Date: Sat, 31 May 2003 13:43:21 GMT From: none@freebsd2.localnet10 To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/52822: 5.1-BETA2 problems with named/syslogd/if_sis at boot Message-ID: <200305311343.h4VDhLGY000652@freebsd2.localnet10> Resent-Message-ID: <200305311850.h4VIo4RI020325@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 52822 >Category: i386 >Synopsis: 5.1-BETA2 problems with named/syslogd/if_sis at boot >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat May 31 11:50:04 PDT 2003 >Closed-Date: >Last-Modified: >Originator: none >Release: FreeBSD 5.1-BETA i386 >Organization: >Environment: System: FreeBSD freebsd2.localnet10 5.1-BETA FreeBSD 5.1-BETA #0: Wed May 28 23:02:16 CDT 2003 root@freebsd2.localnet10:/usr/src/sys/i386/compile/5.1-BETA2 i386 ==================== boot messages ============================================ /boot/kernel/kernel text=0x440ca8 data=0x79720+0x80cf4 syms=[0x4+0x58490+0x4+0x6 8261] /boot/kernel/linux.ko text=0x15c78 data=0x10e4+0x70 syms=[0x4+0x2ab0+0x4+0x282f/ ] /boot/kernel/snd_emu10k1.ko text=0x4de0 data=0x664+0x4 syms=[0x4+0xc10+0x4+0xc5c ] loading required module 'snd_pcm' /boot/kernel/snd_pcm.ko text=0x13d38 data=0x2578+0x109c syms=[0x4+0x2bc0+0x4+0x2 f3c] /boot/kernel/snd_ich.ko text=0x3054 data=0x284 syms=[0x4+0x980+0x4+0x996] /boot/kernel/nvidia.ko text=0xefcb4 data=0xc7a0+0xd82c syms=[0x4+0xead0+0x4+0xbb 81] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... /boot/kernel/acpi.ko text=0x39bf4 data=0x1638+0xf68 syms=[0x4+0x5990+0x4+0x75d9- ] msgbuf cksum mismatch (read beab1, calc bf3f5) Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-BETA #0: Wed May 28 23:02:16 CDT 2003 root@freebsd2.localnet10:/usr/src/sys/i386/compile/5.1-BETA2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc08bf000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc08bf294. Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc08bf3ec. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08bf49c. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08bf548. Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc08bf5f4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08bf6a0. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 3080966940 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3080.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073676288 (1023 MB) avail memory = 1033748480 (985 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT SiS645XX> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f79a0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 o n pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <GeForce4 Ti 4600> mem 0xddb80000-0xddbfffff,0xd0000000-0xd7ffffff,0xde 000000-0xdeffffff irq 11 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 96X UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <SiS 7012> port 0xd000-0xd07f,0xd400-0xd4ff irq 5 at device 2.7 on pci0 pcm0: <C-Media Electronics CMI9739 AC97 Codec> ohci0: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 10 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 5 at device 3.1 o n pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) pcm1: <Creative EMU10K1> port 0xcc00-0xcc1f irq 5 at device 7.0 on pci0 pcm1: <SigmaTel STAC9708/11 AC97 Codec> sis0: <NatSemi DP83815 10/100BaseTX> port 0xc800-0xc8ff mem 0xdfffb000-0xdfffbff f irq 10 at device 8.0 on pci0 sis0: Ethernet address: 00:09:5b:1e:62:ec miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xdffff000-0 xdfffffff irq 5 at device 11.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs pci0: <network, ethernet> at device 15.0 (no driver attached) fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: cmd 3 failed at out byte 1 of 3 orm0: <Option ROM> at iomem 0xc0000-0xce7ff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IPv6 packet filtering initialized, default to accept, logging limited to 10 pack ets/entry ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to ac cept, logging unlimited IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad2: 38204MB <SAMSUNG SV4002H> [77622/16/63] at ata1-master UDMA100 acd0: CD-RW <SAMSUNG CDRW/DVD SM-348B> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 2 lun 0 sa0: <ECRIX VXA-1 2C8C> Removable Sequential Access SCSI-2 device sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST336752LW 0004> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enable d da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C) da1 at ahc0 bus 0 target 4 lun 0 da1: <SEAGATE ST34501N 0015> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da1: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C) da2 