734.W37007@alpha.yumyumyum.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20030826141734.W37007@alpha.yumyumyum.org> X-Operating-System: FreeBSD 5.1-CURRENT X-Disclaimer: A free society is one where it is safe to be unpopular User-Agent: Mutt/1.5.4i Subject: PCMCIA trouble with Xircom, "CIS is too long -- truncating" X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 26 Aug 2003 19:50:21 -0000 Hi, good and bad news. Good news is that -current installation CD-Rom (JPSNAP of yesterday) doesn't panic during boot anymore, which was the case previously (or when inserting the card). Thanks a lot, this is a very good progress, I'm very pleased ! But the fix opened another problem. The card isn't recognized by the FreeBSD anymore: [... kernel boot messages ...] Timecounters tick every 10.000 msec CIS is too long -- truncating pccard0: Card has no functions cbb0: PC Card activation failed [...] When trying to do installation, the NIC isn't found. The PCMCIA card is a: Xircom RealPort Ethernet 10/100+Modem 56, REM55G-100. Here a dump of the CIS: andreas@aklemm[ttyp0]{1001} ~ pccardc dumpcis Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x15 (Version 1 info), length = 59 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 45 74 68 65 72 6e 65 74 20 31 30 2f 020: 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36 00 43 030: 45 4d 35 36 00 31 2e 30 30 00 ff Version = 5.0, Manuf = [Xircom], card vers = [CreditCard Ethernet 10/100 + Modem 56] Addit. info = [CEM56],[1.00] Tuple #4, code = 0x88 (Unknown), length = 8 000: e8 11 bb 00 00 00 00 00 Tuple #5, code = 0x20 (Manufacturer ID), length = 5 000: 05 01 0a 11 46 PCMCIA ID = 0x105, OEM ID = 0x110a Tuple #6, code = 0x44 (Card init date), length = 4 000: 41 43 a1 28 Tuple #7, code = 0x1a (Configuration map), length = 5 000: 01 3f 80 ff 67 Reg len = 2, config register addr = 0xff80, last config = 0x3f Registers: XXX--XX- Tuple #8, code = 0x1b (Configuration entry), length = 20 000: e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8 02 07 010: f0 bc 8e 20 Config index = 0x27(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 4.5 x 100mA Wait scale Speed = 1.2 x 10 ms RDY/BSY scale Speed = 1.2 x 10 ms Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x2e8 block length = 0x8 IRQ modes: Level, Pulse, Shared IRQs: 2 3 4 5 7 9 10 11 15 Max twin cards = 0 Misc attr: (Power down supported) Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 1f 08 ea 60 e8 03 07 Config index = 0x1f Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 17 08 ea 60 f8 02 07 Config index = 0x17 Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 0f 08 ea 60 f8 03 07 Config index = 0xf Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x3f8 block length = 0x8 Tuple #12, code = 0x1b (Configuration entry), length = 3 000: 3f 08 63 Config index = 0x3f Card decodes 3 address lines, full 8/16 Bit I/O Tuple #13, code = 0x21 (Functional ID), length = 2 000: 02 00 Serial port/modem Tuple #14, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 5c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even Data bit - 7bit,8bit, Stop bit - 1bit,2bit Tuple #15, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5 Data modem services available: Tuple #16, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 0b 00 02 00 b5 Fax1/modem services available: Tuple #17, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #18, code = 0x22 (Functional EXT), length = 8 000: 04 06 00 10 a4 bb 11 e8 Network node ID: 00 10 a4 bb 11 e8 Tuple #19, code = 0x8a (Unknown), length = 12 000: 32 30 30 31 48 57 42 42 31 31 45 38 Tuple #20, code = 0x8b (Unknown), length = 4 000: 01 00 00 00 Tuple #21, code = 0x14 (No link), length = 0 Tuple #22, code = 0xff (Terminator), length = 0 2 slots found What more infos do you need ? Andreas /// -- Andreas Klemm - Powered by FreeBSD 4.8-STABLE Need a magic printfilter today ? -> http://www.apsfilter.org/