Date: Wed, 9 Jan 2002 14:54:09 +0000 (WET) From: FreeBSD <freebsd@samurai.deec.uc.pt> To: stable@freebsd.org Cc: paulo@isr.uc.pt Subject: Can't boot FreeBSD on a Toshiba Laptop Message-ID: <Pine.BSF.4.21.0201091439420.782-300000@samurai.deec.uc.pt>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi all,
After being using FreeBSD since version 1.x this is the first time I
find a machine where I can't really boot it. It is a Toshiba Satellite
3000-504.
I have tried from 4.3 to 4.5-PRERELEASE and all failled more or less at
the same point. Below goes a transcription of the last messages (I had to
type them because this model doesn't have serial ports at all).
...
atapci0: <Generic PCI ATA controller port
0x1860-0x166f,0x374-0x377,0x170-0x177, 0x3f4-0x3f7,0x1f0-0x1f7 mem
0xd0000000-0xd00003ff at device 3.1 on pci0
ata0 at 0x1f0 irq 14 on atapci0
ata1 at 0x170 irq 15 on atapci0
pci0: <Unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 10
pci0: <Unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 10
pci0: <Unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 10
->BOOOOMMMMMMM<- Locks here
Unfortunately currently I can only use windows ou linux, but I'd like to
remove the later and use FreeBSD on it.
I have attached the windows configuration and linux dmesg maybe one of
them can help.
Regards
Paulo
[-- Attachment #2 --]
Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009e800 @ 0000000000000000 (usable)
BIOS-e820: 0000000000001800 @ 000000000009e800 (reserved)
BIOS-e820: 0000000000008000 @ 00000000000d8000 (reserved)
BIOS-e820: 000000000001c000 @ 00000000000e4000 (reserved)
BIOS-e820: 000000000fdf0000 @ 0000000000100000 (usable)
BIOS-e820: 000000000000f000 @ 000000000fef0000 (ACPI data)
BIOS-e820: 0000000000001000 @ 000000000feff000 (ACPI NVS)
BIOS-e820: 0000000000080000 @ 000000000ff00000 (usable)
BIOS-e820: 0000000000080000 @ 000000000ff80000 (reserved)
BIOS-e820: 0000000000080000 @ 00000000ffb80000 (reserved)
BIOS-e820: 0000000000000400 @ 00000000fffffc00 (reserved)
On node 0 totalpages: 65408
zone(0): 4096 pages.
zone DMA has max 32 cached pages.
zone(1): 61312 pages.
zone Normal has max 479 cached pages.
zone(2): 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz-2.4.2-2 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 996.710 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 254784k/261632k available (1365k kernel code, 6392k reserved, 92k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd96a, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
PCI: Found IRQ 5 for device 00:1f.1
PCI: The same IRQ used for device 00:1d.2
PCI: Found IRQ 10 for device 02:04.0
PCI: The same IRQ used for device 00:1d.0
PCI: The same IRQ used for device 01:00.0
PCI: The same IRQ used for device 02:00.0
PCI: Found IRQ 10 for device 02:04.1
PCI: The same IRQ used for device 00:1f.3
PCI: The same IRQ used for device 00:1f.5
PCI: The same IRQ used for device 00:1f.6
PCI: The same IRQ used for device 02:01.0
got res[d2005000:d2005fff] for resource 0 of Texas Instruments PCI1420
got res[d2006000:d2006fff] for resource 0 of Texas Instruments PCI1420 (#2)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169114kB/56371kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=248a
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 5 for device 00:1f.1
PCI: The same IRQ used for device 00:1d.2
PCI_IDE: chipset revision 1
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA MK2017GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB), CHS=2432/255/63
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 481940k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr 8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:1d.0
PCI: The same IRQ used for device 01:00.0
PCI: The same IRQ used for device 02:00.0
PCI: The same IRQ used for device 02:04.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:1d.1
PCI: The same IRQ used for device 02:06.0
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:1d.2
PCI: The same IRQ used for device 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 4
usb.c: USB device 4 (vend/prod 0x603/0x6871) is not claimed by any active driver.
