Date: Tue, 24 Dec 2002 01:53:28 -0800 From: Jaye Mathisen <mrcpu@internetcds.com> To: freebsd-firewire@freebsd.org Subject: Problem recognizing second disk in 2 disk firewire enclosure. Message-ID: <20021224095328.GZ1284@backmaster.cdsnet.net>
next in thread | raw e-mail | index | archive | help
FreeBSD 4.7-stable, sup'd as of last night 12/23.
I got this enclosure that holds 2 3.5" IDE hard drives,
and hooks them up as individual drives to my firewire
connection.
Under windows XP, both drives are recognized just fine
as "SBP2" devices, I can format/copy/mangle at will.
However, under FreeBSD, only the 1st drive is
found (da0).
dmesg output is included:
opyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #5: Mon Dec 23 23:27:32 PST 2002
root@plugh.cdsnet.net:/usr/src/sys/compile/PLUGH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1002.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 125812736 (122864K bytes)
Preloaded elf kernel "kernel" at 0xc04a4000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fde10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5159 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 12 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 12 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <VIA VT82C686A> port 0xc000-0xc003,0xbc00-0xbc03,0xb800-0xb8ff irq 15 at device 7.5
on pci0
fwohci0: <Texas Instruments TSB12LV26> mem 0xe5800000-0xe5803fff,0xe5804000-0xe58047ff irq
11 at device 8.0 on pci0
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:20:e5:00:00:01:ff:e4
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
pcib2: <DEC 21052 PCI-PCI bridge> at device 9.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec 2940 SCSI adapter> port 0xc800-0xc8ff mem 0xe5806000-0xe5806fff irq 15 at d
evice 10.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
twe0: <3ware Storage Controller> port 0xcc00-0xcc0f mem 0xe5000000-0xe57fffff,0xe5805000-0
xe580500f irq 11 at device 12.0 on pci0
twe0: 8 ports, Firmware FE7X 1.04.00.024, BIOS BE7X 1.07.02.008
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xcffff,0xd0000-0xd07ff,0xd1000-0xd1f
ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
sbc0: <SoundBlaster Pro> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
pcm1: <SB DSP 3.02> on sbc0
pca0 at port 0x40 on isa0
firewire0: BUS reset
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 63->1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
twe0: command interrupt
IPsec: Initialized Security Association Processing.
Waiting 5 seconds for SCSI devices to settle
twed0: <RAID5, Normal> on twe0
twed0: 439846MB (900806400 sectors)
firewire0:Discover new S400 device ID:00048302ee003003
bus_explore done
Device SBP-II
sbp_post_explore: EUI:00048302ee003003 spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:14 EUI:00048302ee003003 node:0 speed:2 maxrec:5 new!
sbp0:0:0 'Oxford ' '911D' '000132'
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0100000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
de0: enabling Full Duplex 100baseTX port
Mounting root from ufs:/dev/twed0s1a
da0 at sbp0 bus 0 target 0 lun 0
da0: <Oxford 911D 0132> Fixed Simplified Direct Access SCSI-4 device
da0: 50.000MB/s transfers
da0: 114498MB (234493056 512 byte sectors: 255H 63S/T 14596C)
a "camcontrol rescan all" reveals nothing new being discovered.
I don't know what the internal fw/IDE thingie is inside, although I could probably take
it apart and find it.
Thanks for any assistance.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021224095328.GZ1284>