From owner-freebsd-current@FreeBSD.ORG Tue Oct 18 22:02:40 2005 Return-Path: X-Original-To: freebsd-current@freebsd.org Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B867516A420 for ; Tue, 18 Oct 2005 22:02:40 +0000 (GMT) (envelope-from joe@getsomewhere.net) Received: from mail1.quietroad.net (mail.quietroad.net [69.8.149.151]) by mx1.FreeBSD.org (Postfix) with ESMTP id 16AFA43D46 for ; Tue, 18 Oct 2005 22:02:39 +0000 (GMT) (envelope-from joe@getsomewhere.net) Received: from localhost (unknown [127.0.0.1]) by mail1.quietroad.net (Postfix) with ESMTP id C95B9622B for ; Tue, 18 Oct 2005 17:02:38 -0500 (CDT) Received: from mail1.quietroad.net ([127.0.0.1]) by localhost (mail1.quietroad.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 56358-08 for ; Tue, 18 Oct 2005 17:02:32 -0500 (CDT) Received: from [192.168.0.250] (moe.cs.uic.edu [131.193.40.56]) by mail1.quietroad.net (Postfix) with ESMTP id A3E2A622E for ; Tue, 18 Oct 2005 17:02:32 -0500 (CDT) Message-ID: <435570F5.6060308@getsomewhere.net> Date: Tue, 18 Oct 2005 17:02:29 -0500 From: Joe Love User-Agent: Mozilla Thunderbird 1.0.5 (X11/20050812) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-current@freebsd.org References: <43543086.7020705@getsomewhere.net> <43552198.2070806@errno.com> In-Reply-To: <43552198.2070806@errno.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: amavisd-new at quietroad.net Subject: Re: cannot get IP when auth with wpa_supplicant + ath0 driver X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Oct 2005 22:02:40 -0000 I went through the procedure again to try and give an accurate representation of what's been asked. loaded wlan_wep.ko up'd the ath0 interface (for letting ethereal grab stuff on the interface) ath0: flags=8843 mtu 1500 inet6 fe80::20f:b5ff:fe62:28e3%ath0 prefixlen 64 scopeid 0x5 ether 00:0f:b5:62:28:e3 media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps) status: no carrier ssid "" channel 10 authmode OPEN privacy OFF txpowmax 50 protmode CTS started ethereal on ath, link layer header type IEEE 802.11 plus radiotap WLAN header started wpa_supplicant (as in original email) # ifconfig ath0 ath0: flags=8943 mtu 1500 inet6 fe80::20f:b5ff:fe62:28e3%ath0 prefixlen 64 scopeid 0x5 ether 00:0f:b5:62:28:e3 media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) status: associated ssid UIC-Wireless channel 11 bssid 00:12:00:d7:0e:00 authmode OPEN privacy ON deftxkey UNDEF wepkey 2:104-bit txpowmax 50 protmode CTS roaming MANUAL bintval 100 started dhclient ("dhclient ath0") no response received. ended packet capture. (available at http://www.getsomewhere.net/wpa.80211.dump ) # ifconfig ath0 ath0: flags=8843 mtu 1500 inet6 fe80::20f:b5ff:fe62:28e3%ath0 prefixlen 64 scopeid 0x5 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 00:0f:b5:62:28:e3 media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) status: associated ssid UIC-Wireless channel 11 bssid 00:12:00:d7:0e:00 authmode OPEN privacy ON deftxkey UNDEF wepkey 2:104-bit txpowmax 50 protmode CTS roaming MANUAL bintval 100 stopped wpa_supplicant. # ifconfig ath0 ath0: flags=8802 mtu 1500 inet6 fe80::20f:b5ff:fe62:28e3%ath0 prefixlen 64 scopeid 0x5 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 00:0f:b5:62:28:e3 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid UIC-Wireless channel 11 authmode OPEN privacy OFF txpowmax 50 protmode CTS bintval 100 I decided at this point to re-read the email you sent, and go ahead with running athstats and 80211stats, so the following is the output from athstats & 80211stats after a separate run of wpa_supplicant: # athstats && 80211stats 4 mib overflow interrupts 20 tx management frames 61 tx frames discarded prior to association 18 tx frames with no ack marked 11 tx frames with short preamble 3 rx failed 'cuz of bad CRC 4 periodic calibrations 1 rfgain value change 287 