From owner-freebsd-virtualization@FreeBSD.ORG Mon May 26 12:13:49 2008 Return-Path: Delivered-To: freebsd-virtualization@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 37AAC106567E; Mon, 26 May 2008 12:13:49 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 2B1428FC18; Mon, 26 May 2008 12:13:48 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <483AA979.5060504@FreeBSD.org> Date: Mon, 26 May 2008 14:13:45 +0200 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.14 (Macintosh/20080421) MIME-Version: 1.0 To: Marko Zec References: <483834AD.9050208@FreeBSD.org> <48388496.8090707@FreeBSD.org> <200805261304.20497.zec@icir.org> In-Reply-To: <200805261304.20497.zec@icir.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: "Bjoern A. Zeeb" , Julian Elischer , freebsd-virtualization@freebsd.org Subject: Re: vimage kernel broken X-BeenThere: freebsd-virtualization@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussion of various virtualization techniques FreeBSD supports." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 26 May 2008 12:13:49 -0000 Marko Zec wrote: > On Saturday 24 May 2008 23:11:50 Kris Kennaway wrote: >> Julian Elischer wrote: >>> On May 24, 2008, at 8:30 AM, Kris Kennaway wrote: >>>> I tried to boot a kernel taken from the vimage p4 branch, but it >>>> panics when starting lockd during multiuser boot: >>> this is believable. >>> Particularly as I see you are using IPv6 and I don't have IPv6 test >>> facilities. >>> >>> nlm? hmm what were you doing? >> As mentioned, just booting the system with rpc.lockd enabled in >> rc.conf. A kernel with IPv6 compiled in is all that's needed. > > Hi, > > I can't reproduce this with the latest p4 / vimage sources: > > tca51% uname -a > FreeBSD tca51.tel.fer.hr 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Mon May 26 > 11:32:09 CEST 2008 > marko@tca51.tel.fer.hr:/u/marko/p4/vimage/src/sys/i386/compile/VIMAGE > i386 > > tca51% ifconfig > bge0: flags=8843 metric 0 mtu > 1500 > options=9b > ether 00:11:25:3b:89:76 > inet6 fe80::211:25ff:fe3b:8976%bge0 prefixlen 64 scopeid 0x2 > inet 192.168.200.51 netmask 0xffffff00 broadcast 192.168.200.255 > inet6 a:2::51 prefixlen 64 > media: Ethernet autoselect (100baseTX ) > status: active > lo0: flags=8049 metric 0 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > > tca51% cat /etc/rc.conf > keyrate="fast" > moused_enable="YES" > ifconfig_bge0="inet 192.168.200.51/24" > hostname="tca51.tel.fer.hr" > sshd_enable="YES" > sendmail_enable="NONE" > syslogd_flags="-ss" > > ipv6_enable="YES" > ipv6_network_interfaces="auto" > ipv6_defaultrouter="NO" > ipv6_ifconfig_bge0="a:2::51 prefixlen 64" > > rpcbind_enable="YES" > nfs_client_enable="YES" > nfs_server_enable="YES" > rpc_statd_enable="YES" > rpc_lockd_enable="YES" > > tca51% cat /etc/exports > /usr -ro > > tca51% showmount > Hosts on localhost: > a:2::101 > > tca51% ps -ax|fgrep rpc > 581 ?? Is 0:00.03 /usr/sbin/rpcbind > 639 ?? Ss 0:01.57 /usr/sbin/rpc.statd > 645 ?? Ss 0:00.01 rpc.lockd: server (rpc.lockd) > 850 p0 R+ 0:00.00 fgrep rpc > > > What is it that I'm missing to trigger this panic? > > BTW capturing the output of "show pcpu" and "show vnets" from the KDB > prompt would be useful. In general, curvnet must point to a regular > vnet structure while executing any networking code, otherwise it must > be set to NULL. > > Thanks, > > Marko > > >> Kris >> >>>> Kris >>>> >>>> ---- >>>> Starting lockd. >>>> >>>> >>>> Fatal trap 12: page fault while in kernel mode >>>> cpuid = 0; apic id = 00 >>>> fault virtual address = 0x0 >>>> fault code = supervisor read, page not present >>>> instruction pointer = 0x20:0xc08afb8e >>>> stack pointer = 0x28:0xc6f3f8a8 >>>> frame pointer = 0x28:0xc6f3f8fc >>>> code segment = base 0x0, limit 0xfffff, type 0x1b >>>> = DPL 0, pres 1, def32 1, gran 1 >>>> processor eflags = interrupt enabled, resume, IOPL = 0 >>>> current process = 764 (rpc.lockd) >>>> [thread pid 764 tid 100047 ] >>>> Stopped at sa6_recoverscope+0x7e: movl 0(%eax),%edi >>>> db> wh >>>> Tracing pid 764 tid 100047 td 0xc71cbcc0 >>>> sa6_recoverscope(c71e0c00,1c,2,0,c82c0c4c,...) at >>>> sa6_recoverscope+0x7e in6_sockaddr(0,c6f3f930,1f8,0,0,...) at >>>> in6_sockaddr+0x6d >>>> in6_getsockaddr(c833c318,c6f3f98c,c833c318,c6f3f9e8,c6f3f9a0,...) >>>> at in6_getsockaddr+0x89 >>>> in6_mapped_sockaddr(c833c318,c6f3f98c,c71cbd64,c0afde50,c6f3f9a0,. >>>> ..) at in6_mapped_sockaddr+0x5c >>>> __rpc_socket2sockinfo(c833c318,c6f3f9e8,c0c09db4,4,c0ad9548,...) >>>> at __rpc_socket2sockinfo+0x28 >>>> clnt_dg_create(c833c318,c6f3faa4,186a0,4,0,...) at >>>> clnt_dg_create+0x3f nlm_get_rpc(c6f3fc04,1c,2,0,c7080800,...) at >>>> nlm_get_rpc+0xb8 >>>> nlm_syscall(c71cbcc0,c6f3fcfc,10,c71cbcc0,c0b93370,...) at >>>> nlm_syscall+0x227 >>>> syscall(c6f3fd38) at syscall+0x2a3 >>>> Xint0x80_syscall() at Xint0x80_syscall+0x20 >>>> --- syscall (154, FreeBSD ELF32, nlm_syscall), eip = 0x280e315b, >>>> esp = 0xbfbfedbc, ebp = 0xbfbfee88 --- > > > Maybe I am using the wrong branch, can you confirm which is current? Kris