Date: Wed, 28 Sep 2005 21:03:37 +0200 From: Jeremie Le Hen <jeremie@le-hen.org> To: freebsd-current@FreeBSD.org Subject: ATA/DMA problem after reboot Message-ID: <20050928190336.GA1027@obiwan.tataz.chchile.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi list,
one of my boxes running FreeBSD 6.0-BETA5 experiences the problem
described below. I must add that this box never ran something else
than FreeBSD, and I've been seeing this since the beginning, back to
FreeBSD 5.x.
The box run quite well most of the time, i.e. no particular ATA
problem, when the box has just been powered up. However, after a
reboot, whether soft or hard, I get READ_DMA errors for all my ATA
drives.
I would be glad if one could give me some clues or hints on how to debug
this. I understand this may be a kind of weird hardware problem that
could not be worked around, but I'd like to be sure about this.
The verbose dmesg: is attached, the READ_DMA errors can be seen at the
very end of it. I also attached my kernel configuration file in case it
is relevant.
Thank you.
Regards,
--
Jeremie Le Hen
< jeremie at le-hen dot org >< ttz at chchile dot org >
[-- Attachment #2 --]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #2: Wed Sep 28 14:49:35 CEST 2005
root@obiwan.tataz.chchile.org:/usr/obj/usr/src/sys/OBIWAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a6000.
Preloaded elf module "/boot/kernel/if_vr.ko" at 0xc08a6194.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc08a6240.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08a62ec.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc08a6398.
Calibrating clock(s) ... i8254 clock: 1193172 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1792728156 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1792.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 532611072 (507 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f2c9fff, 510283776 bytes (124581 pages)
avail memory = 511713280 (488 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb000
bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4d0
pnpbios: Found PnP BIOS data at 0xc00fbe90
pnpbios: Entry = f0000:bec0 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
netsmb_dev: loaded
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06501039)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fd5b0
PCI-Only Interrupts: 5 9 11 12
Location Bus Device Pin Link IRQs
slot 1 0 6 A 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 B 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 C 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 D 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 A 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 B 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 C 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 D 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 A 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 B 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 C 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 D 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 A 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 B 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 C 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 D 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 A 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 B 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 C 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 D 0x44 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x41 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x42 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x43 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x44 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x42 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x43 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x44 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x41 255 N 6 3 4 5 6 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.7.INTA at func 0: 11
$PIR: Found matching pin for 0.7.INTB at func 1: 5
$PIR: Found matching pin for 0.8.INTA at func 0: 5
$PIR: Found matching pin for 0.15.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x42 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x43 11 Y 6 3 4 5 6 7 9 10 11 12 14 15
0x44 5 Y 6 3 4 5 6 7 9 10 11 12 14 15
0x41 255 N 6 3 4 5 6 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 6 0 0 0 0 0 6 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1039, dev=0x0650, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e0000000, size 23, enabled
found-> vendor=0x1039, dev=0x0001, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x00
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x7001, revid=0x07
bus=0, slot=2, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=11
map[10]: type 1, range 32, base cb9e2000, size 12, enabled
$PIR: No matching entry for 0.2.INTD
found-> vendor=0x1039, dev=0x7001, revid=0x07
bus=0, slot=2, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base cb9e3000, size 12, enabled
$PIR: No matching entry for 0.2.INTA
found-> vendor=0x1039, dev=0x5513, revid=0xd0
bus=0, slot=2, func=5
class=01-01-80, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 4, enabled
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000b400, size 8, enabled
map[14]: type 4, range 32, base 0000b000, size 7, enabled
$PIR: No matching entry for 0.2.INTC
found-> vendor=0x1011, dev=0x0026, revid=0x05
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=0, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base cb9a0000, size 17, enabled
map[18]: type 1, range 64, base cb900000, size 18, enabled
map[20]: type 4, range 32, base 0000b800, size 6, enabled
$PIR: 0:7 INTA routed to irq 11
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=0, slot=7, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base cb980000, size 17, enabled
map[18]: type 1, range 64, base cb940000, size 18, enabled
map[20]: type 4, range 32, base 0000bc00, size 6, enabled
$PIR: 0:7 INTB routed to irq 5
found-> vendor=0x104c, dev=0x9066, revid=0x00
bus=0, slot=8, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base cb9e0000, size 13, enabled
map[14]: type 1, range 32, base cb9c0000, size 17, enabled
$PIR: 0:8 INTA routed to irq 5
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 8, enabled
map[14]: type 1, range 32, base cb9e4000, size 8, enabled
$PIR: 0:15 INTA routed to irq 11
agp0: <SiS 650 host to AGP bridge> mem 0xe0000000-0xe07fffff at device 0.0 on pci0
agp0: Reserved 0x800000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 8M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xcb800000-0xcb8fffff
pcib1: prefetched decode 0xc0000000-0xc7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1039, dev=0x6325, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base c0000000, size 27, enabled
pcib1: (null) requested memory range 0xc0000000-0xc7ffffff: good
map[14]: type 1, range 32, base cb800000, size 17, enabled
pcib1: (null) requested memory range 0xcb800000-0xcb81ffff: good
map[18]: type 4, range 32, base 00009000, size 7, enabled
pcib1: (null) requested I/O range 0x9000-0x907f: in range
$PIR: Found IRQ 9 for link 0x41 from 5 9 11 12
$PIR: ROUTE_INTERRUPT failed.
