Date: Thu, 30 Oct 2003 18:20:25 -0500 From: Lanny Baron <lnb@FreeBSDsystems.COM> To: Anton <Savoschik@ukrpatent.org> Cc: freebsd-hardware@freebsd.org Subject: Re: Problem with Intel Pro/1000 MTQuad Port Server(82546EB) on motherboard Intel se7505VB2 and FreeBSD 5.1 Message-ID: <1067556024.24760.377.camel@panda.freebsdsystems.com> In-Reply-To: <13724002653.20031027153103@ukrpatent.org> References: <13724002653.20031027153103@ukrpatent.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Anton, We have fixed that. We have some clients that use 20NICs in our 2U Server. The fix will be on our up coming release of FreeBSDPRO 1.0 release. Watch for it. Regards, Lanny On Mon, 2003-10-27 at 08:31, Anton Savoschik wrote: > Hello! > I use Intel Pro/1000 MTQuad Port Server(82546EB) NIC on motherboard Intel > se7505VB2(two integrated NIC's 10/100 and 10/100/1000) and FreeBSD > 5.1. With latest driver from Intel(em-1.7.16.tar.gz) FreeBSD > recognized only two interfaces(em0, em1) instead fourth (device em2 belong to integrated 10/100/1000 NIC). > > Please help! > > Start-up system log: > > -----------------cut------------------------- > > Oct 27 11:13:10 /kernel: Hyperthreading: 2 logical CPUs > Oct 27 11:13:10 /kernel: real memory = 2146893824 (2096576K bytes) > Oct 27 11:13:10 /kernel: avail memory = 2088169472 (2039228K bytes) > Oct 27 11:13:10 /kernel: Programming 24 pins in IOAPIC #0 > Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 2 -> irq 0 > Oct 27 11:13:10 /kernel: Programming 24 pins in IOAPIC #1 > Oct 27 11:13:10 /kernel: Programming 24 pins in IOAPIC #2 > Oct 27 11:13:10 /kernel: FreeBSD/SMP: Multiprocessor motherboard > Oct 27 11:13:10 /kernel: cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 > Oct 27 11:13:10 /kernel: cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 > Oct 27 11:13:10 /kernel: io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 > Oct 27 11:13:10 /kernel: io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 > Oct 27 11:13:10 /kernel: io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 > Oct 27 11:13:10 /kernel: Preloaded elf kernel "kernel" at 0xc02ef000. > Oct 27 11:13:10 /kernel: Pentium Pro MTRR support enabled > Oct 27 11:13:10 /kernel: md0: Malloc disk > Oct 27 11:13:10 /kernel: Using $PIR table, 21 entries at 0xc00fde70 > Oct 27 11:13:10 /kernel: npx0: <math processor> on motherboard > Oct 27 11:13:10 /kernel: npx0: INT 16 interface > Oct 27 11:13:10 /kernel: pcib0: <Host to PCI bridge> on motherboard > Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 16 -> irq 2 > Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 19 -> irq 5 > Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 18 -> irq 10 > Oct 27 11:13:10 /kernel: pci0: <PCI bus> on pcib0 > Oct 27 11:13:10 /kernel: agp0: <Intel Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 > Oct 27 11:13:10 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2551) at 0.1 > Oct 27 11:13:10 /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=2552)> mem 0xf8000000-0xfbffffff at device 1.0 on pci0 > Oct 27 11:13:10 /kernel: pci1: <PCI bus> on pcib1 > Oct 27 11:13:10 /kernel: pcib2: <PCI to PCI bridge (vendor=8086 device=2553)> at device 2.0 on pci0 > Oct 27 11:13:10 /kernel: pci2: <PCI bus> on pcib2 > Oct 27 11:13:10 /kernel: pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 > Oct 27 11:13:10 /kernel: pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2 > Oct 27 11:13:10 /kernel: pci3: <PCI bus> on pcib3 > Oct 27 11:13:10 /kernel: pcib4: <PCI to PCI bridge (vendor=1014 device=01a7)> at device 2.0 on pci3 > Oct 27 11:13:10 /kernel: IOAPIC #1 intpin 6 -> irq 11 > Oct 27 11:13:10 /kernel: IOAPIC #1 intpin 7 -> irq 16 > Oct 27 11:13:10 /kernel: pci4: <PCI bus> on pcib4 > Oct 27 11:13:10 /kernel: em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x7000-0x703f mem 0xf0200000-0xf021ffff irq 11 at device 6.0 on pci4 > Oct 27 11:13:10 /kernel: em0: Speed:N/A Duplex:N/A > Oct 27 11:13:10 /kernel: em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x7040-0x707f mem 0xf0220000-0xf023ffff irq 16 at device 6.1 on pci4 > Oct 27 11:13:10 /kernel: em1: Speed:N/A Duplex:N/A > Oct 27 11:13:10 /kernel: pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 > Oct 27 11:13:10 /kernel: pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2 > Oct 27 11:13:10 /kernel: pci5: <PCI bus> on pcib5 > Oct 27 11:13:10 /kernel: em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x8000-0x803f mem 0xf0300000-0xf031ffff irq 11 at device 2.0 on pci5 > Oct 27 11:13:10 /kernel: em2: Speed:N/A Duplex:N/A > Oct 27 11:13:10 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2554) at 2.1 > Oct 27 11:13:10 /kernel: pci0: <UHCI USB controller> at 29.0 irq 2 > Oct 27 11:13:10 /kernel: pci0: <UHCI USB controller> at 29.1 irq 5 > Oct 27 11:13:10 /kernel: pci0: <UHCI USB controller> at 29.2 irq 10 > Oct 27 11:13:10 /kernel: pcib6: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 > Oct 27 11:13:10 /kernel: pci6: <PCI bus> on pcib6 > Oct 27 11:13:10 /kernel: pci6: <ATI Mach64-GR graphics accelerator> at 2.0 irq 17 > Oct 27 11:13:10 /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9400-0x943f mem 0xf0420000-0xf043ffff,0xf0401000-0xf0401fff irq 10 at device 3.0 on pci6 > Oct 27 11:13:10 /kernel: fxp0: Ethernet address 00:04:23:46:aa:c5 > Oct 27 11:13:10 /kernel: inphy0: <i82555 10/100 media interface> on miibus0 > Oct 27 11:13:10 /kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > Oct 27 11:13:10 /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 > Oct 27 11:13:10 /kernel: isa0: <ISA bus> on isab0 > Oct 27 11:13:10 /kernel: atapci0: <Intel ICH4 ATA100 controller> port 0x6860-0x686f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 > Oct 27 11:13:10 /kernel: ata0: at 0x1f0 irq 14 on atapci0 > Oct 27 11:13:10 /kernel: ata1: at 0x170 irq 15 on atapci0 > Oct 27 11:13:10 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 0 > Oct 27 11:13:10 /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe2000-0xe27ff on isa0 > > -----------------cut------------------------- > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" -- =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+= Lanny Baron Proud to be 100% FreeBSD http://www.FreeBSDsystems.COM =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1067556024.24760.377.camel>