rate control checks rssi of last ack: 29 avg recv rssi: 33 4 switched default/rx antenna Antenna profile: [1] tx 28 rx 1574 [2] tx 0 rx 28 1 rx discard 'cuz mcast echo 1430 rx beacon frames 1444 rx element unknown 15 rx frame chan mismatch 1 tx failed 'cuz no defkey 2 active scans started I hope this all helps. In case the url for the packet capture got glossed over above (since it's kinda buried) it's available at: http://www.getsomewhere.net/wpa.80211.dump -Joe Sam Leffler wrote: > Joe Love wrote: > >> I'm trying to use my wireless connection on my campus's wireless >> network. >> >> I'm using FreeBSD 6.0-RC1, with the pre-packaged wpa_supplicant >> 0.3.9. I've tried using both a linksys wpc11 using the wi driver, >> and a netgear wg511t using the ath driver. I'm currently betting on >> using the netgear permanently, as the linksys card is causing me >> unending issues as of late. The campus wireless uses TTLS+PAP, and >> IPs are assigned dynamically. >> >> The problem I'm having is that after the connection is established >> (it seems to authenticate just fine), I cannot get a response to any >> dhcp requests. >> Jouni Malinen, from the hostap mailing lists, proposed the following >> as the problem: >> "This AP is using somewhat non-standard key configuration (something >> that most Cisco APs do with IEEE 802.1X), i.e., unicast key is using >> non-zero key index (2 or 3) and broadcast key is using the other >> indexes (alternating between 0 and 1). > > > This shouldn't matter. > >> "The packet dump looked like WEP decryption would not have been done >> or it would have failed completely. I would assume that the driver >> code would drop the packet if ICV is incorrect, so I would assume >> that the packet was not decrypted at all. >> "I have seen this kind of key index use having issues with number of >> drivers. In other words, this is a question for FreeBSD mailing lists >> after all. Including the description of key index use with the >> message should make it easier for the driver/IEEE 802.11 stack >> authors to take a closer look at this. Anyway, a fix for this may >> require changing the driver interface code for the set_key handler on >> wpa_supplicant side, too." >> >> Included below are the wpa_supplicant configuration I am using and >> the output of wpa_supplicant -d -iath0 -cwpa_supplicant.conf >> >> A packet dump of the transaction and some data following it (taken >> from ethereal 0.10.10) can be found at >> http://www.getsomewhere.net/wpa.dump > > > This dump is at the 802.3 level which is not useful; we need to see > what's going on at the 802.11 level or below in the driver. > >> >> Thanks, >> -Joe >> >> wpa_supplicant.conf: >> ctrl_interface=/var/run/wpa_supplicant >> eapol_version=2 >> ap_scan=1 >> #ap_scan=2 # suggested. >> network={ >> ssid="UIC-Wireless" >> scan_ssid=1 >> #key_mgmt=IEEE8021X WPA-EAP >> mode=0 >> key_mgmt=IEEE8021X >> eap=TTLS >> identity="jlove1" >> password="CENSORED" >> anonymous_identity="anonymous" >> ca_cert="thawte.pem" >> #phase1="include_tls_length=1" >> phase2="auth=PAP" >> } >> >> wpa_supplicant output: >> # wpa_supplicant -d -iath0 -cwpa_supplicant.conf >> Initializing interface 'ath0' conf 'wpa_supplicant.conf' driver >> 'default' >> Configuration file 'wpa_supplicant.conf' -> >> '/usr/home/lyfe/wpa_supplicant.conf' >> Reading configuration file '/usr/home/lyfe/wpa_supplicant.conf' >> ctrl_interface='/var/run/wpa_supplicant' >> eapol_version=2 >> ap_scan=1 >> Priority group 0 >> id=0 ssid='UIC-Wireless' >> Initializing interface (2) 'ath0' >> EAPOL: SUPP_PAE entering state DISCONNECTED >> EAPOL: KEY_RX entering state NO_KEY_RECEIVE >> EAPOL: SUPP_BE entering state INITIALIZE >> EAP: EAP entering state DISABLED >> EAPOL: External notification - portEnabled=0 >> EAPOL: External notification - portValid=0 >> Own MAC address: 00:0f:b5:62:28:e3 >> wpa_driver_bsd_set_wpa: enabled=1 >> wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1 >> wpa_driver_bsd_del_key: keyidx=0 >> wpa_driver_bsd_del_key: keyidx=1 >> wpa_driver_bsd_del_key: keyidx=2 >> wpa_driver_bsd_del_key: keyidx=3 >> wpa_driver_bsd_set_countermeasures: enabled=0 >> wpa_driver_bsd_set_drop_unencrypted: enabled=1 >> Setting scan request: 0 sec 100000 usec >> Starting AP scan (specific SSID) >> Scan SSID - hexdump_ascii(len=12): >> 55 49 43 2d 57 69 72 65 6c 65 73 73 UIC-Wireless >> Received 0 bytes of scan results (3 BSSes) >> Scan results: 3 >> Selecting BSS from priority group 0 >> 0: 00:12:00:d7:0e:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 1: 00:0c:41:75:12:a0 ssid='Linksys' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 2: 00:13:46:15:84:5a ssid='powerlab' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> No suitable AP found. >> Setting scan request: 5 sec 0 usec >> Starting AP scan (broadcast SSID) >> Received 0 bytes of scan results (4 BSSes) >> Scan results: 4 >> Selecting BSS from priority group 0 >> 0: 00:12:00:d7:0e:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 1: 00:40:05:26:d5:24 ssid='mie-g' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 2: 00:0c:41:75:12:a0 ssid='Linksys' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 3: 00:13:46:15:84:5a ssid='powerlab' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> No suitable AP found. >> Setting scan request: 5 sec 0 usec >> Starting AP scan (specific SSID) >> Scan SSID - hexdump_ascii(len=12): >> 55 49 43 2d 57 69 72 65 6c 65 73 73 UIC-Wireless >> Received 0 bytes of scan results (3 BSSes) >> Scan results: 3 >> Selecting BSS from priority group 0 >> 0: 00:12:00:d7:0e:00 ssid='UIC-Wireless' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 1: 00:0c:41:75:12:a0 ssid='Linksys' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> 2: 00:13:46:15:84:5a ssid='powerlab' wpa_ie_len=0 rsn_ie_len=0 >> skip - no WPA/RSN IE >> selected non-WPA AP 00:12:00:d7:0e:00 ssid='UIC-Wireless' >> Trying to associate with 00:12:00:d7:0e:00 (SSID='UIC-Wireless' >> freq=2462 MHz) >> Cancelling scan request >> Automatic auth_alg selection: 0x1 >> No keys have been configured - skip key clearing >> wpa_driver_bsd_set_drop_unencrypted: enabled=1 >> wpa_driver_bsd_associate: ssid 'UIC-Wireless' wpa ie len 0 pairwise 4 >> group 4 key mgmt 3 >> wpa_driver_bsd_associate: set PRIVACY 1 >> Setting authentication timeout: 5 sec 0 usec >> EAPOL: External notification - portControl=Auto >> Association event - clear replay counter >> Associated to a new BSS: BSSID=00:12:00:d7:0e:00 >> No keys have been configured - skip key clearing >> Associated with 00:12:00:d7:0e:00 >> EAPOL: External notification - portEnabled=0 >> EAPOL: External notification - portValid=0 >> EAPOL: External notification - portEnabled=1 >> EAPOL: SUPP_PAE entering state CONNECTING >> EAPOL: txStart >> EAPOL: SUPP_BE entering state IDLE >> EAP: EAP entering state INITIALIZE >> EAP: EAP entering state IDLE >> Setting authentication timeout: 10 sec 0 usec >> RX EAPOL from 00:12:00:d7:0e:00 >> Setting authentication timeout: 70 sec 0 usec >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_PAE entering state RESTART >> EAP: EAP entering state INITIALIZE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_PAE entering state AUTHENTICATING >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Request method=1 id=1 >> EAP: EAP entering state IDENTITY >> EAP: EAP-Request Identity data - hexdump_ascii(len=0): >> EAP: using anonymous identity - hexdump_ascii(len=9): >> 61 6e 6f 6e 79 6d 6f 75 73 anonymous >> EAP: EAP entering state SEND_RESPONSE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_BE entering state RESPONSE >> EAPOL: txSuppRsp >> EAPOL: SUPP_BE entering state RECEIVE >> WPA: EAPOL frame too short, len 46, expecting