Date: Wed, 27 Aug 2008 12:58:56 +0200 (CEST) From: Gheorghe Ardelean <ardelean@ww.uni-erlangen.de> To: <freebsd-sparc64@freebsd.org> Subject: Read errors on Blade 100 with 7.0-RELEASE and SATA DISKS Message-ID: <Pine.LNX.4.33.0808271210050.6839-100000@servww6.ww.uni-erlangen.de>
next in thread | raw e-mail | index | archive | help
Hi, I am trying to use my Blade 100 as an FTP server so I have installed a PCI SATA controller (VIA Chip) and a WD 400GB SATA HDD. I was able to write to it over the network a 120GB file but when I try to read it I get only read errors. Here are the details: ad1: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=638190336 ad1: TIMEOUT - READ_DMA48 retrying (0 retries left) LBA=638190336 ad1: FAILURE - READ_DMA48 timed out LBA=638190336 g_vfs_done():ad1d[READ(offset=326753452032, length=131072)]error = 5 sunblade100# uname -a FreeBSD sunblade100 7.0-RELEASE FreeBSD 7.0-RELEASE #2: Wed Mar 19 18:21:16 CET 2008 root@sunblade100:/usr/src/sys/sparc64/compile/GENERIC sparc64 sunblade100# dmesg ... nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0 pcib0: Hummingbird compatible, impl 0, version 0, IGN 0x1f, bus A pcib0: [FILTER] pcib0: [FILTER] pcib0: [GIANT-LOCKED] pcib0: [ITHREAD] pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff pcib0: [FILTER] pci0: <OFW PCI bus> on pcib0 ... pcib1: <OFW PCI-PCI bridge> at device 5.0 on pci0 pci1: <OFW PCI bus> on pcib1 atapci1: <VIA 6421 SATA150 controller> port 0x1000-0x100f,0x1010-0x101f,0x1020-0x102f,0x1030-0x103f,0x1040-0x105f,0x1100-0x11ff at device 0.0 on pci1 atapci1: [ITHREAD] ... ad0: 14594MB <Seagate ST315320A 3.21> at ata2-master UDMA66 acd0: CDRW <LTN485S/JOU2> at ata2-slave PIO4 ad1: 381554MB <WDC WD4000YR-01PLB0 01.06A01> at ata4-master SATA150 Did anybody have experience with such a configuration (SATA + FreeBSD sparc64)? What could be the problem of this read timeout (I was able to write to it over a 100BaseTX network with 8MB/s without issues)? Best regards, Gheorghe Ardelean. P.S. My GENERIC differs from the original GENERIC.orig only by: sunblade100# diff -u GENERIC.orig GENERIC --- GENERIC.orig 2007-10-11 08:20:27.000000000 +0200 +++ GENERIC 2008-08-27 12:56:54.000000000 +0200 @@ -236,3 +236,12 @@ device fwip # IP over FireWire (RFC 2734,3146) device dcons # Dumb console driver device dcons_crom # Configuration ROM for dcons + + +device sound +device snd_ad1816 +device snd_audiocs +device snd_es137x +device snd_mss + + because I have tried, without success, to get sound working.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0808271210050.6839-100000>