Date: Mon, 27 Nov 2000 20:10:27 +0100 From: Johannes Hofmann <Johannes.Hofmann@gmx.de> To: freebsd-questions@freebsd.org Subject: Suspend/resume/suspend/hang Message-ID: <20001127201027.A8035@blob.holzstrasse.com>
next in thread | raw e-mail | index | archive | help
Hi, Since I upgraded my Laptop (Acer Extensa 367T) from 4.1-stable to 4.2-stable, my laptop locks up hard after the second suspend. This was not the case in 4.1-stable. I tried to compile the kernel with the apm.c file from 4.1-stable, but the problem was still there with the modified kernel. The problem looks very similar to http://www.FreeBSD.org/cgi/query-pr.cgi?pr=20375 Do you have any further information on the problem? Thanks in advance, Johannes Hofmann Output of dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-STABLE #12: Sun Nov 26 23:02:40 CET 2000 root@blob.holzstrasse.com:/mnt/usr/src/sys/compile/CUSTOM Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (quarter-micron) (199.96-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 50331648 (49152K bytes) config> enable apm0 avail memory = 45969408 (44892K bytes) Preloaded elf kernel "kernel" at 0xc0317000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031709c. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 chip1: <PCI to CardBus bridge (vendor=1217 device=6832)> at device 5.0 on pci0 chip2: <PCI to CardBus bridge (vendor=1217 device=6832)> at device 5.1 on pci0 pci0: <NeoMagic model 0083 VGA-compatible display device> at 6.0 irq 9 atapci0: <AcerLabs Aladdin ATA33 controller> port 0xf000-0xf00f irq 15 at device 11.0 on pci0 atapci0: Busmastering DMA not supported ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip3: <AcerLabs M15x3 Power Management Unit> port 0xf140-0xf15f,0xf100-0xf13f at device 12.0 on pci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port unknown: <PNP0000> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0f13> can't assign resources unknown: <PNP0400> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0700> can't assign resources pccard: card inserted, slot 1 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 2061MB <HITACHI_DK226A-21U> [4188/16/63] at ata0-master BIOSPIO acd0: CDROM <CD-220EA> at ata1-master using BIOSPIO Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted ed1 at port 0x240-0x25f irq 3 slot 1 on pccard1 ed1: address 00:00:e8:19:ce:f5, type NE2000 (16 bit) ed1: detached pccard: card removed, slot 1 stray irq 3 pccard: card inserted, slot 1 ed1 at port 0x240-0x25f irq 3 slot 1 on pccard1 ed1: address 00:00:e8:19:ce:f5, type NE2000 (16 bit) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001127201027.A8035>