Date: Sun, 18 Mar 2007 18:44:40 +0800 From: David Schulz <mailinglists@tca-cable-connector.com> To: freebsd-acpi@freebsd.org Subject: Compaq Presario V3000 Message-ID: <CC0C5BEA-DA7A-46BF-BE34-21B253E3B81D@tca-cable-connector.com>
next in thread | raw e-mail | index | archive | help
--Apple-Mail-4-486468196
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
delsp=yes;
format=flowed
Hello all,
i have a Compaq Presario V3000. After installing FreeBSD i am getting
these type of Messages to my Log.
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\
\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\
\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60),
AE_NO_HARDWARE_RESPONSE
I have attached my full dmesg output in dmesg.txt.
Is there any way of resolving this? Basically, these Messages
continue to appear at maybe 30 second interval.
Thanks a lot,
David
--Apple-Mail-4-486468196
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
x-unix-mode=0644;
name=dmesg.txt
Content-Disposition: attachment;
filename=dmesg.txt
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2050 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>
AMD Features=0x100000<NX>
Cores per package: 2
real memory = 526909440 (502 MB)
avail memory = 506023936 (482 MB)
ACPI APIC Table: <HP 30B2 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HP 30B2> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib3
pci5: <network> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd4544000-0xd45443ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib4
fxp0: <Intel Pro/100 VE Network Connection> port 0x3000-0x303f mem 0xd4100000-0xd4100fff irq 20 at device 8.0 on pci8
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:16:d3:1b:e4:1b
fwohci0: <1394 Open Host Controller Interface> mem 0xd4101000-0xd41017ff irq 16 at device 9.0 on pci8
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 07:e4:0a:00:a7:20:50:02
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 06:e4:0a:20:50:02
fwe0: Ethernet address: 06:e4:0a:20:50:02
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci8: <base peripheral> at device 9.1 (no driver attached)
pci8: <base peripheral> at device 9.2 (no driver attached)
pci8: <base peripheral> at device 9.3 (no driver attached)
pci8: <base peripheral> at device 9.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7M SATA300 controller> port 0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf mem 0xd4544400-0xd45447ff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> at ata0-master PIO4
ad4: 76319MB <FUJITSU MHV2080BH PL 892C> at ata2-master SATA150
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE
fxp0: link state changed to UP
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE
--Apple-Mail-4-486468196--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CC0C5BEA-DA7A-46BF-BE34-21B253E3B81D>