at ahc0 bus 0 target 6 lun 0 da2: < S7Z0> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enable d da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) Mounting root from ufs:/dev/da2s1a Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point. swapon: adding /dev/da2s1b as swap device Starting file system checks: /dev/da2s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s1a: clean, 705362 free (418 frags, 88118 blocks, 0.1% fragmentation) /dev/da2s1e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s1e: clean, 2023305 free (57 frags, 252906 blocks, 0.0% fragmentation) /dev/da2s1d: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s1d: clean, 3557750 free (48654 frags, 438637 blocks, 1.1% fragmentation ) /dev/da2s1f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s1f: clean, 3262378 free (3338 frags, 407380 blocks, 0.1% fragmentation) /dev/da2s1g: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s1g: clean, 2463087 free (1255 frags, 307729 blocks, 0.0% fragmentation) /dev/da2s1h: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s1h: clean, 2797393 free (17 frags, 349672 blocks, 0.0% fragmentation) hw.nvidia.registry.EnableAGPSBA: 0 -> 1 hw.nvidia.registry.EnableAGPFW: 0 -> 1 kern.ipc.shmmax: 33554432 -> 67108864 kern.ipc.shmall: 8192 -> 32768 Setting hostname: freebsd2.localnet10. Starting syslogd. May 31 13:17:56 <kern.emerg> syslogd: bind: Can't assign requested address syslogd: child pid 145 exited with return code 1 Starting named. opensocket_f: bind([0.0.0.0].0): Can't assign requested address Enabling ipfilter. IP Filter: already initialized IP Filter: already initialized IP Filter: already initialized IP Filter: already initialized sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.0.0.5 netmask 0xffffff00 broadcast 10.0.0.255 inet6 fe80::209:5bff:fe1e:62ec%sis0 prefixlen 64 tentative scopeid 0x1 ether 00:09:5b:1e:62:ec media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 filter sync'd add net default: gateway 10.0.0.254 Additional routing options:. Generating host.conf. ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Clearing /tmp. Starting local daemons:. Updating motd. Configuring syscons: blanktime. Starting sendmail. Initial i386 initialization:. Additional ABI support: linux. Starting cron. Local package initialization: logsurfer. warning: logsurfer started as root Additional TCP options: log_in_vain=1. Starting inetd. hw.bus.devctl_disable: 0 -> 1 Starting background file system checks in 60 seconds. Sat May 31 13:17:59 GMT 2003 FreeBSD/i386 (freebsd2.localnet10) (ttyv0) ================ rc.conf ============================================== # -- sysinstall generated deltas -- # Sat Apr 27 06:07:40 2002 # Created: Sat Apr 27 06:07:40 2002 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. # defaultrouter="10.0.0.254" hostname="freebsd2.localnet10" #ifconfig_rl0="inet 10.0.0.5 netmask 255.255.255.0" ifconfig_sis0="inet 10.0.0.5 netmask 0xffffff00" # kern_securelevel_enable="NO" nfs_reserved_port_only="YES" # named_enable="YES" named_flags="-u bind -g bind /etc/namedb/s/named.conf" # sendmail_enable="YES" #sendmail_enable="NO" #sendmail_flags="-L sm-mta -bd -q15m" # Flags to sendmail (as a server) #sendmail_submit_enable="YES" #sendmail_submit_flags="-L sm-mta -bd -q5m -ODaemonPortOptions=Name=submit-mta" #sendmail_outbound_enable="YES" #sendmail_outbound_flags="-L sm-queue -q5m" # Flags to sendmail (outbound only) #sendmail_msp_queue_enable="YES" #sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q5m" # sshd_enable="NO" usbd_enable="NO" moused_flags="-3" moused_enable="NO" linux_enable="YES" # lpd_enable='NO' lpd_flags="-ls" # (-s) LPD is used only to SEND prints; not accept prints # clear_tmp_enable="YES" # log_in_vain="YES" # log packets destined for unopened/nonexistant ports # ipfilter_enable="YES" ipfilter_rules="/etc/rc.firewall.rules.globaleyes" # ##ipmon_enable="YES" ##ipmon_flags="-aDpv /var/log/ipmon-log" # syslogd_enable="YES" syslogd_flags="-4 -v -v -a 10.0.0.254/32" # inetd_enable="YES" inetd_flags="-lwW" # >Description: At system boot of 5.1-BETA2, syslogd and named startup fail and if_sis appears to not be properly initialized even though boot messages show proper ifconfig values. After the boot has completed, syslogd and named are not running and attempts to ping anything other than loopback fails and sometimes returns a "buffer" error message. This did NOT happen under 5.1-BETA1. >How-To-Repeat: Reboot 5.1-BETA2 >Fix: Manually "recycle" if_sis (sis0) plus start named and syslogd. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305311343.h4VDhLGY000652>