Date: Thu, 3 Oct 1996 16:26:06 -0500 (CDT) From: "Paul T. Root" <proot@horton.iaces.com> To: questions@freebsd.org Subject: Problems with Quantum 4gig drive Message-ID: <199610032126.QAA13524@horton.iaces.com>
next in thread | raw e-mail | index | archive | help
Hi, I've got a Compaq DeskPro 2000 (133MHz) machine, with 32 meg, an Adaptec 2940UW, a Seagate ST32550W 2 gig drive on sd0 and a Quantum XP34300W 4gig drive on sd1. My problem is the Quantum won't work. I did install it and things went fine for a couple of hours then. I get parity errors and the SCSI bus hangs up. I did disable the IDE on the motherboard of the Compaq, and without the Quantum drive it works fine. The Quantum is in the middle connector on the internal cable, the Seagate is on the end, there is nothing connected to the external connector. Could it be I need to set a jumper on the quantum? Termination? I didn't receive a book with the Quantum (I do have one for the Seagate). The drive came installed with an IDE drive, I pulled the IDE, and installed the Seagate as sd0 and jumpered the Quantum as sd1. That's the only changes to the drives. Any ideas? Thanks, Paul. Included is the messages, I truncated for brievity: Oct 3 13:15:49 newwww /kernel: FreeBSD 2.1.5-RELEASE #0: Thu Oct 3 08:55:34 CDT 1996 Oct 3 13:15:49 newwww /kernel: proot@newwww.iaces.com:/usr/src/sys/compile/WWW Oct 3 13:15:49 newwww /kernel: CPU: 133-MHz Pentium 735\90 or 815\100 (Pentium-class CPU) Oct 3 13:15:49 newwww /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping=12 Oct 3 13:15:49 newwww /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Oct 3 13:15:50 newwww /kernel: real memory = 33554432 (32768K bytes) Oct 3 13:15:50 newwww /kernel: Physical memory hole(s): Oct 3 13:15:50 newwww /kernel: avail memory = 30789632 (30068K bytes) Oct 3 13:15:50 newwww /kernel: Probing for devices on PCI bus 0: Oct 3 13:15:50 newwww /kernel: chip0 <Intel 82439> rev 1 on pci0:0 Oct 3 13:15:50 newwww /kernel: fxp0 <Intel EtherExpress Pro/100B Fast Ethernet> rev 1 int a irq 11 on pci0:2 Oct 3 13:15:50 newwww /kernel: fxp0: Ethernet address 00:a0:c9:08:1e:e1 Oct 3 13:15:50 newwww /kernel: ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:4 Oct 3 13:15:50 newwww /kernel: ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs Oct 3 13:15:50 newwww /kernel: ahc0 waiting for scsi devices to settle Oct 3 13:15:50 newwww /kernel: (ahc0:0:0): "SEAGATE ST32550W 0021" type 0 fixed SCSI 2 Oct 3 13:15:50 newwww /kernel: sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors) Oct 3 13:15:50 newwww /kernel: sd0(ahc0:0:0): with 3511 cyls, 11 heads, and an average 108 sectors/track Oct 3 13:15:50 newwww /kernel: (ahc0:1:0): "Quantum XP34300W L912" type 0 fixed SCSI 2 Oct 3 13:15:50 newwww /kernel: sd1(ahc0:1:0): Direct-Access 4101MB (8399520 512 byte sectors) Oct 3 13:15:50 newwww /kernel: sd1(ahc0:1:0): with 3907 cyls, 20 heads, and an average 107 sectors/track Oct 3 13:15:50 newwww /kernel: chip1 <Intel 82371 PCI-ISA bridge> rev 1 on pci0:7:0 Oct 3 13:15:50 newwww /kernel: chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1 Oct 3 13:15:50 newwww /kernel: vga0 <VGA-compatible display device> rev 0 on pci0:15 Oct 3 13:15:51 newwww /kernel: Probing for devices on the ISA bus: Oct 3 13:15:51 newwww /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Oct 3 13:15:51 newwww /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Oct 3 13:15:51 newwww /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa Oct 3 13:15:51 newwww /kernel: sio0: type 16550A Oct 3 13:15:51 newwww /kernel: sio1: disabled, not probed. Oct 3 13:15:51 newwww /kernel: sio2: disabled, not probed. Oct 3 13:15:51 newwww /kernel: sio3: disabled, not probed. Oct 3 13:15:51 newwww /kernel: lpt0 at 0x378-0x37f irq 7 on isa Oct 3 13:15:51 newwww /kernel: lpt0: Interrupt-driven port Oct 3 13:15:51 newwww /kernel: lp0: TCP/IP capable interface Oct 3 13:15:51 newwww /kernel: mse0: disabled, not probed. Oct 3 13:15:51 newwww /kernel: psm0 at 0x60-0x63 irq 12 on motherboard Oct 3 13:15:51 newwww /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Oct 3 13:15:51 newwww /kernel: fdc0: NEC 72065B Oct 3 13:15:51 