Date: Thu, 8 Aug 2002 19:16:21 +0200 From: "Ridwaan" <ridwaanr@uunet.co.za> To: "Dave Raven" <dave@raven.za.net>, "Martin Husemann" <martin@duskware.de> Cc: <freebsd-isdn@freebsd.org> Subject: Re: USR card Message-ID: <000b01c23eff$5a1e1a20$0201a8c0@cincx.za.net> References: <014901c23567$dead5400$0200a8c0@lucy> <200207272008.g6RK8bEW004810@peedub.jennejohn.org> <20020807214514.A824@night-porter.duskware.de> <005401c23e51$99205020$0201a8c0@cincx.za.net> <000801c23efc$207def00$0400a8c0@lucy>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi I am getting the exact same thing now as well. The only problem at this time is that it is not detecting the carrier. As you will see below I have increased the set cd to 45 which is way too long as ISDN normally should connect in about three seconds. No ideas as yet but still not out of hope. Need to find how to force this Card to detect or ignore "carrier" and just do the dial thing. This reply is coming via the same card and ISDN line via windows box so that is not the "no carrier" issue. The fact that there are no error messages and the card is found and to all intents is willing to dial except for the "no carrier" is keeping my hopes alive to get this to work under FreeBSD. This is via user-land PPP. I have tried using Kernel PPP and got the previous errors but will try some more testing later. thanx for the input anyway. Aug 8 18:01:24 cyclopse ppp[253]: Phase: Using interface: tun0 Aug 8 18:01:24 cyclopse ppp[253]: Phase: deflink: Created in closed state Aug 8 18:01:24 cyclopse ppp[253]: Phase: PPP Started (interactive mode). Aug 8 18:01:27 cyclopse ppp[253]: Phase: bundle: Establish Aug 8 18:01:27 cyclopse ppp[253]: Phase: deflink: closed -> opening Aug 8 18:01:27 cyclopse ppp[253]: Phase: deflink: Connected! Aug 8 18:01:27 cyclopse ppp[253]: Phase: deflink: opening -> dial Aug 8 18:01:27 cyclopse ppp[253]: Phase: deflink: dial -> carrier Aug 8 18:01:57 cyclopse ppp[253]: Phase: deflink: /dev/i4brbch0: No carrier (increase ``set cd'' from 30 ?) Aug 8 18:01:57 cyclopse ppp[253]: Phase: deflink: Disconnected! Aug 8 18:01:57 cyclopse ppp[253]: Phase: deflink: carrier -> hangup Aug 8 18:01:57 cyclopse ppp[253]: Phase: deflink: Connect time: 30 secs: 0 octets in, 0 octets out Aug 8 18:01:57 cyclopse ppp[253]: Phase: deflink: : 0 packets in, 0 packets out Aug 8 18:01:57 cyclopse ppp[253]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu Aug 8 18:01:27 2002 Aug 8 18:01:57 cyclopse ppp[253]: Phase: deflink: hangup -> closed Aug 8 18:01:57 cyclopse ppp[253]: Phase: bundle: Dead Aug 8 18:03:18 cyclopse ppp[253]: Phase: PPP Terminated (normal). Aug 8 18:11:18 cyclopse ppp[287]: Phase: Using interface: tun0 Aug 8 18:11:18 cyclopse ppp[287]: Phase: deflink: Created in closed state Aug 8 18:11:18 cyclopse ppp[287]: Phase: PPP Started (interactive mode). Aug 8 18:11:27 cyclopse ppp[287]: Phase: bundle: Establish Aug 8 18:11:27 cyclopse ppp[287]: Phase: deflink: closed -> opening Aug 8 18:11:27 cyclopse ppp[287]: Phase: deflink: Connected! Aug 8 18:11:27 cyclopse ppp[287]: Phase: deflink: opening -> dial Aug 8 18:11:27 cyclopse ppp[287]: Phase: deflink: dial -> carrier Aug 8 18:12:13 cyclopse ppp[287]: Phase: deflink: /dev/i4brbch0: No carrier (increase ``set cd'' from 45 ?) Aug 8 18:12:13 cyclopse ppp[287]: Phase: deflink: Disconnected! Aug 8 18:12:13 cyclopse ppp[287]: Phase: deflink: carrier -> hangup Aug 8 18:12:13 cyclopse ppp[287]: Phase: deflink: Connect time: 46 secs: 0 octets in, 0 octets out Aug 8 18:12:13 cyclopse ppp[287]: Phase: deflink: : 0 packets in, 0 packets out Aug 8 18:12:13 cyclopse ppp[287]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu Aug 8 18:11:27 2002 Aug 8 18:12:13 cyclopse ppp[287]: Phase: deflink: hangup -> closed Aug 8 18:12:13 cyclopse ppp[287]: Phase: bundle: Dead ----- Original Message ----- From: "Dave Raven" <dave@raven.za.net> To: "Ridwaan" <ridwaanr@uunet.co.za>; "Martin Husemann" <martin@duskware.de> Sent: Thursday, August 08, 2002 6:53 PM Subject: Re: USR card > hmm. Hey guys, > I'm still looking into actually, but I've had no further luck > than you. I do however have a message in my ppp.log that > you dont, which might help: > > Aug 8 13:59:21 ciro_router ppp[7575]: Phase: 1: Enter pause (3) for > redialing. > Aug 8 13:59:24 ciro_router ppp[7575]: Phase: 1: Connected! > Aug 8 13:59:24 ciro_router ppp[7575]: Phase: 1: opening -> dial > Aug 8 13:59:24 ciro_router ppp[7575]: Phase: 1: dial -> carrier > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: 1: /dev/i4brbch0: No carrier > (increase ``set cd'' from 6 ?) > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: 1: Disconnected! > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: 1: carrier -> hangup > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: 1: Connect time: 6 secs: 0 > octets in, 0 octets out > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: 1: : 0 packets in, 0 packets > out > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: total 0 bytes/sec, peak 0 > bytes/sec on Thu Aug 8 13:59:24 2002 > > > > and so it loops. > but whats interesting is the: > Aug 8 13:59:30 ciro_router ppp[7575]: Phase: 1: /dev/i4brbch0: No carrier > (increase ``set cd'' from 6 ?) > which you dont seem to be getting. I know the line works fine, everything is > connected > properly - but this is timeing out (I have increased the cd, to easy a > hundred - just a longer delay). > > Any ideas? > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c23eff$5a1e1a20$0201a8c0>