Date: Mon, 22 Jan 2007 21:16:22 -0500 From: chris neill <chris@revolt.com> To: freebsd-questions@lists.freebsd.org Subject: 6.2-REL w/ SuperMicro Pentium D board, installer problem? Message-ID: <20070123021622.GA39711@revolt.com> Resent-Message-ID: <20070123031025.3E6F2B8B3@mail.cow.org>
next in thread | raw e-mail | index | archive | help
It is my understanding that the new Dualcore Pentiums fall under the auspices of the AMD64 port.. Anywho, whenever I try to run the bootonly installer, the boot stalls here: acd0: CDROM <Compaq CRN-8245B/1.16> at ata0-slave PIO4 If I run from an i386 kernel, everything is hunky-dorey. From dmesg: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 3.40GHz (3391.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf64 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 3756916736 (3582 MB) avail memory = 3677409280 (3507 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 ... acd0: CDROM <Compaq CRN-8245B/1.16> at ata0-slave PIO4 da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9550SX-8LP DISK 3.04> Fixed Direct Access SCSI-3 device da0: 100.000MB/s transfers da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C) da1 at twa0 bus 0 target 1 lun 0 da1: <AMCC 9550SX-8LP DISK 3.04> Fixed Direct Access SCSI-3 device da1: 100.000MB/s transfers da1: 953632MB (1953038336 512 byte sectors: 255H 63S/T 121571C) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/da0s1a em0: link state changed to UP I know the media works because I just used the same disc today to install 6.2-RELEASE on a Sun XFire X4200 (AMD Opteron). Any help would be greatly appreciated. -Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070123021622.GA39711>