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <serial bus, USB> at device 2.3 (no driver attached)
atapci0: <SiS 961 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x52 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=52 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xb400-0xb4ff,0xb000-0xb07f irq 11 at device 2.7 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb400
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xb000
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC200 AC97 Codec (id = 0x414c4710)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 1f094000, 4000; 0xd5cc6000 -> 1f094000
pcm0: sndbuf_setmap 1f08f000, 4000; 0xd5cca000 -> 1f08f000
pcib2: <PCI-PCI bridge> at device 6.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xafff
pcib2: memory decode 0xc8000000-0xc9ffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x10b7, dev=0x9805, revid=0x78
bus=2, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000a000, size 7, enabled
pcib2: (null) requested I/O range 0xa000-0xa07f: in range
map[14]: type 1, range 32, base c9000000, size 7, enabled
pcib2: (null) requested memory range 0xc9000000-0xc900007f: good
$PIR: Found IRQ 9 for link 0x42 from 5 9 11 12
$PIR: ROUTE_INTERRUPT failed.
found-> vendor=0x10b7, dev=0x9805, revid=0x78
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000a400, size 7, enabled
pcib2: (null) requested I/O range 0xa400-0xa47f: in range
map[14]: type 1, range 32, base c9001000, size 7, enabled
pcib2: (null) requested memory range 0xc9001000-0xc900107f: good
$PIR: 0:6 INTB routed to irq 11
pcib2: slot 5 INTA is routed to irq 11
xl0: <3Com 3c980C Fast Etherlink XL> port 0xa000-0xa07f mem 0xc9000000-0xc900007f irq 12 at device 4.0 on pci2
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xc9000000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:04:75:bf:ec:71
xl0: [MPSAFE]
xl1: <3Com 3c980C Fast Etherlink XL> port 0xa400-0xa47f mem 0xc9001000-0xc900107f irq 11 at device 5.0 on pci2
xl1: Reserved 0x80 bytes for rid 0x14 type 3 at 0xc9001000
xl1: using memory mapped I/O
xl1: media options word: a
xl1: found MII/AUTO
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: bpf attached
xl1: Ethernet address: 00:04:75:bf:ec:72
xl1: [MPSAFE]
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xb800-0xb83f mem 0xcb9a0000-0xcb9bffff,0xcb900000-0xcb93ffff irq 11 at device 7.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcb9a0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xb800
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:04:23:89:e5:84
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xbc00-0xbc3f mem 0xcb980000-0xcb99ffff,0xcb940000-0xcb97ffff irq 5 at device 7.1 on pci0
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcb980000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xbc00
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:04:23:89:e5:85
em1: Speed:N/A Duplex:N/A
pci0: <network> at device 8.0 (no driver attached)
pci0: <network, ethernet> at device 15.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 18 devices, largest 98 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x20000000-0x203fffff, size=0x400000
PNP0c01: adding fixed memory32 range 0xffee0000-0xffefffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1fbfffff, size=0x1fb00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x1000-0x107f, size=0x80, align=0
PNP0c02: adding io range 0x1080-0x109f, size=0x20, align=0
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x3f0-0x3f1, size=0x2, align=0
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 14 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 18 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 19 device ID PNPb02f (2fb0d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0x20000000-0x203fffff,0xffee0000-0xffefffff on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x3f0-0x3f1 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0401> failed to probe at port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
unknown: <PNPb02f> failed to probe at port 0x201-0x207,0x200 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1792728156 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v4.1.8 initialized. Default = pass all, Logging = enabled
