Date: Tue, 5 Aug 1997 16:42:55 -0400 (EDT) From: "John W. DeBoskey" <jwd@unx.sas.com> To: freebsd-smp@freebsd.org Cc: jwd@unx.sas.com (John W. DeBoskey) Subject: Boot failure - 3.0-970731-SNAP Message-ID: <199708052042.AA16914@iluvatar.unx.sas.com>
next in thread | raw e-mail | index | archive | help
Hi, I've just installed 3.0-970731-SNAP on a Dell PowerEdge 6100/200 server. This is a 4-way PPro machine. After I've built an SMP kernel, when I boot it, it freezes after printing out the following info about memory: real memory = 67108864 (65536K bytes) avail memory = 63619072 (62128K bytes) The GENERIC kernel boots up just fine. (it's been about 4 months since I last had a SMP kernel running on this machine). The following is the output of 'mptable -dmesg' from the GENERIC kernel. Note that some of the dmesg info is lost due to the number of probe msgs being printed out for the PCI bus. Is there an easy way to expand the buffer space used by dmesg? (or get rid of the msg) Any hints on where to go look are greatly appreciated. Thanks for any info, John =============================================================================== MPTable, version 2.0.13 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f75a0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x6c mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f75b0 signature: 'PCMP' base table length: 292 version: 1.4 checksum: 0xe3 OEM ID: 'INTEL ' Product ID: 'ALDER ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 25 local APIC address: 0xfec08000 extended table length: 240 extended table checksum: 87 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 1 9 0xfbff 4 0x11 AP, usable 6 1 9 0xfbff 1 0x11 AP, usable 6 1 9 0xfbff 2 0x11 AP, usable 6 1 9 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 18 EISA -- I/O APICs: APIC ID Version State Address 14 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# INT active-hi edge 18 1 14 1 INT active-hi edge 18 0 14 2 INT active-hi edge 18 3 14 3 INT active-hi edge 18 4 14 4 INT active-hi edge 18 5 14 5 INT active-hi edge 18 6 14 6 INT active-hi edge 18 7 14 7 INT active-hi edge 18 8 14 8 INT active-hi edge 18 9 14 9 INT active-hi level 18 10 14 10 INT active-hi level 18 11 14 11 INT active-hi edge 18 12 14 12 INT active-hi edge 18 13 14 13 INT active-hi edge 18 14 14 14 INT active-hi edge 18 15 14 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT active-hi edge 18 0 255 0 NMI active-hi edge 0 0:A 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- bus ID: 0 address type: prefetch address address base: 0xfc300000 address range: 0x2000000 -- bus ID: 0 address type: memory address address base: 0xfe300000 address range: 0x800000 -- bus ID: 0 address type: I/O address address base: 0xf000 address range: 0x1000 -- bus ID: 1 address type: prefetch address address base: 0xfc100000 address range: 0x100000 -- bus ID: 1 address type: memory address address base: 0xfc200000 address range: 0x100000 -- bus ID: 1 address type: I/O address address base: 0xe000 address range: 0x1000 -- bus ID: 0 address type: memory address address base: 0x80000000 address range: 0x7c100000 -- bus ID: 0 address type: memory address address base: 0xfeb00000 address range: 0x1500000 -- bus ID: 0 address type: I/O address address base: 0x0 address range: 0xe000 -- bus ID: 18 bus info: 0x01 parent bus ID: 0-- bus ID: 0 address modifier: add predefined range: 0x00000000-- bus ID: 0 address modifier: add predefined range: 0x00000001-- bus ID: 1 address modifier: subtract predefined range: 0x00000000-- bus ID: 1 address modifier: subtract predefined range: 0x00000001 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Useful: #options SMP_AUTOSTART # start the additional CPUs during boot # Optional (built-in defaults will work in most cases): #options NCPU=4 # number of CPUs #options NBUS=3 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs ------------------------------------------------------------------------------- dmesg output: 61: Probing for devices on PCI bus 62: Probing for devices on PCI bus 63: Probing for devices on PCI bus 64: Probing for devices on PCI bus 65: Probing for devices on PCI bus 66: Probing for devices on PCI bus 67: Probing for devices on PCI bus 68: Probing for devices on PCI bus 69: Probing for devices on PCI bus 70: Probing for devices on PCI bus 71: Probing for devices on PCI bus 72: Probing for devices on PCI bus 73: Probing for devices on PCI bus 74: Probing for devices on PCI bus 75: Probing for devices on PCI bus 76: Probing for devices on PCI bus 77: Probing for devices on PCI bus 78: Probing for devices on PCI bus 79: Probing for devices on PCI bus 80: Probing for devices on PCI bus 81: Probing for devices on PCI bus 82: Probing for devices on PCI bus 83: Probing for devices on PCI bus 84: Probing for devices on PCI bus 85: Probing for devices on PCI bus 86: Probing for devices on PCI bus 87: Probing for devices on PCI bus 88: Probing for devices on PCI bus 89: Probing for devices on PCI bus 90: Probing for devices on PCI bus 91: Probing for devices on PCI bus 92: Probing for devices on PCI bus 93: Probing for devices on PCI bus 94: Probing for devices on PCI bus 95: Probing for devices on PCI bus 96: Probing for devices on PCI bus 97: Probing for devices on PCI bus 98: Probing for devices on PCI bus 99: Probing for devices on PCI bus 100: Probing for devices on PCI bus 101: Probing for devices on PCI bus 102: Probing for devices on PCI bus 103: Probing for devices on PCI bus 104: Probing for devices on PCI bus 105: Probing for devices on PCI bus 106: Probing for devices on PCI bus 107: Probing for devices on PCI bus 108: Probing for devices on PCI bus 109: Probing for devices on PCI bus 110: Probing for