Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 Jun 2013 11:14:30 +0100 (BST)
From:      Anton Shterenlikht <mexas@bris.ac.uk>
To:        freebsd-sparc64@freebsd.org, freebsd-x11@freebsd.org
Subject:   sparc64 machfb: (EE) Unable to map mmio aperture. Invalid argument (22)
Message-ID:  <201306131014.r5DAEUmh030099@mech-cluster241.men.bris.ac.uk>

next in thread | raw e-mail | index | archive | help
I've just updated my Sun Blade 1500 silver
to 10.0-CURRENT #11 r251648. The graphics broke.
I get:

(EE) Unable to map mmio aperture. Invalid argument (22)

from X -configure

# dmesg|grep mach
machfb0: <ATI Rage XL> port 0xb00-0xbff mem 0x3000000-0x3ffffff,0x102000-0x102ff
f at device 2.0 on pci0
machfb0: console
machfb0: 16 MB aperture at 0xfddcc000 not swapped
machfb0: 8188 KB SGRAM 114.992 MHz, maximum RAMDAC clock 230 MHz, DSP
machfb0: resolution 1280x1024 at 8 bpp
#

# pkg info -xo mach6
xf86-video-mach64-6.9.3: x11-drivers/xf86-video-mach64
#

# cat /var/log/Xorg.0.log

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 10.0-CURRENT sparc64
Current Operating System: FreeBSD mech-anton240.men.bris.ac.uk 10.0-CURRENT Free
BSD 10.0-CURRENT #11 r251648: Thu Jun 13 10:20:15 BST 2013     root@mech-anton24
0.men.bris.ac.uk:/usr/obj/usr/src/sys/QOF sparc64
Build Date: 03 June 2013  03:14:51PM

Current version of pixman: 0.28.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 13 11:07:01 2013
(II) Loader magic: 0x3c5768
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 8589945424.11)
(--) using VT number 11

(--) PCI: (0:0:6:0) 10b9:7101:0000:0000 ULi Electronics Inc. M7101 Power Managem
ent Controller [PMU] rev 0
(--) PCI: (0:0:2:0) 1002:4752:0000:0000 Advanced Micro Devices, Inc. [AMD/ATI] R
age XL PCI rev 39, Mem @ 0x03000000/16777216, 0x00102000/4096, I/O @ 0x00000b00/
256, BIOS @ 0x????????/65536
List of video drivers:
        mach64
(II) LoadModule: "mach64"
(II) Loading /usr/local/lib/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 6.9.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) MACH64: Driver for ATI Mach64 chipsets
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/OTF,
        /usr/local/lib/X11/fonts/Type1/,
        /usr/local/lib/X11/fonts/100dpi/,
        /usr/local/lib/X11/fonts/75dpi/,
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/OTF,
        /usr/local/lib/X11/fonts/Type1/,
        /usr/local/lib/X11/fonts/100dpi/,
        /usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(EE) Unable to map mmio aperture. Invalid argument (22)
(WW) MACH64: Mach64 in slot 0:2:0 could not be detected!


Xorg detected your mouse at device /dev/sysmouse.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'


Maybe I need to rebuild some ports?

Please advise

Thanks

Anton




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201306131014.r5DAEUmh030099>