Date: Fri, 9 May 2003 12:07:36 -0400 From: "Moore, Eric Dean" <emoore@lsil.com> To: benkovsky@nextra.cz, freebsd-scsi@freebsd.org Subject: RE: RAID status on PowerEdge 2600 with Perc 4/DI Message-ID: <0E3FA95632D6D047BA649F95DAB60E57023AE16D@EXA-ATLANTA.se.lsil.com>
next in thread | raw e-mail | index | archive | help
MegaRAID - http://people.freebsd.org/~emoore/MegaRAID_SCSI/UserInterfaceGUI/ MegaMON - http://people.freebsd.org/~emoore/MegaRAID_SCSI/Daemon/ Eric Moore > -----Original Message----- > From: benkovsky@nextra.cz [mailto:benkovsky@nextra.cz] > Sent: Friday, May 09, 2003 10:29 AM > To: freebsd-scsi@freebsd.org > Subject: RAID status on PowerEdge 2600 with Perc 4/DI > > > Hi, folks, > > I apologize if I ask a faq, but I did not find anything about > the subject. > > I have a Dell PE 2600 with LSILogic PERC 4/Di RAID controller. > FreeBSD 4.8 detects the status of the RAID during the boot fine: > > amr0: <LSILogic MegaRAID> mem 0xfebf0000-0xfebfffff irq 11 at > device 8.0 on pci8 > amr0: <LSILogic PERC 4/Di> Firmware 2.20, BIOS 1.03, 128MB RAM > .... > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 349390MB (715550720 sectors) RAID 5 (degraded) > .... > pass0 at amr0 bus 0 target 6 lun 0 > pass0: <PE/PV 1x6 SCSI BP 0.29> Fixed Processor SCSI-2 device > > I would like to get the information about degraded status / > disk removal > in /var/log/messages without a need to reboot the machine, > but I could not find > how - ses does not work or I am doing something stupid. > > Is there currently a way to do so? > > Thank you for any help, > Jarda Benkovsky > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to > "freebsd-scsi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0E3FA95632D6D047BA649F95DAB60E57023AE16D>