From owner-freebsd-current Sat Oct 9 14:58:46 1999 Delivered-To: freebsd-current@freebsd.org Received: from peach.ocn.ne.jp (peach.ocn.ne.jp [210.145.254.87]) by hub.freebsd.org (Postfix) with ESMTP id 2A79314D75; Sat, 9 Oct 1999 14:58:24 -0700 (PDT) (envelope-from dcs@newsguy.com) Received: from newsguy.com (p29-dn02kiryunisiki.gunma.ocn.ne.jp [210.163.200.126]) by peach.ocn.ne.jp (8.9.1a/OCN) with ESMTP id GAA03718; Sun, 10 Oct 1999 06:58:13 +0900 (JST) Message-ID: <37FFB9FA.F2CBFF04@newsguy.com> Date: Sun, 10 Oct 1999 06:56:10 +0900 From: "Daniel C. Sobral" X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en,pt-BR,ja MIME-Version: 1.0 To: Poul-Henning Kamp Cc: "Brian F. Feldman" , current@FreeBSD.ORG Subject: Re: maxphys = 0?? References: <10693.939468246@critter.freebsd.dk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Poul-Henning Kamp wrote: > > In message , "Bria > n F. Feldman" writes: > >On Sat, 9 Oct 1999, Poul-Henning Kamp wrote: > > > >> Well, there are two options, either your sources are not up to date, > >> or your config is very special in some way... I tried again. My sources are now dated from this morning's pnpparse.c breakage, so we can be sure of it's updatedness. > What does your /etc/fstab look like ? I would also like to see a > dmesg output. And here is fstab, dmesg and kernel configuration file. # Device Mountpoint FStype Options Dump Pass# /dev/ad0s2b none swap sw 0 0 /dev/ad0s2a / ufs rw 1 1 /dev/ad0s2f /usr ufs rw 1 3 /dev/ad0s2e /var ufs rw 2 2 /dev/ad0s1 /dos msdos rw 0 0 proc /proc procfs rw 0 0 kern /kern kernfs rw 0 0 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #4: Fri Oct 8 18:11:32 JST 1999 root@daniel.sobral:/usr/src/sys/compile/DCS Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x570 Stepping = 0 Features=0x8001bf AMD Features=0x400<> real memory = 100663296 (98304K bytes) avail memory = 94580736 (92364K bytes) Preloaded elf kernel "kernel" at 0xc02b2000. Preloaded elf module "splash_bmp.ko" at 0xc02b209c. Preloaded elf module "vesa.ko" at 0xc02b2140. Preloaded splash_image_data "/boot/chuck_nebula.bmp" at 0xc02b21dc. VESA: v2.0, 1920k memory, flags:0x0, mode table:0xc02a0062 (1000022) VESA: MagicGraph 128XD 40K SVGA BIOS apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 1.0 on pci0 isa0: on isab0 pcic0: at device 10.0 on pci0 pcic1: at device 10.1 on pci0 vga-pci0: irq 11 at device 18.0 on pci0 ata-pci0: at device 20.0 on pci0 ata-pci0: Busmastering DMA not enabled ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 pccard0: on motherboard fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcm0: at irq 5 drq 1 flags 0x10 on isa0 pca0 at port 0x40 on isa0 pca0: PC speaker audio driver sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 pcic: pccard bridge VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 3 pccard: initalizing drivers: ad0: ATA-3 disk at ata0 as master ad0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 0 depth queue, PIO Creating DISK ad0 Creating DISK wd0 acd0: CDROM drive at ata1 as master acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked changing root device to wd0s2a WARNING: / was not properly dismounted pccard: card inserted, slot 1 WARNING: #ad/0x30005 maxphys = 0 ??WARNING: #ad/0x30004 maxphys = 0 ?? syncing disks... done Rebooting... Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Sun Oct 10 06:20:59 JST 1999 root@daniel.sobral:/usr/src/sys/compile/DCS Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6tm w/ multimedia extensions (233.87-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x570 Stepping = 0 Features=0x8001bf AMD Features=0x400<> real memory = 100663296 (98304K bytes) avail memory = 94584832 (92368K bytes) Preloaded elf kernel "kernel" at 0xc02b2000. Preloaded elf module "splash_bmp.ko" at 0xc02b209c. Preloaded elf module "vesa.ko" at 0xc02b2140. Preloaded splash_image_data "/boot/chuck_nebula.bmp" at 0xc02b21dc. VESA: v2.0, 1920k memory, flags:0x0, mode table:0xc02a0062 (1000022) VESA: MagicGraph 128XD 40K SVGA BIOS apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 1.0 on pci0 isa0: on isab0 pcic0: at device 10.0 on pci0 