From owner-freebsd-hackers Thu Nov 20 23:06:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id XAA18769 for hackers-outgoing; Thu, 20 Nov 1997 23:06:13 -0800 (PST) (envelope-from owner-freebsd-hackers) Received: from trojanhorse.ml.org (mdean.vip.best.com [206.86.94.101]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id XAA18759 for ; Thu, 20 Nov 1997 23:06:08 -0800 (PST) (envelope-from jamil@trojanhorse.ml.org) Received: from localhost (jamil@localhost) by trojanhorse.ml.org (8.8.8/8.8.5) with SMTP id XAA01060 for ; Thu, 20 Nov 1997 23:05:57 -0800 (PST) Date: Thu, 20 Nov 1997 23:05:57 -0800 (PST) From: "Jamil J. Weatherbee" To: hackers@freebsd.org Subject: SCSI Errors & CCD Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I purchased two 4.3 gig IBM External Scsi drives and want to use ccd to make them mirrors of each other. I would like to install from my 2.2.5 cds onto these drives. Is there a way to set it up to install onto mirrored drives at install time or can I do this later? I want to be able to boot off of these ccd drives. What does the following mean: It appeared when I was trying to install 2.2.5 on my external IBM 4.3gig Ultra SCSI. I am using a 2940 ultra, and are properly active terminated externally. The adapter is set to use ultra mode(20mhz?) on this device which is id0. This is the only device external, and the only device period (3' cable). sd0(ahc0:0:0): parity error during data-in phase sd0(ahc0:0:0): ABORTED COMMAND sd0(ahc0:0:0): Initiator Detected error message received, retries: 2 sometimes retries were 1-4 here is my dmesg: Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.5-STABLE #0: Thu Nov 20 20:52:17 PST 1997 root@shellx.acroal.com:/usr/src/sys/compile/SHELLX CPU: Pentium Pro (179.63-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xfbff,MTRR,PGE,MCA,CMOV> real memory = 67108864 (65536K bytes) avail memory = 62496768 (61032K bytes) DEVFS: ready for devices Probing for devices on PCI bus 0: chip0 rev 2 on pci0:0 chip1 rev 1 on pci0:7:0 chip2 rev 0 on pci0:7:1 vga0 rev 2 int a irq 11 on pci0:15 ahc0 rev 1 int a irq 9 on pci0:16 ahc0: aic7860 Single Channel, SCSI Id=7, 3 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "IBM DCAS-34330 S60B" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 4134MB (8467200 512 byte sectors) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 on isa ed0: address 00:40:05:3c:8e:0f, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 3815MB (7814016 sectors), 7752 cyls, 16 heads, 63 S/T, 512 B/S wdc1: unit 1 (atapi): , removable, dma, iordis wcd0: 689Kb/sec, 112Kb cache, audio play, 127 volume levels, ejectable tray wcd0: 120mm data disc loaded, unlocked npx0 flags 0x1 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa sb0: sbxvi0 at 0x0 drq 5 on isa sbxvi0: sbmidi0 at 0x330 on isa DEVFS: ready to run IP packet filtering initialized, divert enabled, logging disabled