From owner-freebsd-stable Sun Feb 21 23:54:32 1999 Delivered-To: freebsd-stable@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id BF46D10FB4 for ; Sun, 21 Feb 1999 23:53:47 -0800 (PST) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.2/8.9.2/UCB) id JAA50892; Mon, 22 Feb 1999 09:52:23 +0200 (EET) (envelope-from ru) Date: Mon, 22 Feb 1999 09:52:23 +0200 From: Ruslan Ermilov To: Mike Meyer Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Upgrading to 3.1-STABLE... Message-ID: <19990222095223.C40215@ucb.crimea.ua> Mail-Followup-To: Mike Meyer , freebsd-stable@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.94.17i In-Reply-To: ; from Mike Meyer on Sun, Feb 21, 1999 at 02:07:22AM -0800 X-Operating-System: FreeBSD 3.1-STABLE i386 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Feb 21, 1999 at 02:07:22AM -0800, Mike Meyer wrote: > First, to insure that those responsible hear from more than just those > who had problems (after all, if you didn't have problems, you don't > ask for help, right :-), I'd like to state that my upgrade from a > pre-ELF kernel (3.0-RELEASE) to 3.1-STABLE went just fine with a "make > ugprade" and a "disklable -B da0". My > > The problems started *after* I got the new system up. :-( > > 1) I decided to remake the stuff in /dev."sh MAKEDEV all" didn't > make da0s1a and friends. This means that after booting single > user, I couldn't "mount -u /", cause that device wasn't there. To > add insult to injury, I'm using a "dangerously dedicated" drive so > da0a is what's really mounted, but that isn't what the kernel > reports. Out comes the fixit disk. cd /dev; sh MAKEDEV da0 da0s1a > > 2) The new lpt0 driver doesn't seem to work - it says "device not > configured" when I try sending text at it. From the config file: > > # Parallel port - builds, but doesn't work, so... > device ppc0 at isa? port? net irq 7 > controller ppbus0 > device lpt0 at ppbus? > controller ppc0 at isa? disable port ? tty irq 7 > > and from dmesg: > > ppc0 at 0x378 irq 7 on isa > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppb0: IEEE1284 device found /NIBBLE > Probing for PnP devices on ppbus0: > ppbus0: HP ENHANCED PCL5,PJL,POSTSCRIPT > > > 3) /stand didn't seem to get updated. How do I go about building this? > Checking the handbook, the FAQ, the src tree and the FTP site all > turn up nothing. > Already answered. Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message