Date: Wed, 12 Aug 1998 09:53:47 -0500 (CDT) From: "Andrew J. Doane" <adoane@ais.net> To: freebsd-scsi@FreeBSD.ORG Subject: Problems w/CAM (aha and bt issues) Message-ID: <199808121453.JAA00773@eagle.ais.net>
next in thread | raw e-mail | index | archive | help
Hello all, I am currently running: FreeBSD <hostname excluded> 3.0CAM-19980712-SNAP FreeBSD 3.0CAM-19980712-SNAP #1: Tue Aug 11 23:55:17 CDT 1998 I attempted to apply to 0716 patch but it appears it really was already installed with the 0712 snapshot- cam_ccb.h:#define CAM_VERSION 0x4C /* Hex value for current version */ is the same for both 0712 and 0716 (If this isn't a good way of determining this, please let me know). The patch fails and wants to assume -R, so it really looks like it is already 0716. This is a dual PII-400 box with 4 scsi hosts: 1. Buslogic 958D (ultra/wide/diff) 2. Buslogic 946C (narrow) 3. Qty (2) 2940UW's My problem with the 958D is: da10 at bt1 bus 0 target 1 lun 0 da10: <MICROP 3391WD\\000\\000\\000\\000\\000\\000\\000\\000\\000\\000 P429> Fix ed Direct Access SCSI2 device da10: 3.300MB/s transfers, Tagged Queueing Enabled da10: 8681MB (17780058 512 byte sectors: 255H 63S/T 1106C) da15 at bt1 bus 0 target 8 lun 0 da15: <QUANTUM XP39100WD LXY4> Fixed Direct Access SCSI2 device da15: 3.300MB/s transfers, Tagged Queueing Enabled da15: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C) da14 at bt1 bus 0 target 5 lun 0 da14: <QUANTUM XP39100WD LXY4> Fixed Direct Access SCSI2 device da14: 3.300MB/s transfers, Tagged Queueing Enabled da14: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C) da13 at bt1 bus 0 target 4 lun 0 da13: <MICROP 3391WD\\000\\000\\000\\000\\000\\000\\000\\000\\000\\000 P429> Fix ed Direct Access SCSI2 device da13: 3.300MB/s transfers, Tagged Queueing Enabled da13: 8681MB (17780058 512 byte sectors: 255H 63S/T 1106C) da12 at bt1 bus 0 target 3 lun 0 da12: <QUANTUM DS20I \\251 Quantum LYC3> Fixed Direct Access SCSI2 device da12: 3.300MB/s transfers, Tagged Queueing Enabled da12: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C) da11 at bt1 bus 0 target 2 lun 0 da11: <QUANTUM XP39100WD LXY4> Fixed Direct Access SCSI2 device da11: 3.300MB/s transfers, Tagged Queueing Enabled da11: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C) All disks are recognized (which is new from the standard scsi drivers which don't realize the 958D is a wide controller), but they are syncing at 3.300MB/s ??? These disks should be able to do 40MB/s (ultra wide diff). The second issue is on ahc - I don't have specifics quite yet but I'm getting hangs on this disk which cause the entire system to hang. The next time it hangs I'll capture some console messages. From memory is was something like "Timed out due to another timeout" and referenced aha:da1. I had a similiar issue under linux and was forced to disable tagged queing on my microp 4743SS drives. I'm not quite sure how to do that under fbsd. da1 at ahc0 bus 0 target 2 lun 0 da1: <MICROP 4743SS S162> Fixed Direct Access SCSI2 device da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit) da1: 4100MB (8398656 512 byte sectors: 255H 63S/T 522C) Any insight would be appreciated :-) /ajd/ -- _/_/ _/ _/_/_/_/ Andrew J. Doane _/ _/ _/ _/ VP, Access Div; Director, Network Ops _/_/_/_/ _/ _/_/_/_/ American Information Systems, Inc. _/ _/ _/ _/ Mail:adoane@ais.net, http://www.ais.net _/ _/ _/ _/_/_/_/ (312) 255-8500 Voice, (312) 255-8501 Fax For my PGP public key, email me with the subject "pgp request" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199808121453.JAA00773>