Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 26 Oct 1996 12:47:21 +0200 (SAT)
From:      rv@groa.uct.ac.za (Russell Vincent)
To:        current@freebsd.org
Subject:   Oct 22 panic
Message-ID:  <m0vH6Gw-0004vzC@groa.uct.ac.za>

next in thread | raw e-mail | index | archive | help
I am not sure if this will be of any use to anyone. An Oct 22 -current
kernel panic'ed with the following data. I did an Adaptec verify of
the 3 disks involved in the ccd config of that filesystem and they
all turned up clean.

The panic occured during the 'fastrm' phase of the news expire and
machine is a busy news and cache server.

There have been previous panics on this machine, but I didn't have
the kernel set to dump, so haven't been able get any reports (nothing
occured in syslog from those panics).

I have also been getting the following:

Oct 24 18:02:06 disa /kernel: NMI ISA 30, EISA 6
Oct 22 16:46:09 disa /kernel: NMI ISA 30, EISA 6
Oct 21 14:12:08 disa /kernel: NMI ISA 20, EISA 6
Oct 17 02:10:25 disa /kernel: NMI ISA 30, EISA 6

which may be due to a problematic graphics card - due to be replaced
shortly. I have 2 other identical machines (but not as busy) which
haven't panic'ed yet.

 -Russell

---------------------------------------------
Just before the panic, the following in /var/log/messages:

Oct 26 00:25:39 disa /kernel: , ino 591449
Oct 26 00:25:39 disa /kernel: pid 9603 (fastrm), uid 100 on /spool: bad block
Oct 26 00:25:39 disa /kernel: bad block 1393189998, ino 591449
Oct 26 00:25:39 disa /kernel: pid 9603 (fastrm), uid 100 on /spool: bad block
Oct 26 00:25:39 disa /kernel: bad block 1680765042, ino 591449
..... some deleted .....
Oct 26 00:25:41 disa /kernel: pid 9603 (fastrm), uid 100 on /spool: bad block
Oct 26 00:25:41 disa /kernel: bad block 1853173364, ino 591449
Oct 26 00:25:41 disa /kernel: pid 9603 (fastrm), uid 100 on /spool: bad block
Oct 26 00:25:41 disa /kernel: bad block 1668620346, ino 591449
Oct 26 00:25:41 disa /kernel: pid 9603 (fastrm), uid 100 on /spool: bad block
Oct 26 00:25:41 disa /kernel: bad block 1752457552, ino 591449
Oct 26 00:25:41 disa /kernel: pid 9603 (fastrm), uid 100 on /spool: bad block

---------------------------------------------
disa:/var/crash>ls -l
total 263297
-rw-r--r--  1 root  wheel          2 Oct 26 00:38 bounds
-rw-r--r--  1 root  wheel    1026899 Oct 26 00:40 kernel.0
-rw-r--r--  1 root  wheel  268435456 Oct 26 00:40 vmcore.0
disa:/var/crash>gdb -k kernel.0 vmcore.0
GDB is free software and you are welcome to distribute copies of it
 under certain conditions; type "show copying" to see the conditions.
There is absolutely no warranty for GDB; type "show warranty" for details.
GDB 4.13 (i386-unknown-freebsd), 
Copyright 1994 Free Software Foundation, Inc...(no debugging symbols found)...
IdlePTD 1f2000
current pcb at 1d93b0
panic: blkfree: freeing free frag
#0  0xf010e6a3 in boot ()
(kgdb) where
#0  0xf010e6a3 in boot ()
#1  0xf010e962 in panic ()
#2  0xf018e900 in ffs_blkfree ()
#3  0xf0190653 in ffs_truncate ()
#4  0xf0193fd9 in ufs_inactive ()
#5  0xf012d6a3 in vrele ()
#6  0xf012d597 in vput ()
#7  0xf019740c in ufs_remove ()
#8  0xf012f809 in unlink ()
#9  0xf01b1457 in syscall ()
#10 0xf01a9345 in Xsyscall ()
#11 0x22de in ?? ()
#12 0x2723 in ?? ()
#13 0x1095 in ?? ()

---------------------------------------------
dmesg output:

FreeBSD 2.2-CURRENT #0: Tue Oct 22 16:40:27 SAT 1996
    root@disa.uni.net.za:/usr/src/sys/compile/UNINET
Calibrating clock(s) relative to mc146818A clock...
i586 clock: 132623253 Hz, i8254 clock: 1193109 Hz
CPU: Pentium (131.30-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
  Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory  = 268435456 (262144K bytes)
avail memory = 261472256 (255344K bytes)
eisa0: <ASU5201 (System Board)>
Probing for devices on the EISA bus
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 1 on pci0:0
chip1 <Intel 82375EB PCI-EISA bridge> rev 5 on pci0:7:0
de0 <Digital DC21041 Ethernet> rev 17 int a irq 9 on pci0:9
de0: DC21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:35:5e:d6
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 12 on pci0:10
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
(ahc0:0:0): "Quantum XP32150W L912" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2050MB (4199760 512 byte sectors)
sd0(ahc0:0:0): with 3907 cyls, 10 heads, and an average 107 sectors/track
(ahc0:1:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 4101MB (8399520 512 byte sectors)
sd1(ahc0:1:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
(ahc0:2:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
sd2(ahc0:2:0): Direct-Access 4101MB (8399520 512 byte sectors)
sd2(ahc0:2:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
ahc1 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:11
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
(ahc1:0:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
sd3(ahc1:0:0): Direct-Access 4101MB (8399520 512 byte sectors)
sd3(ahc1:0:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
(ahc1:1:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
sd4(ahc1:1:0): Direct-Access 4101MB (8399520 512 byte sectors)
sd4(ahc1:1:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
ahc2 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12
ahc2: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
(ahc2:0:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
sd5(ahc2:0:0): Direct-Access 4101MB (8399520 512 byte sectors)
sd5(ahc2:0:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
(ahc2:1:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
sd6(ahc2:1:0): Direct-Access 4101MB (8399520 512 byte sectors)
sd6(ahc2:1:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
pci0:13:    CMD, device=0x0646, class=storage (ide) int a irq 14 [no driver assigned]
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
ccd0-3: Concatenated disk drivers
de0: enabling BNC port

---------------------------------------------
/etc/ccd.conf:

ccd0            16      none    /dev/sd2e /dev/sd4e /dev/sd6e

---------------------------------------------
/etc/fstab:

/dev/sd0s1b                     none            swap    sw 0 0
/dev/sd0a                       /               ufs     rw 1 1
/dev/sd0s1e                     /var            ufs     rw 1 1
/dev/sd0s1f                     /usr            ufs     rw 1 1
proc                            /proc           procfs  rw 0 0
/dev/sd1e                       /data           ufs     rw,nosuid 1 2
/dev/sd3e                       /cache/a        ufs     rw,nosuid 1 2
/dev/sd5e                       /cache/b        ufs     rw,nosuid 1 2
/dev/ccd0c                      /spool          ufs     rw,nosuid 1 2




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0vH6Gw-0004vzC>