Date: Thu, 27 Sep 2001 17:07:09 +0100 From: ian j hart <ianjhart@ntlworld.com> To: Stoian Mishinev <mishinev@digsys.bg> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: UDMA ICRC READ ERROR Message-ID: <3BB34EAD.565FEB7C@ntlworld.com> References: <3BB102B3.5965C0B4@digsys.bg> <3BB218E2.27E6B2C5@ntlworld.com> <3BB2B986.4961512E@digsys.bg>
next in thread | previous in thread | raw e-mail | index | archive | help
Stoian Mishinev wrote: > > Hi, > > About history: This is second hand PC previously worked with windows, > but the hard disk is new according to seller :-). > > about dmesg: > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 4.2-RELEASE #0: Thu Jun 7 19:49:54 EEST 2001 > root@gate.bularmex-ik.bg:/usr/src/sys/compile/BularmexIPX > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 136818836 Hz > CPU: Pentium/P54C (136.82-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x52c Stepping = 12 > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> > real memory = 33554432 (32768K bytes) > avail memory = 28545024 (27876K bytes) > Preloaded elf kernel "kernel" at 0xc0439000. > Intel Pentium detected, installing workaround for F00F bug > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq > 11 at device 7.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at > device 7.3 on pci0 > pci0: <ATI model 4c47 graphics accelerator> at 17.0 irq 10 > rl0: <RealTek 8139 10/100BaseTX> port 0x6c00-0x6cff mem > 0xe1001000-0xe10010ff irq 12 at device 18.0 on pci0 > rl0: Ethernet address: 00:c0:26:10:4e:9a > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > an0: <Aironet PCI4800> port 0x7400-0x743f,0x7000-0x707f mem > 0xe1002000-0xe100207f irq 5 at device 19.0 on pci0 > an0: Ethernet address: 00:40:96:34:c9:40 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/16 bytes threshold > ppi0: <Parallel I/O> on ppbus0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > DUMMYNET initialized (000608) > IP packet filtering initialized, divert enabled, rule-based forwarding > enabled, default to accept, unlimited logging > ad0: 4112MB <ST34313A> [8912/15/63] at ata0-master UDMA33 > Mounting root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > ad0: UDMA ICRC READ ERROR blk# 139295 retrying > ad0: UDMA ICRC READ ERROR blk# 519775 retrying > ad0: UDMA ICRC READ ERROR blk# 519775 retrying > rl0: promiscuous mode enabled > rl0: promiscuous mode disabled > ad0: UDMA ICRC READ ERROR blk# 3473959 retrying > ad0: UDMA ICRC READ ERROR blk# 8321559 retrying > ad0: UDMA ICRC READ ERROR blk# 8321559 retrying > > And this is a part of /var/log/messages: > > Sep 27 02:03:51 gate /kernel: ad0: 4112MB <ST34313A> [8912/15/63] at > ata0-master UDMA33 > Sep 27 02:03:51 gate /kernel: Mounting root from ufs:/dev/ad0s1a > Sep 27 02:03:51 gate /kernel: WARNING: / was not properly dismounted > Sep 27 02:03:51 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 139295 > retrying > Sep 27 02:03:51 gate named[125]: starting. named 8.2.3-T6B Mon Nov 20 > 11:27:49 GMT 2000 > Sep 27 02:03:51 gate named[125]: limit files set to fdlimit (1024) > Sep 27 02:03:51 gate named[126]: Ready to answer queries. > Sep 27 02:03:55 gate ntpd[129]: ntpd 4.0.99b Mon Nov 20 11:27:20 GMT > 2000 (1) > Sep 27 02:03:55 gate ntpd[129]: using kernel phase-lock loop 2040 > Sep 27 02:04:02 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 519775 > retrying > Sep 27 02:04:02 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 519775 > retrying > Sep 27 02:04:04 gate /kernel: rl0: promiscuous mode enabled > Sep 27 02:04:04 gate arpwatch: fopen(arp.dat): No such file or directory > Sep 27 02:04:04 gate /kernel: rl0: promiscuous mode disabled > Sep 27 02:04:05 gate squid[232]: Starting Squid Cache version > 2.3.STABLE4 for i386--freebsd4.2... > Sep 27 02:04:05 gate squid[232]: Process ID 232 > Sep 27 02:04:05 gate squid[232]: With 1064 file descriptors available > > ............... > ............... > > Sep 27 02:11:47 gate ntpd[129]: kernel pll status change 2041 > Sep 27 02:58:54 gate ntpd[129]: time reset -0.244426 s > Sep 27 07:58:59 gate ntpd[129]: time reset -0.149632 s > Sep 27 08:11:54 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 8321559 > retrying > Sep 27 08:11:55 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 8321559 > retrying > Sep 27 08:25:37 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 3470055 > retrying > Sep 27 08:25:38 gate last message repeated 2 times > Sep 27 08:25:38 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 3470055 > falling back to PIO mode > > ian j hart wrote: > > > > Stoian Mishinev wrote: > > > > > > Hi, > > > > > > Can someone tell me wat this mean: > > > > > > Sep 26 01:11:51 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 135751 > > > retrying > > > Sep 26 01:11:52 gate last message repeated 2 times > > > Sep 26 01:11:52 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 135751 > > > falling back to PIO mode > > > > > > Thanks! > > > > > > Stoain Mishinev > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-stable" in the body of the message > > > > Post the output from dmesg. > > > > Some history might also be useful. eg recent O/S or hardware > > upgrade. > > > > Did you read any of the threads on this subject? (stable and hardware) > > > > -- > > ian j hart Open the case and see if you can identify the motherboard. This is not always easy, you may end up searching the net for obscure numbers. If you can id the M/B look for a BIOS update. While you have the case open measure the IDE cable, M/B to drive, and check for obvious faults/kinks/whatever. Is the drive really hot? Consider upgrading to 4.4-RELEASE. A _new_ 4Gb drive sounds a tad suspect ;) Do the faults go away once the drive is in pio mode? -- ian j hart To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BB34EAD.565FEB7C>