Date: Tue, 15 Sep 1998 21:51:19 -0700 From: Scott Michel <scottm@cs.ucla.edu> To: freebsd-current@FreeBSD.ORG Subject: syslogd exiting/not booting Message-ID: <199809160451.VAA00343@mordred.cs.ucla.edu>
next in thread | raw e-mail | index | archive | help
This is on a CAM kernel, cvsup'd circa 6pm PDT. On bootstrap, syslogd
just freezes and forced a hard reset. I've turned it off in my rc.conf
for the time being. When I'm fully booted, I tried 'syslogd' at the
root prompt, but it keeps telling me:
syslogd: child pid NNN exited with status 1
Of course, I'll RTSL but hopefully someone has a faster clue?
-scooter
** The other problem is why CAM can't attach the CD-ROM, but that's not
stopping me from booting up...
-------------------------------------------------------------------------
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #5: Tue Sep 15 21:11:17 PDT 1998
scottm@mordred.cs.ucla.edu:/usr/src/sys/compile/MORDRED
Timecounter "i8254" frequency 1193243 Hz cost 4331 ns
Timecounter "TSC" frequency 233875498 Hz cost 111 ns
CPU: AMD-K6tm w/ multimedia extensions (233.88-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62185472 (60728K bytes)
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x01 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=1106 device=8597)> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
vga0: <Matrox MGA 1024SG graphics accelerator> rev 0x03 int a irq 9 on pci0.8.0
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 11 on pci0.10.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <8 virtual consoles, flags=0x0>
ed0 at 0x240-0x25f irq 10 maddr 0xcc000 msize 16384 on isa
ed0: address 00:00:c0:86:e3:b7, type SMC8216/SMC8216C (16 bit)
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x80 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 flags 0x80 on isa
sio1: type 16550A
pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
changing root device to da0s2a
da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING 4.5 NSE 880R> Fixed Direct Access SCSI2 device
da0: 20.0MB/s transfers (20.0MHz, offset 16), Tagged Queueing Enabled
da0: 4345MB (8899737 512 byte sectors: 255H 63S/T 553C)
da1 at ncr0 bus 0 target 6 lun 0
da1: <IOMEGA ZIP 100 J.02> Removable Direct Access SCSI2 device
da1: 3.300MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
cd0: fatal error: NOT READY, Logical unit not ready, manual intervention required -- failed to attach to device
(cd0:ncr0:0:4:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ncr0:0:4:0): NOT READY asc:4,3
(cd0:ncr0:0:4:0): Logical unit not ready, manual intervention required
-------------------------------------------------------------------------
machine "i386"
ident MORDRED
maxusers 10
cpu "I586_CPU" # aka Pentium(tm)
options "NO_F00F_HACK" # 'cos we're AMD!
options FAILSAFE
options PQ_HUGECACHE
options "COMPAT_43"
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "MD5"
options DDB
options DDB_UNATTENDED
options KTRACE #kernel tracing
#options DIAGNOSTIC
options PERFMON
options UCONSOLE
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options BOUNCE_BUFFERS
options COMPAT_LINUX
options "EXT2FS"
options CLK_CALIBRATION_LOOP
options "CLK_USE_I8254_CALIBRATION"
options CLK_USE_TSC_CALIBRATION
options PANIC_REBOOT_WAIT_TIME=10
options SCSI_CAM
#options "SCSI_2_DEF"
#options SCSI_DELAY=8
#options SCSI_NCR_DFLT_TAGS=8
options SHOW_BUSYBUFS
config kernel root on da0
options INET #Internet communications protocols
pseudo-device ether #Generic Ethernet
pseudo-device loop #Network loopback device
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device disc #Discard device
options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs
#options MROUTING # Multicast routing
options FFS #Fast filesystem
options NFS #Network File System
options FFS_ROOT #FFS usable as root device
# The rest are optional:
# options NFS_NOSERVER #Disable the NFS-server code.
options "CD9660" #ISO 9660 filesystem
options MFS #Memory File System
options MSDOSFS #MS DOS File System
options PROCFS #Process filesystem
options SOFTUPDATES
options NSWAPDEV=2
options QUOTA #enable disk quotas
controller scbus0
#device sd0
#device cd0
device da0 # CAM SCSI "direct access"
device cd0
device pass0
device pt0 at scbus? # SCSI processor type
device sctarg0 at scbus? # SCSI target
options SCSI_REPORT_GEOMETRY
options "P1003_1B"
options "_KPOSIX_PRIORITY_SCHEDULING"
options "_KPOSIX_VERSION=199309L"
pseudo-device pty 16 #Pseudo ttys - can go as high as 256
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
pseudo-device gzip #Exec gzipped a.out's
# Size of the kernel message buffer. Should be N * pagesize.
options "MSGBUF_SIZE=40960"
controller isa0
controller pnp0
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
options MAXCONS=8 # number of virtual consoles
options "STD8X16FONT" # Compile font in
makeoptions "STD8X16FONT"="cp850"
options SC_HISTORY_SIZE=200 # number of history buffer lines
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#device apm0 at isa? disable flags 0x31
controller ppbus0
device nlpt0 at ppbus?
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 flags 0x80 vector siointr
device sio1 at isa? port "IO_COM2" tty flags 0x10 irq 3 flags 0x80 vector siointr
device ed0 at isa? port 0x240 net irq 10 iomem 0xcc000 vector edintr
#controller snd0
#device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
#device sbxvi0 at isa? port 0x300 drq 5
#device sbmidi0 at isa? port 0x388
# Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!).
# You may also wish to enable the pnp controller with this, for pnp
# sound cards.
device pcm0 at isa? port 0x220 tty irq 5 drq 1 flags 0x15 vector pcmintr
controller pci0
controller ncr0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809160451.VAA00343>