at least 99 >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Request method=1 id=2 >> EAP: EAP entering state IDENTITY >> EAP: EAP-Request Identity data - hexdump_ascii(len=0): >> EAP: using anonymous identity - hexdump_ascii(len=9): >> 61 6e 6f 6e 79 6d 6f 75 73 anonymous >> EAP: EAP entering state SEND_RESPONSE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_BE entering state RESPONSE >> EAPOL: txSuppRsp >> EAPOL: SUPP_BE entering state RECEIVE >> WPA: EAPOL frame too short, len 46, expecting at least 99 >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Request method=21 id=3 >> EAP: EAP entering state GET_METHOD >> EAP: initialize selected EAP method (21, TTLS) >> EAP-TTLS: Phase2 type: PAP >> TLS: Trusted root certificate(s) loaded >> EAP: EAP entering state METHOD >> EAP-TTLS: Received packet(len=6) - Flags 0x20 >> EAP-TTLS: Start >> SSL: (where=0x10 ret=0x1) >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:before/connect initialization >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 write client hello A >> SSL: (where=0x1002 ret=0xffffffff) >> SSL: SSL_connect:error in SSLv3 read server hello A >> SSL: SSL_connect - want more data >> SSL: 100 bytes pending from ssl_out >> SSL: 100 bytes left to be sent out (of total 100 bytes) >> EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL >> EAP: EAP entering state SEND_RESPONSE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_BE entering state RESPONSE >> EAPOL: txSuppRsp >> EAPOL: SUPP_BE entering state RECEIVE >> WPA: EAPOL frame too short, len 46, expecting at least 99 >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Request method=21 id=4 >> EAP: EAP entering state METHOD >> EAP-TTLS: Received packet(len=1396) - Flags 0xc0 >> EAP-TTLS: TLS Message Length: 2196 >> SSL: Need 810 bytes more input data >> SSL: Building ACK >> EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL >> EAP: EAP entering state SEND_RESPONSE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_BE entering state RESPONSE >> EAPOL: txSuppRsp >> EAPOL: SUPP_BE entering state RECEIVE >> IEEE 802.1X RX: version=1 type=0 length=1396 >> WPA: EAPOL frame (type 0) discarded, not a Key frame >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Request method=21 id=5 >> EAP: EAP entering state METHOD >> EAP-TTLS: Received packet(len=816) - Flags 0x00 >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 read server hello A >> TLS: tls_verify_cb - preverify_ok=1 err=0 (ok) depth=1 >> buf='/C=ZA/ST=Western Cape/L=Cape Town/O=Thawte Consulting >> cc/OU=Certification Services Division/CN=Thawte Server >> CA/emailAddress=server-certs@thawte.com' >> TLS: tls_verify_cb - preverify_ok=1 err=0 (ok) depth=0 >> buf='/C=US/ST=Illinois/L=Chicago/O=University of Illinois at >> Chicago/OU=Academic Computer Center/CN=odyssey1.cc.uic.edu' >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 read server certificate A >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 read server key exchange A >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 read server done A >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 write client key exchange A >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 write change cipher spec A >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 write finished A >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 flush data >> SSL: (where=0x1002 ret=0xffffffff) >> SSL: SSL_connect:error in SSLv3 read finished A >> SSL: SSL_connect - want more data >> SSL: 190 bytes pending from ssl_out >> SSL: 190 bytes left to be sent out (of total 190 bytes) >> EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL >> EAP: EAP entering state SEND_RESPONSE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_BE entering state RESPONSE >> EAPOL: txSuppRsp >> EAPOL: SUPP_BE entering state RECEIVE >> IEEE 802.1X RX: version=1 