Date: Mon, 9 Dec 2013 00:15:40 +0200 From: Antonis Anastasiadis <anastasiadis@datalive.gr> To: freebsd-x11@freebsd.org Cc: ray@freebsd.org Subject: Troubleshooting Radeon KMS with a HD 5700 gpu Message-ID: <CADi8LnO3yu6mGcSx0wiZ26a%2BrYgQxsipri32RrmN%2BV6dFPKcxA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi, I'm having trouble activating KMS with an AMD Radeon 5770 card: Once the "radeonkms" module is loaded, the monitor loses the video signal. The GPU is connected to a 27" Dell monitor via DisplayPort. I'm using latest HEAD sources with WITH_NEW_XORG in make.conf and the recent svn ports checkout from here: https://wiki.freebsd.org/Graphics#Ports The same happens if I don't load the radeonkms module at boot, but put "radeon" as the display driver in xorg.conf instead. A dmesg attached. The system runs xorg 7.7, dri 9.1.7and xf86-video-ati-7.2.0. I'll gladly test further. Antonis [-- Attachment #2 --] Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-RC1 #1 r259098: Sun Dec 8 15:15:21 EET 2013 antonis@bsd:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: AMD Phenom(tm) II X4 955 Processor (3206.32-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f43 Family = 0x10 Model = 0x4 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8269701120 (7886 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <120610 APIC1743> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130823/tbfadt-630) ioapic0 <Version 2.1> irqs 0-23 on motherboard random: <Software, Yarrow> initialized kbd1 at kbdmux0 acpi0: <120610 RSDT1743> on motherboard acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9fffff irq 18 at device 0.0 on pci1 hdac0: <ATI RV840 HDA Controller> mem 0xfe9bc000-0xfe9bffff irq 19 at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib2 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeaf0000-0xfeafffff irq 19 at device 0.0 on pci2 xhci0: 32 byte context size. usbus0 on xhci0 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x28000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:25:22:99:24:fc ahci0: <ATI IXP700 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ffc00-0xfe8fffff irq 22 at device 17.0 on pci0 ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at device 18.0 on pci0 usbus1 on ohci0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fd000-0xfe8fdfff irq 16 at device 18.1 on pci0 usbus2 on ohci1 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe8ff800-0xfe8ff8ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.0 on pci0 usbus4 on ohci2 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fb000-0xfe8fbfff irq 18 at device 19.1 on pci0 usbus5 on ohci3 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe8ff400-0xfe8ff4ff irq 19 at device 19.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata1: <ATA channel> at channel 1 on atapci0 hdac1: <ATI SB600 HDA Controller> mem 0xfe8f4000-0xfe8f7fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at device 20.5 on pci0 usbus7 on ohci4 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x1fe offMax=0x3db hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 usbus7: 12Mbps Full Speed USB v1.0 ugen2.1: <ATI> at usbus2 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <0x1b73> at usbus0 uhub2: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen7.1: <ATI> at usbus7 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 ugen6.1: <ATI> at usbus6 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 ugen5.1: <ATI> at usbus5 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen4.1: <ATI> at usbus4 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen3.1: <ATI> at usbus3 uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub3: 2 ports with 2 removable, self powered uhub6: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub2: 2 ports with 2 removable, self powered ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 ada0: <ST3160815AS 3.AAD> ATA-7 SATA 1.x device ada0: Serial Number 9RA36CWR ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad6 ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 ada1: <ST3250410AS 3.AAC> ATA-7 SATA 1.x device ada1: Serial Number 6RY57MKF ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 238474MB (488395055 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad8 Netvsc initializing... SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1603161041 Hz quality 800 Root mount waiting for: usbus6 usbus3 Root mount waiting for: usbus6 usbus3 uhub7: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 usbus3 ugen3.2: <Ralink> at usbus3 ugen2.2: <Microsoft> at usbus2 ugen6.2: <Generic> at usbus6 umass0: <Generic USB Storage, class 0/0, rev 2.00/94.51, addr 2> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:7:0:-1: Attached to scbus7 Trying to mount root from zfs:tank/ROOT/default []... da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <Generic STORAGE DEVICE 9451> Removable Direct Access SCSI-0 device da0: Serial Number 000000009451 da0: 40.000MB/s transfers da0: 121MB (248320 512 byte sectors: 64H 32S/T 121C) da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> ugen2.3: <Microsoft> at usbus2 ukbd0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 3> on usbus2 kbd2 at ukbd0 run0: <1.0> on usbus3 ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0, rev 1.10/3.00, addr 2> on usbus2 ums0: 3 buttons and [XYZ] coordinates ID=0 uhid0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 3> on usbus2 run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 00:0d:a3:15:61:1f wlan0: Ethernet address: 00:0d:a3:15:61:1f run0: firmware RT2870 ver. 0.236 loaded wlan0: link state changed to UP ugen2.2: <Microsoft> at usbus2 (disconnected) ums0: at uhub0, port 2, addr 2 (disconnected) ugen2.2: <Microsoft> at usbus2 ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0, rev 1.10/3.00, addr 2> on usbus2 ums0: 3 buttons and [XYZ] coordinates ID=0 ugen6.2: <Generic> at usbus6 (disconnected) umass0: at uhub4, port 6, addr 2 (disconnected) da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <Generic STORAGE DEVICE 9451> s/n 000000009451 detached (da0:umass-sim0:0:0:0): Periph destroyed run0: firmware RT2870 ver. 0.236 loaded wlan0: link state changed to UP Limiting closed port RST response from 211 to 200 packets/sec
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADi8LnO3yu6mGcSx0wiZ26a%2BrYgQxsipri32RrmN%2BV6dFPKcxA>