pflog0: bpf attached
pfsync0: bpf attached
DUMMYNET with IPv6 initialized (040826)
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
lo0: bpf attached
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ad0: setting PIO4 on SiS 5513 chip
ad0: setting UDMA66 on SiS 5513 chip
ad0: 9779MB <WDC WD102BA 16.13M16> at ata0-master UDMA66
ad0: 20028960 sectors [19870C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad1: setting PIO4 on SiS 5513 chip
ad1: setting UDMA66 on SiS 5513 chip
ad1: 29188MB <Seagate ST330630A 3.21> at ata0-slave UDMA66
ad1: 59777640 sectors [59303C/16H/63S] 16 sectors/interrupt 1 depth queue
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad2: setting PIO4 on SiS 5513 chip
ad2: setting UDMA100 on SiS 5513 chip
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA100
ad2: 160086528 sectors [39236C/16H/255S] 16 sectors/interrupt 1 depth queue
ad3: setting PIO4 on SiS 5513 chip
ad3: setting UDMA100 on SiS 5513 chip
ad3: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-slave UDMA100
ad3: 160086528 sectors [39236C/16H/255S] 16 sectors/interrupt 1 depth queue
pcm0: measured ac97 link rate at 48013 Hz, will use 48000 Hz
GEOM: new disk ad1
GEOM: new disk ad2
GEOM: new disk ad3
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=128
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=128
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=128
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=512
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=512
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=512
ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=64
ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=64
ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=64
fdc0: output ready timeout
ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
fdc0: input ready timeout
ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=63
fdc0: input ready timeout
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
fdc0: output ready timeout
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=63
fdc0: input ready timeout
fdc0: input ready timeout
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=64
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=64
fdc0: output ready timeout
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=64
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
fdc0: input ready timeout
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=63
fdc0: input ready timeout
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=191
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=191
fdc0: output ready timeout
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=191
fdc0: input ready timeout
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=79
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=79
fdc0: input ready timeout
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=79
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=63
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=575
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=575
ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=575
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
[-- Attachment #3 --]
machine i386
cpu I686_CPU
ident OBIWAN
maxusers 0
makeoptions DEBUG=-g
makeoptions MODULES_OVERRIDE="linux syscons sound xl vr em rl"
option KBD_INSTALL_CDEV #Install a CDEV entry in /dev
option KDB #Enable kernel debugger support
option DDB #Support DDB
option GDB #Support remote DDB
option PREEMPTION
option INVARIANTS #Enable calls of extra-sanity checking
option INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
#option WITNESS #Enable checks to detect deadlocks and cycles
#option WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
option FFS #Berkeley Fast Filesystem
option SOFTUPDATES #Enable FFS soft updates support
option UFS_DIRHASH #Improve performance on big directories
option QUOTA #Enable disk quotas
option SUIDDIR
option EXT2FS #Enable Linux filesystem support
option MSDOSFS #MSDOS Filesystem
option CD9660 #ISO 9660 Filesystem
option NTFS #NT File System
option GEOM_BDE #Disk encryption.
option GEOM_BSD #BSD disklabels
option GEOM_CONCAT #Disk concatenation.
option GEOM_FOX #Redundant path mitigation
option GEOM_GATE #Userland services.