type=0 length=816 >> WPA: EAPOL frame (type 0) discarded, not a Key frame >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Request method=21 id=6 >> EAP: EAP entering state METHOD >> EAP-TTLS: Received packet(len=61) - Flags 0x80 >> EAP-TTLS: TLS Message Length: 51 >> SSL: (where=0x1001 ret=0x1) >> SSL: SSL_connect:SSLv3 read finished A >> SSL: (where=0x20 ret=0x1) >> SSL: (where=0x1002 ret=0x1) >> SSL: 0 bytes pending from ssl_out >> SSL: No data to be sent out >> EAP-TTLS: TLS done, proceed to Phase 2 >> EAP-TTLS: Derived key - hexdump(len=64): [REMOVED] >> EAP-TTLS: received 0 bytes encrypted data for Phase 2 >> EAP-TTLS: empty data in beginning of Phase 2 - use fake EAP-Request >> Identity >> EAP-TTLS: Phase 2 PAP Request >> EAP-TTLS: Encrypting Phase 2 data - hexdump(len=40): [REMOVED] >> EAP-TTLS: Authentication completed successfully >> EAP: method process -> ignore=FALSE methodState=DONE decision=COND_SUCC >> EAP: EAP entering state SEND_RESPONSE >> EAP: EAP entering state IDLE >> EAPOL: SUPP_BE entering state RESPONSE >> EAPOL: txSuppRsp >> EAPOL: SUPP_BE entering state RECEIVE >> WPA: EAPOL frame too short, len 65, expecting at least 99 >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAP-Packet frame >> EAPOL: SUPP_BE entering state REQUEST >> EAPOL: getSuppRsp >> EAP: EAP entering state RECEIVED >> EAP: Received EAP-Success >> EAP: Workaround for unexpected identifier field in EAP Success: >> reqId=7 lastId=6 (these are supposed to be same) >> EAP: EAP entering state SUCCESS >> EAPOL: SUPP_BE entering state RECEIVE >> EAPOL: SUPP_BE entering state SUCCESS >> EAPOL: SUPP_BE entering state IDLE >> WPA: EAPOL frame too short, len 46, expecting at least 99 >> RX EAPOL from 00:12:00:d7:0e:00 >> EAPOL: Received EAPOL-Key frame >> EAPOL: KEY_RX entering state KEY_RECEIVE >> EAPOL: processKey >> EAPOL: RX IEEE 802.1X ver=1 type=3 len=57 EAPOL-Key: type=1 >> key_length=13 key_index=0x1 >> EAPOL: EAPOL-Key key signature verified >> EAPOL: Decrypted(RC4) key - hexdump(len=13): [REMOVED] >> EAPOL: Setting dynamic WEP key: broadcast keyidx 1 len 13 >> wpa_driver_bsd_set_key: alg=WEP addr=ff:ff:ff:ff:ff:ff key_idx=1 >> set_tx=0 seq_len=0 key_len=13 > > > This is the only call to install a key and it sets up a rx-only key > (set_tx=0). I don't see the unicast key being setup. I need a packet > trace at the 802.11 layer to see if frames are being dropped for some > reason. Alternatively you could use the athstats and 80211stats tools > found in tools/tools/ath to check the statistics counters. It might > also be instructive to see the state of the interface at this point > (before you hit ^C); use ifconfig to get that info. > > Sam > > >> WPA: EAPOL frame too short, len 61, expecting at least 99 >> >> ^CSignal 2 received - terminating >> wpa_driver_bsd_deauthenticate >> wpa_driver_bsd_del_key: keyidx=0 >> wpa_driver_bsd_del_key: keyidx=1 >> wpa_driver_bsd_del_key: keyidx=2 >> wpa_driver_bsd_del_key: keyidx=3 >> wpa_driver_bsd_del_key: addr=00:12:00:d7:0e:00 keyidx=0 >> ioctl[SIOCS80211, op 20, len 7]: Can't assign requested address >> EAPOL: External notification - portEnabled=0 >> EAPOL: SUPP_PAE entering state DISCONNECTED >> EAPOL: KEY_RX entering state NO_KEY_RECEIVE >> EAPOL: SUPP_BE entering state INITIALIZE >> EAP: EAP entering state DISABLED >> EAPOL: External notification - portValid=0 >> wpa_driver_bsd_set_wpa: enabled=0 >> wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0 >> wpa_driver_bsd_set_drop_unencrypted: enabled=0 >> wpa_driver_bsd_set_countermeasures: enabled=0 >> No keys have been configured - skip key clearing >> wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0 >> EAP: deinitialize previously used EAP method (21, TTLS) at EAP deinit >> # >> >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to >> "freebsd-current-unsubscribe@freebsd.org" >> >> >