devices on PCI bus 111: Probing for devices on PCI bus 112: Probing for devices on PCI bus 113: Probing for devices on PCI bus 114: Probing for devices on PCI bus 115: Probing for devices on PCI bus 116: Probing for devices on PCI bus 117: Probing for devices on PCI bus 118: Probing for devices on PCI bus 119: Probing for devices on PCI bus 120: Probing for devices on PCI bus 121: Probing for devices on PCI bus 122: Probing for devices on PCI bus 123: Probing for devices on PCI bus 124: Probing for devices on PCI bus 125: Probing for devices on PCI bus 126: Probing for devices on PCI bus 127: Probing for devices on PCI bus 128: Probing for devices on PCI bus 129: Probing for devices on PCI bus 130: Probing for devices on PCI bus 131: Probing for devices on PCI bus 132: Probing for devices on PCI bus 133: Probing for devices on PCI bus 134: Probing for devices on PCI bus 135: Probing for devices on PCI bus 136: Probing for devices on PCI bus 137: Probing for devices on PCI bus 138: Probing for devices on PCI bus 139: Probing for devices on PCI bus 140: Probing for devices on PCI bus 141: Probing for devices on PCI bus 142: Probing for devices on PCI bus 143: Probing for devices on PCI bus 144: Probing for devices on PCI bus 145: Probing for devices on PCI bus 146: Probing for devices on PCI bus 147: Probing for devices on PCI bus 148: Probing for devices on PCI bus 149: Probing for devices on PCI bus 150: Probing for devices on PCI bus 151: Probing for devices on PCI bus 152: Probing for devices on PCI bus 153: Probing for devices on PCI bus 154: Probing for devices on PCI bus 155: Probing for devices on PCI bus 156: Probing for devices on PCI bus 157: Probing for devices on PCI bus 158: Probing for devices on PCI bus 159: Probing for devices on PCI bus 160: Probing for devices on PCI bus 161: Probing for devices on PCI bus 162: Probing for devices on PCI bus 163: Probing for devices on PCI bus 164: Probing for devices on PCI bus 165: Probing for devices on PCI bus 166: Probing for devices on PCI bus 167: Probing for devices on PCI bus 168: Probing for devices on PCI bus 169: Probing for devices on PCI bus 170: Probing for devices on PCI bus 171: Probing for devices on PCI bus 172: Probing for devices on PCI bus 173: Probing for devices on PCI bus 174: Probing for devices on PCI bus 175: Probing for devices on PCI bus 176: Probing for devices on PCI bus 177: Probing for devices on PCI bus 178: Probing for devices on PCI bus 179: Probing for devices on PCI bus 180: Probing for devices on PCI bus 181: Probing for devices on PCI bus 182: Probing for devices on PCI bus 183: Probing for devices on PCI bus 184: Probing for devices on PCI bus 185: Probing for devices on PCI bus 186: Probing for devices on PCI bus 187: Probing for devices on PCI bus 188: Probing for devices on PCI bus 189: Probing for devices on PCI bus 190: Probing for devices on PCI bus 191: Probing for devices on PCI bus 192: Probing for devices on PCI bus 193: Probing for devices on PCI bus 194: Probing for devices on PCI bus 195: Probing for devices on PCI bus 196: Probing for devices on PCI bus 197: Probing for devices on PCI bus 198: Probing for devices on PCI bus 199: Probing for devices on PCI bus 200: Probing for devices on PCI bus 201: Probing for devices on PCI bus 202: Probing for devices on PCI bus 203: Probing for devices on PCI bus 204: Probing for devices on PCI bus 205: Probing for devices on PCI bus 206: Probing for devices on PCI bus 207: Probing for devices on PCI bus 208: Probing for devices on PCI bus 209: Probing for devices on PCI bus 210: Probing for devices on PCI bus 211: Probing for devices on PCI bus 212: Probing for devices on PCI bus 213: Probing for devices on PCI bus 214: Probing for devices on PCI bus 215: Probing for devices on PCI bus 216: Probing for devices on PCI bus 217: Probing for devices on PCI bus 218: Probing for devices on PCI bus 219: Probing for devices on PCI bus 220: Probing for devices on PCI bus 221: Probing for devices on PCI bus 222: Probing for devices on PCI bus 223: Probing for devices on PCI bus 224: Probing for devices on PCI bus 225: Probing for devices on PCI bus 226: Probing for devices on PCI bus 227: Probing for devices on PCI bus 228: Probing for devices on PCI bus 229: Probing for devices on PCI bus 230: Probing for devices on PCI bus 231: Probing for devices on PCI bus 232: Probing for devices on PCI bus 233: Probing for devices on PCI bus 234: Probing for devices on PCI bus 235: Probing for devices on PCI bus 236: Probing for devices on PCI bus 237: Probing for devices on PCI bus 238: Probing for devices on PCI bus 239: Probing for devices on PCI bus 240: Probing for devices on PCI bus 241: Probing for devices on PCI bus 242: Probing for devices on PCI bus 243: Probing for devices on PCI bus 244: Probing for devices on PCI bus 245: Probing for devices on PCI bus 246: Probing for devices on PCI bus 247: Probing for devices on PCI bus 248: Probing for devices on PCI bus 249: Probing for devices on PCI bus 250: Probing for devices on PCI bus 251: Probing for devices on PCI bus 252: Probing for devices on PCI bus 253: Probing for devices on PCI bus 254: Probing for devices on PCI bus 255: Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 at 0x378-0x37f on isa lpt1 not probed due to I/O address conflict with lpt0 at 0x378 mse0 not found at 0x23c psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found at 0xffff wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. changing root device to sd0a =============================================================================== -- jwd@unx.sas.com (w) John W. De Boskey (919) 677-8000 x6915
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708052042.AA16914>