Date: Sun, 19 Nov 2000 13:26:46 -0600 (CST) From: Mike Meyer <mwm@mired.org> To: Bill Bumgarner <bbum@codefab.com> Cc: questions@freebsd.org Subject: Re: port problems on clean install Message-ID: <14872.10614.57702.93024@guru.mired.org> In-Reply-To: <Pine.GSO.4.10.10011191241510.22495-100000@bjork.codefab.com> References: <14871.44667.137101.473405@guru.mired.org> <Pine.GSO.4.10.10011191241510.22495-100000@bjork.codefab.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Bill Bumgarner <bbum@codefab.com> types:
> Yes-- I found how to set the timezone, but there doesn't seem to be anything
> associated with setting daylight savings time or not. It also seems that the
> system doesn't include an NTP daemon configuration, by default?
The time zone and the current date and time are enough to determine
whether or not DST is active. Any system that asks you to set DST has
problems.
Yes, there's no ntp daemon configuration. On the other hand, the
default values for everything but the servers to query for the current
time works, and you should get the server information from your
ISP.
> It seems that a "make install" on openssh (the only port that built
> successfully) causes the system to try to run the sshd daemon twice upon boot.
> I haven't tracked that down yet, but will do so shortly.
ssh (and sshd) is part of the base system. You're running both
versions of sshd, one from /etc/rc and one from
/usr/local/etc/rc.d/sshd.sh (or some such).
> Enclosed is the output of a failed build. I figured out how to use cvsup to
> bring down a -STABLE of ports-all and will retry from that.
Unfortunately, the log doesn't provide more useful information. If
you haven't, you might do a "make clean" and try rebuilding
things. Other than that, it might well be the clock - but the log file
doesn't tell you which file it's complaining about. An ls -l on a
built file and the output of "date" might be illuminating, but I'd
guess your diagnosis of the clock being wrong or misconfigured is
right.
<mike
> thanks!
> b.bum
>
> On Sun, 19 Nov 2000, Mike Meyer wrote:
>
> > Bill Bumgarner <bbum@codefab.com> types:
> > > Am I correct in assuming that one should be abel to cd into any of the
> > > ports in /usr/ports/ after a clean install from a 4.11 cd, type "make
> > > install" and it should "just work"?
> >
> > And it usually does.
> >
> > > It definitely isn't on my system. When checking to see whether the
> > > build environment is sane, it complains that "newly created file is
> > > older than system file".
> >
> > That's not enough information. How about the last bit of the output of
> > the make command? Or all of it, if it isn't very long.
> >
> > > The date/time on the system is correct-- though, looking more closely,
> > > it appears that it is not taking into account daylight savings time?
> > > Actually, there doesn't appear to be any option anywhere for either
> > > setting daylight savings time OR setting the computers clock during
> > > setup. This *really* should be a part of the setup as it can grossly
> > > impact a system's usability if the clock is wrong.
> >
> > It is part of the system installation process - you're just not forced
> > to do it. Run /stand/sysinstall, hit the c key, enter, then down arrow
> > until you get to time zone and hit enter again. That will walk you
> > through setting the time zone.
> >
> > <mike
> >
> >
>
> ===> Extracting for dog-1.5
> >> Checksum OK for dog-1.5.tar.gz.
> ===> dog-1.5 depends on executable: gmake - not found
> ===> Verifying install for gmake in /usr/ports/devel/gmake
> ===> Extracting for gmake-3.79.1
> >> Checksum OK for make-3.79.1.tar.gz.
> ===> gmake-3.79.1 depends on shared library: intl.1 - not found
> ===> Verifying install for intl.1 in /usr/ports/devel/gettext
> ===> Extracting for gettext-0.10.35
> >> Checksum OK for gettext-0.10.35.tar.gz.
> ===> gettext-0.10.35 depends on executable: libtool - not found
> ===> Verifying install for libtool in /usr/ports/devel/libtool
> ===> Configuring for libtool-1.3.4
> loading cache ./config.cache
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... (cached) yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... (cached) cc
> checking whether the C compiler (cc -O -pipe ) works... yes
> checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no
> checking whether we are using GNU C... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for ranlib... (cached) ranlib
> checking host system type... i386--freebsd4.1.1
> checking build system type... i386--freebsd4.1.1
> checking for ld used by GCC... (cached) /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... (cached) yes
> checking for BSD-compatible nm... (cached) /usr/bin/nm -B
> checking whether ln -s works... (cached) yes
> checking for mawk... (cached) awk
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating doc/Makefile
> creating tests/Makefile
> configuring in libltdl
> running /bin/sh ./configure --disable-ltdl-install --prefix=/usr/local i386--freebsd4.1.1 --cache-file=.././config.cache --srcdir=.
> loading cache .././config.cache
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... configure: error: newly created file is older than distributed files!
> Check your system clock
> configure: error: ./configure failed for libltdl
> ===> Script "configure" failed: here are the contents of "config.log"
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> configure:569: checking for a BSD compatible install
> configure:622: checking whether build environment is sane
> configure:679: checking whether make sets ${MAKE}
> configure:725: checking for working aclocal
> configure:738: checking for working autoconf
> configure:751: checking for working automake
> configure:764: checking for working autoheader
> configure:777: checking for working makeinfo
> configure:818: checking for gcc
> configure:931: checking whether the C compiler (cc -O -pipe ) works
> configure:947: cc -o conftest -O -pipe conftest.c 1>&5
> configure:973: checking whether the C compiler (cc -O -pipe ) is a cross-compiler
> configure:978: checking whether we are using GNU C
> configure:1006: checking whether cc accepts -g
> configure:1040: checking for ranlib
> configure:1074: checking host system type
> configure:1095: checking build system type
> configure:1124: checking for ld used by GCC
> configure:1186: checking if the linker (/usr/libexec/elf/ld) is GNU ld
> configure:1203: checking for BSD-compatible nm
> configure:1240: checking whether ln -s works
> configure:1266: checking for mawk
> (end of "config.log")
> *** Error code 1
>
> Stop in /usr/ports/devel/libtool.
> *** Error code 1
>
> Stop in /usr/ports/devel/libtool.
> *** Error code 1
>
> Stop in /usr/ports/devel/libtool.
> *** Error code 1
>
> Stop in /usr/ports/devel/libtool.
> *** Error code 1
>
> Stop in /usr/ports/devel/libtool.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gettext.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/devel/gmake.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
> *** Error code 1
>
> Stop in /usr/ports/misc/dog.
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14872.10614.57702.93024>