From owner-freebsd-hardware Fri Feb 9 19:27:58 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mx.databus.com (p101-44.acedsl.com [160.79.101.44]) by hub.freebsd.org (Postfix) with ESMTP id 1F09B37B401 for ; Fri, 9 Feb 2001 19:27:37 -0800 (PST) Received: (from barney@localhost) by mx.databus.com (8.11.1/8.11.1) id f1A3RZG54926 for hardware@freebsd.org; Fri, 9 Feb 2001 22:27:35 -0500 (EST) (envelope-from barney) Date: Fri, 9 Feb 2001 22:27:35 -0500 From: Barney Wolff To: hardware@freebsd.org Subject: Supermicro PIIIDRE Message-ID: <20010209222735.A54850@mx.databus.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm running 4.2-stable on a Supermicro PIIIDRE with good success. -j4 buildworld in 28 min with 2 1GHz cpu's and 2 10,000 rpm scsi drives. Does anyone know if there is support for the onboard AC'97 sound in the Intel 82801AA? I got from somewhere that it has a CS4299 codec, which does not seem to be among the chips that csa.c supports. (Devices pcm and csa are in the kernel config.) Also, I'm running healthd through the smbus, but get only a chipset temp, not the two cpu temps. Does anyone have a magic healthd.conf that works with this motherboard? If not I guess I'll plow through the Winbond datasheet and report results. Finally, can anyone point me to a reference for the unknown PNP devices? I have the BIOS set for "plug&play os" - is that right? There are no ISA slots, and only a 39160 in the PCI slots, with an ATI Radeon in the AGP. Thanks, Barney Wolff dmesg.boot: avail memory = 257232896 (251204K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 IOAPIC #1 intpin 0 -> irq 2 IOAPIC #1 intpin 1 -> irq 18 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170020, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x00178020, at 0xff6fd000 Preloaded elf kernel "kernel" at 0xc03ee000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ee09c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci4: on pcib1 pci4: at 0.0 irq 16 pcib2: at device 2.0 on pci0 pci2: on pcib2 pcib3: at device 31.0 on pci2 pci3: on pcib3 pci3: (vendor=0x8086, dev=0x1161) at 0.0 ahc0: port 0xb400-0xb4ff mem 0xff6fe000-0x ff6fefff irq 2 at device 2.0 on pci3 aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: port 0xb800-0xb8ff mem 0xff6ff000-0x ff6fffff irq 18 at device 2.1 on pci3 aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs pcib4: at device 30.0 on pci0 pci1: on pcib4 fxp0: port 0xaf00-0xaf3f mem 0xff400000-0xff4f ffff,0xff5fe000-0xff5fefff irq 16 at device 8.0 on pci1 fxp0: Ethernet address 00:30:48:10:70:d5 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xef80-0xef9f irq 19 at device 31.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichsmb0: port 0xefa0-0xefaf irq 17 at dev ice 31.3 on pci0 smbus0: on ichsmb0 smb0: on smbus0 chip1: port 0xef00-0xef3f,0xe800-0x e8ff irq 17 at device 31.5 on pci0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: on ppbus0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default IPsec: Initialized Security Association Processing. IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled SMP: AP CPU #1 Launched! acd0: CDROM at ata0-master using PIO4 acd1: CD-RW at ata0-slave using UDMA33 Waiting 10 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s2a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enable d da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enable d da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message