usb.c: registered new driver hid
input0: USB HID v1.00 Mouse [NOVATEK USB Mouse STD. ] on usb1:4.0
mouse0: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 15
0x378: readIntrThreshold is 15
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x40
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (2044 buckets, 16352 max)
8139too Fast Ethernet driver 0.9.15 loaded
PCI: Found IRQ 10 for device 02:01.0
PCI: The same IRQ used for device 00:1f.3
PCI: The same IRQ used for device 00:1f.5
PCI: The same IRQ used for device 00:1f.6
PCI: The same IRQ used for device 02:04.1
eth0: RealTek RTL8139 Fast Ethernet at 0xd089d800, 00:02:3f:73:44:b3, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139B'
Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 10 for device 02:04.0
PCI: The same IRQ used for device 00:1d.0
PCI: The same IRQ used for device 01:00.0
PCI: The same IRQ used for device 02:00.0
PCI: Found IRQ 10 for device 02:04.1
PCI: The same IRQ used for device 00:1f.3
PCI: The same IRQ used for device 00:1f.5
PCI: The same IRQ used for device 00:1f.6
PCI: The same IRQ used for device 02:01.0
Yenta IRQ list 0a98, PCI irq10
Socket status: 30000006
Yenta IRQ list 0a98, PCI irq10
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
NVRM: loading NVIDIA NVdriver Kernel Module 1.0.2313 Tue Nov 27 12:01:24 PST 2001
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Intel chipset (device id: 3575), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
NVRM: AGPGART: unable to retrieve symbol table
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
[-- Attachment #3 --]
Machine Type: AT/AT COMPATIBLE
System BIOS Version: TOSCPL - 6040000
System BIOS Date: 11/09/01
Processor Type: x86 Family 6 Model 11 Stepping 1 Processor Vendor: GenuineIntel
Number of Processors: 1
Physical Memory: 255 MB
******************** DISK DRIVE INFO ********************
Drive A:Type: 3.5" 1.44MB floppy disk drive
Total Space: 1.474.560 bytes
Heads: 2 Cylinders: 80
Sectors Per Track: 18 Bytes Per Sector: 512
Drive C:Type: Fixed disk drive
Total Space: 10.487.197.696 bytes
Free Space: 4.791.808.000 bytes
Heads: 255 Cylinders: 2432 Sectors Per Track: 63
Bytes Per Sector: 512
******************** IRQ SUMMARY ******************** IRQ Usage Summary:
(ISA) 0 System timer
(ISA) 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
(ISA) 3 SMC IrCC - Fast Infrared Port
(ISA) 6 Standard floppy disk controller
(ISA) 8 System CMOS/real time clock
(ISA) 9 Microsoft ACPI-Compliant System
(PCI) 9 NVIDIA GeForce2 Go
(PCI) 9 Standard Universal PCI to USB Host Controller
(PCI) 9 Standard Universal PCI to USB Host Controller
(PCI) 9 Standard Universal PCI to USB Host Controller
(PCI) 9 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
(PCI) 9 Realtek RTL8139 Family PCI Fast Ethernet NIC
(PCI) 9 Texas Instruments PCI-1420 CardBus Controller
(PCI) 9 Texas Instruments PCI-1420 CardBus Controller
(PCI) 9 Toshiba Semiconductor SM Host Controller
(PCI) 9 Intel(r) 82801CA/CAM AC'97 Audio Controller
(PCI) 9 TOSHIBA Software Modem AMR
(PCI) 10 Intel(R) 82801CA/CAM SMBus Controller - 2483
(ISA) 12 Alps Pointing-device
(ISA) 13 Numeric data processor
(ISA) 14 Primary IDE Channel
(ISA) 15 Secondary IDE Channel
******************** DMA USAGE SUMMARY ******************** DMA Usage Summary:
1 ECP Printer Port (LPT1)
2 Standard floppy disk controller
3 SMC IrCC - Fast Infrared Port
4 Direct memory access controller
******************** MEMORY SUMMARY ******************** Memory Usage Summary:
[000A0000 - 000BFFFF] PCI bus
[000A0000 - 000BFFFF] Intel(R) 82830 Processor to AGP Controller
[000A0000 - 000BFFFF] NVIDIA GeForce2 Go
[000D0000 - 000D3FFF] PCI bus
[000D4000 - 000D7FFF] PCI bus
[000D6000 - 000D6FFF] Texas Instruments PCI-1420 CardBus Controller
[000D7000 - 000D7FFF] Texas Instruments PCI-1420 CardBus Controller
[000E0000 - 000E3FFF] PCI bus
[10000000 - FEBFFFFF] PCI bus
[D1000000 - D1FFFFFF] Intel(R) 82830 Processor to AGP Controller
[D1000000 - D1FFFFFF] NVIDIA GeForce2 Go
[D2000000 - D2003FFF] Texas Instruments OHCI Compliant IEEE 1394 Host Controller
[D2004000 - D20047FF] Texas Instruments OHCI Compliant IEEE 1394 Host Controller
[D2004800 - D20048FF] Realtek RTL8139 Family PCI Fast Ethernet NIC
[D2004C00 - D2004C1F] Toshiba Semiconductor SM Host Controller
[DC000000 - DFFFFFFF] Texas Instruments PCI-1420 CardBus Controller
[E0000000 - EFFFFFFF] Intel(R) 82830 Processor to AGP Controller
[F0000000 - F7FFFFFF] Intel(R) 82830 Processor to AGP Controller
[F0000000 - F7FFFFFF] NVIDIA GeForce2 Go
[FABFB000 - FABFBFFF] Texas Instruments PCI-1420 CardBus Controller