option GEOM_MBR #DOS/MBR partitioning
option GEOM_VOL #Volume names from UFS superblock
option PROCFS #Process filesystem (requires PSEUDOFS)
option PSEUDOFS #Pseudo-filesystem framework
option NULLFS #NULL filesystem
option PORTALFS #Portal filesystem
option FDESCFS #File descriptor filesystem
option UDF #Universal Disk Format
#option UMAPFS #UID map filesystem (BORKEN)
option UNIONFS #Union filesystem
option NFSCLIENT #Network Filesystem Client
option NFSSERVER #Network Filesystem Server
option SMBFS #SMB/CIFS filesystem
option NETSMB #SMB/CIFS requester
option NETSMBCRYPTO #Encrypted password support for SMB
option LIBMCHAIN #Mbuf management library
option LIBICONV #Needed by NETSMB
option COMPAT_43 #Compatible with BSD 4.3
#option COMPAT_FREEBSD4 #Compatible with FreeBSD4
option COMPAT_FREEBSD5 #Compatible with FreeBSD5
#option COMPAT_LINUX #Enable Linux ABI emulation
#option COMMPAT_AOUT #Enable i386 a.out binary support
#option LINPROCFS #Enable linux-proc like proc fs support
option SCHED_4BSD #4BSD scheduler
option KTRACE #ktrace(1) support
option SYSVSHM #SYSV-style shared memory
option SYSVMSG #SYSV-style message queues
option SYSVSEM #SYSV-style semaphores
option INET #InterNETworking
#option INET6 #IPv6 communications protocols
#option IPSEC #IP security
#option IPSEC_ESP #IP security (crypto; define w/ IPSEC)
#option PFIL_HOOKS
option IPFIREWALL #Firewall
option IPFIREWALL_VERBOSE #Enable logging to syslogd(8)
option IPFIREWALL_VERBOSE_LIMIT=100 #Limit verbosity
option IPFIREWALL_DEFAULT_TO_ACCEPT #Allow everything by default
option IPFIREWALL_FORWARD #Packet destination changes
option IPFIREWALL_FORWARD_EXTENDED
#option IPV6FIREWALL #Firewall for IPv6
#option IPV6FIREWALL_VERBOSE
#option IPV6FIREWALL_VERBOSE_LIMIT=100
#option IPV6FIREWALL_DEFAULT_TO_ACCEPT
option IPFILTER #Ipfilter support
option IPFILTER_LOG #Ipfilter logging
#option IPFILTER_DEFAULT_BLOCK #Block all packets by default
option TCP_DROP_SYNFIN #Drop TCP packets with SYN+FIN
option DUMMYNET
option ALTQ
option ALTQ_CBQ # Class Bases Queueing
option ALTQ_RED # Random Early Drop
option ALTQ_RIO # RED In/Out
option ALTQ_HFSC # Hierarchical Packet Scheduler
option ALTQ_CDNR # Traffic conditioner
option ALTQ_PRIQ # Priority Queueing
#option ALTQ_NOPCC # Required for SMP build
#option BRIDGE
option HZ=100
# NDIS
#option NDISAPI
#device ndis
device mem
device io
# Cryptographically secure random number generator
device random # Entropy device
# Virtual network interfaces
device loop # Network loopback
device ether # Ethernet support
device vlan # VLAN support
device wlan # 802.11 support
#device ppp # Kernel PPP
#device tun # Packet tunnel
#device gif # IPv6 and IPv4 tunneling
device bpf # Berkeley packet filter
device pf # PF OpenBSD packet-filter firewall
device pflog # Logging support interface for PF
device pfsync # Synchronization interface for PF
# Miscellaneous devices
device pty # Pseudo-ttys (telnet etc)
#device gzip # Exec gzipped a.out's
device snp # Snoop device
#device md # Memory "disks"
device ccd # Concatened disk driver
#device vinum # Vinum concat/mirror/raid driver
# Hardware bus
device isa
device pci
device agp
# Floppy drives.
device fdc
# Network interfaces
device miibus
device em # Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
#device vr # VIA Rhina, Rhine II
#device ath # Atheros a/b/g Wifi adapters
#device ath_hal # Atheros HAL
#device an
#device awi
#device cnw
#device wi
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#option ATA_STATIC_ID # Static device numbering
# Mandatory devices
device npx # Floating point support
device atkbdc # Keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # Video card drriver for VGA adapters
device splash # Splash screen/screen saver
option FAT_CURSOR # Start with block cursor
device sc # Syscons console driver
option SC_ALT_MOUSE_IMAGE # Simplified mouse cursor in text mode
#option SC_DISABLE_DDBKEY # Disable `debug' key
option SC_DISABLE_REBOOT # Disable reboot key sequence
option SC_HISTORY_SIZE=1600 # Number of history buffer lines
option SC_PIXEL_MODE # Add support for the raster text mode
#option SC_TWOBUTTON_MOUSE # Use right mouse button to paste
# Serial and Parallel ports
device uart # Newbusified driver for serial intf
device sio # Serial (COM) ports
#device ppc # Parallel ports
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# USB support
device uhci # UHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic USB device driver
device ukbd # Keyboard
device ums # Mouse
device umass # USB mass storage
# Required by umass
device scbus # Base SCSI code
device da # SCSI direct access devices (disks)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050928190336.GA1027>