Date: Fri, 13 Oct 2006 15:59:37 -0400 From: "fulan Peng" <fulanpeng@gmail.com> To: "John Baldwin" <jhb@freebsd.org> Cc: freebsd-current@freebsd.org, Dan Nelson <dnelson@allantgroup.com> Subject: Re: Please help to forward port 80 to 8800 with ipfw Message-ID: <bf0f1bc90610131259v6a275bc8t84ec713f90158e7f@mail.gmail.com> In-Reply-To: <200610131409.00126.jhb@freebsd.org> References: <bf0f1bc90610130746m311e56a0pa1531da9837a56c7@mail.gmail.com> <20061013151728.GA41884@dan.emsphone.com> <bf0f1bc90610131011i7c196bf4yb8e27462680a730e@mail.gmail.com> <200610131409.00126.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Thank you! I added 2 lines in the configuration file: options IPI_PREEMPTION device atpic It worked. uname -a shows the new kernel. But, now there is a problem: all remote users cannot login and I even cannot ping it from other machines. The port 80 and port 8800 are all locked. nestat -na |grep LIST shows all ports are listening. ps -Aw cannot find anything wrong. Cannot understand. Please help me to unlock them. Thanks a lot! On 10/13/06, John Baldwin <jhb@freebsd.org> wrote: > On Friday 13 October 2006 13:11, fulan Peng wrote: > > After make LINT;make cleandepend;make depend;make; make install, I > > really rebooted the machine serveral time. > > I read somewhere says FreeBSD would not change its kernel unless you > > manually copy the new kernel to somewhere. I think this is my problem. > > I already tried to copy the GENERIC to my hostname file. > > And I changed the ident to my hostname. I added > > options IPFIREWALL > > options IPFIREWALL_FORWARD > > options IPFIREWALL_VERBOSE. > > I did not pass the make. > > Then I leave only one line there > > options IPFIREWALL_FORWARD > > Still won't pass the make command. > > Please help me to get the new LINT kernel to work. > > You shouldn't be running a LINT kernel. If you aren't sure how to install > and boot a new kernel you probably should be running -stable (such as > RELENG_6) rather than -current. The specific breakage you are running into > has since been fixed, and it could be worked around by adding 'device atpic' > to your kernel config. > > -- > John Baldwin >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bf0f1bc90610131259v6a275bc8t84ec713f90158e7f>