[FABFC000 - FABFCFFF] Texas Instruments PCI-1420 CardBus Controller
[FABFD000 - FEBFCFFF] Texas Instruments PCI-1420 CardBus Controller
[FEBFD000 - FEBFDFFF] Texas Instruments PCI-1420 CardBus Controller
[FEBFE000 - FEBFEFFF] Texas Instruments PCI-1420 CardBus Controller
[FEBFF800 - FEBFFBFF] Intel(r) 82801CAM Ultra ATA Storage Controller-248A
[FEBFFC00 - FEBFFFFF] Motherboard resources
[FFF80000 - FFFFFFFF] Motherboard resources
******************** IO PORT SUMMARY ******************** I/O Ports Usage Summary:
[00000000 - 00000CF7] PCI bus
[00000000 - 0000001F] Direct memory access controller
[00000020 - 00000021] Programmable interrupt controller
[00000024 - 00000025] Programmable interrupt controller
[00000028 - 00000029] Programmable interrupt controller
[0000002C - 0000002D] Programmable interrupt controller
[0000002E - 0000002F] Motherboard resources
[00000030 - 00000031] Programmable interrupt controller
[00000034 - 00000035] Programmable interrupt controller
[00000038 - 00000039] Programmable interrupt controller
[0000003C - 0000003D] Programmable interrupt controller
[00000040 - 00000043] System timer
[00000050 - 00000053] System timer
[00000060 - 00000060] Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
[00000061 - 00000061] Motherboard resources
[00000062 - 00000062] Microsoft ACPI-Compliant Embedded Controller
[00000063 - 00000063] Motherboard resources
[00000064 - 00000064] Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
[00000065 - 00000065] Motherboard resources
[00000066 - 00000066] Microsoft ACPI-Compliant Embedded Controller
[00000067 - 00000067] Motherboard resources
[00000070 - 00000077] System CMOS/real time clock
[00000080 - 00000080] Motherboard resources
[00000081 - 0000008F] Direct memory access controller
[00000090 - 00000091] Direct memory access controller
[00000092 - 00000092] Motherboard resources
[00000093 - 0000009F] Direct memory access controller
[000000A0 - 000000A1] Programmable interrupt controller
[000000A4 - 000000A5] Programmable interrupt controller
[000000A8 - 000000A9] Programmable interrupt controller
[000000AC - 000000AD] Programmable interrupt controller
[000000B0 - 000000B1] Programmable interrupt controller
[000000B4 - 000000B5] Programmable interrupt controller
[000000B8 - 000000B9] Programmable interrupt controller
[000000BC - 000000BD] Programmable interrupt controller
[000000C0 - 000000DF] Direct memory access controller
[000000F0 - 000000F0] Numeric data processor
[00000170 - 00000177] Secondary IDE Channel
[000001F0 - 000001F7] Primary IDE Channel
[00000274 - 00000277] ISAPNP Read Data Port
[00000279 - 00000279] ISAPNP Read Data Port
[000002F8 - 000002FF] SMC IrCC - Fast Infrared Port
[00000376 - 00000376] Secondary IDE Channel
[00000378 - 0000037B] ECP Printer Port (LPT1)
[000003B0 - 000003BB] Intel(R) 82830 Processor to AGP Controller
[000003B0 - 000003BB] NVIDIA GeForce2 Go
[000003C0 - 000003DF] Intel(R) 82830 Processor to AGP Controller
[000003C0 - 000003DF] NVIDIA GeForce2 Go
[000003F0 - 000003F5] Standard floppy disk controller
[000003F6 - 000003F6] Primary IDE Channel
[000003F7 - 000003F7] Standard floppy disk controller
[000004D0 - 000004D1] Programmable interrupt controller
[00000600 - 0000060F] Motherboard resources
[000006F8 - 000006FF] SMC IrCC - Fast Infrared Port
[00000700 - 0000070F] Motherboard resources
[00000778 - 0000077B] ECP Printer Port (LPT1)
[00000A79 - 00000A79] ISAPNP Read Data Port
[00000D00 - 0000FFFF] PCI bus
[00001000 - 0000107F] Motherboard resources
[00001180 - 000011BF] Motherboard resources
[00001200 - 0000120F] Motherboard resources
[00001800 - 0000181F] Standard Universal PCI to USB Host Controller
[00001820 - 0000183F] Standard Universal PCI to USB Host Controller
[00001840 - 0000185F] Standard Universal PCI to USB Host Controller
[00001860 - 0000186F] Intel(r) 82801CAM Ultra ATA Storage Controller-248A
[00001880 - 0000189F] Intel(R) 82801CA/CAM SMBus Controller - 2483
[000018C0 - 000018FF] Intel(r) 82801CA/CAM AC'97 Audio Controller
[00001C00 - 00001CFF] Intel(r) 82801CA/CAM AC'97 Audio Controller
[00002000 - 0000207F] TOSHIBA Software Modem AMR
[00002400 - 000024FF] TOSHIBA Software Modem AMR
[00003000 - 000030FF] Realtek RTL8139 Family PCI Fast Ethernet NIC
[0000F900 - 0000F9FF] Texas Instruments PCI-1420 CardBus Controller
[0000FA00 - 0000FAFF] Texas Instruments PCI-1420 CardBus Controller
[0000FC00 - 0000FCFF] Texas Instruments PCI-1420 CardBus Controller
[0000FD00 - 0000FDFF] Texas Instruments PCI-1420 CardBus Controller
[0000FE00 - 0000FE01] Motherboard resources
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0201091439420.782-300000>