newwww /kernel: fd0: 1.44MB 3.5in Oct 3 13:15:51 newwww /kernel: npx0 on motherboard Oct 3 13:15:51 newwww /kernel: npx0: INT 16 interface . . . Oct 3 13:54:19 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase. Oct 3 13:54:32 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(0) Oct 3 13:54:32 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 13:54:32 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer Oct 3 13:54:32 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 13:54:32 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 4 SCBs aborted Oct 3 13:54:32 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 Oct 3 13:54:32 newwww /kernel: , retries:3 Oct 3 13:54:32 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 Oct 3 13:54:32 newwww /kernel: sd0(ahc0:0:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 Oct 3 13:54:32 newwww /kernel: , retries:3 Oct 3 14:11:21 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase. Oct 3 14:11:33 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(0) Oct 3 14:11:33 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:11:33 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer Oct 3 14:11:33 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:11:33 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 3 SCBs aborted Oct 3 14:11:33 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 Oct 3 14:11:33 newwww /kernel: , retries:3 Oct 3 14:11:33 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 Oct 3 14:11:33 newwww /kernel: sd0(ahc0:0:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 Oct 3 14:11:33 newwww /kernel: , retries:3 Oct 3 14:11:51 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase. Oct 3 14:12:03 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(3) Oct 3 14:12:03 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:12:03 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer Oct 3 14:12:03 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:12:03 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 3 SCBs aborted Oct 3 14:12:03 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 Oct 3 14:12:03 newwww /kernel: , retries:3 Oct 3 14:12:03 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 Oct 3 14:12:03 newwww /kernel: sd0(ahc0:0:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 Oct 3 14:12:04 newwww /kernel: , retries:3 Oct 3 14:13:51 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase. Oct 3 14:14:04 newwww last message repeated 3 times Oct 3 14:14:04 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(0) Oct 3 14:14:04 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:14:04 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer Oct 3 14:14:04 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:14:04 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 7 SCBs aborted Oct 3 14:14:04 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 Oct 3 14:14:04 newwww /kernel: , retries:3 Oct 3 14:14:04 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 Oct 3 14:14:04 newwww /kernel: sd0(ahc0:0:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 Oct 3 14:14:04 newwww /kernel: , retries:3 Oct 3 14:15:21 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase. Oct 3 14:15:34 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(1) Oct 3 14:15:34 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:15:34 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer Oct 3 14:15:34 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6 Oct 3 14:15:34 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 4 SCBs aborted Oct 3 14:15:34 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 Oct 3 14:15:34 newwww /kernel: , retries:3 Oct 3 14:15:34 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 Oct 3 14:15:34 newwww /kernel: sd0(ahc0:0:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 Oct 3 14:15:34 newwww /kernel: , retries:3 -- Paul T. Root E/Mail: proot@iaces.com 200 S. 5th St. Suite 1100 PAG: +1 (800) SKY-PAGE PIN: 537-7370 Minneapolis, MN 55402 WRK: +1 (612) 663-1979 NIC: PTR FAX: +1 (612) 663-8030
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199610032126.QAA13524>