pcic1: at device 10.1 on pci0 vga-pci0: irq 11 at device 18.0 on pci0 ata-pci0: at device 20.0 on pci0 ata-pci0: Busmastering DMA not enabled ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 pccard0: on motherboard fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcm0: at irq 5 drq 1 flags 0x10 on isa0 pca0 at port 0x40 on isa0 pca0: PC speaker audio driver sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A pcic: pccard bridge VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 3 pccard: initalizing drivers: ad0: ATA-3 disk at ata0 as master ad0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 0 depth queue, PIO Creating DISK ad0 Creating DISK wd0 acd0: CDROM drive at ata1 as master acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked changing root device to wd0s2a pccard: card inserted, slot 1 WARNING: #ad/0x30005 si_iosize_max=0, using DFLTPHYS. WARNING: #ad/0x30004 si_iosize_max=0, using DFLTPHYS. The above warnings are shown at fsck time. # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.141 1999/01/01 08:09:57 peter Exp $ machine "i386" cpu "I586_CPU" cpu "I686_CPU" ident DCS maxusers 32 makeoptions DEBUG="-g" #controller acpi0 options "CPU_WT_ALLOC" options "NO_F00F_HACK" options "NO_MEMORY_HOLE" options MSGBUF_SIZE=20480 options SC_ALT_MOUSE_IMAGE #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options KERNFS options SOFTUPDATES options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options _KPOSIX_VERSION=199309L options DDB # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #options "CMD640" # work around CMD640 chip deficiency #controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xe0ffe0ff #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 controller ata0 device atadisk0 device atapicd0 #controller wdc1 at isa? port "IO_WD2" bio irq 15 flags 0xe0ffe0ff #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device acd0 #IDE CD-ROM #device wcd0 #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller aic0 at isa? port 0x340 bio irq 11 #controller scbus0 #device da0 #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 options ATKBD_DFLT_KEYMAP makeoptions ATKBD_DFLT_KEYMAP="jp.106" device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? #options VESA options SC_HISTORY_SIZE=1000 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port IO_KBD conflicts irq 1 #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at nexus? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at nexus? flags 0x00 # 0x31 # Advanced Power Management controller pnp0 #controller snd0 #device sb0 at isa? port 0x220 irq 5 conflicts drq 1 #device sbxvi0 at isa? drq 5 conflicts #device sbmidi0 at isa? port 0x300 conflicts #device opl0 at isa? port 0x388 conflicts device pcm0 at isa? port ? irq 5 drq 1 flags 0x10 #device pcm0 device pca0 at isa? port IO_TIMER1 # PCCARD (PCMCIA) support controller card0 device pcic0 at card? device pcic1 at card? # You may need to reset all pccards after resuming options PCIC_RESUME_RESET # reset after resume device sio0 at isa? port "IO_COM1" flags 0x10 irq 4 #device sio1 at isa? port "IO_COM2" irq 3 #device sio2 at isa? disable port "IO_COM3" irq 5 #device sio3 at isa? disable port "IO_COM4" irq 9 # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device mx0 #device pn0 #device rl0 #device tl0 #device tx0 #device vr0 #device vx0 #device wb0 #device xl0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 8 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device vn 2 # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # options INVARIANTS # # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. # options INVARIANT_SUPPORT # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG # The `bpf' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpf 8 #Berkeley packet filter -- Daniel C. Sobral (8-DCS) dcs@newsguy.com dcs@freebsd.org "I always feel generous when I'm in the inner circle of a conspiracy to subvert the world order and, with a small group of allies, just defeated an alien invasion. Maybe I should value myself a little more?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message