Date: Tue, 21 Feb 2006 04:53:59 +0000 From: "Ben Kaduk" <minimarmot@gmail.com> To: freebsd-questions@freebsd.org Subject: 6.0-release remote x application failure to open display Message-ID: <47d0403c0602202053w751133eeta6c5210e0ab62cd2@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
------=_Part_10118_10175645.1140497639076
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Hi all,
I think this is probably a simple question, but I do not recall having
any difficulties on 5.2.1 or 5.3-beta3, which are the other versions
that I had run on this box.
I recently have performed a clean install of 6.0-release on this
machine, on a new hard drive, and then copied over the data and some
configuration files (ssh keys, etc.) from the old hard drive (it is a
slow machine, so I didn't want to build current). Having done so, I
then tried to login remotely to this machine and run xmms (it is
mostly used as my "music server"), which failed with this error:
** CRITICAL **: Unable to open display
I have tried with passing the -X flag, and with passing the -Y flag to
ssh, but there is no change in behaviour.
Is there something that I have forgotten to enable, or is this unexpected?
Some information about the computer:
kaduk@pleonasm$ uname -a
FreeBSD pleonasm.mooo.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Mon Feb
20 01:22:19 UTC 2006 =20
root@pleonasm.urh.uiuc.edu:/usr/obj/usr/src/sys/PLEONASM i386
dmesg is attached (if it makes it through the list).
Thanks,
Ben Kaduk
------=_Part_10118_10175645.1140497639076
Content-Type: application/octet-stream; name=dmesg.boot
Content-Transfer-Encoding: 7bit
X-Attachment-Id: f_ejxommo0
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Mon Feb 20 01:22:19 UTC 2006
root@pleonasm.urh.uiuc.edu:/usr/obj/usr/src/sys/PLEONASM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 469762048 (448 MB)
avail memory = 454508544 (433 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <simple comms> at device 13.0 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0x1400-0x14ff mem 0xe8400000-0xe84003ff irq 9 at device 14.0 on pci0
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:50:bf:9f:0a:98
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0x1800-0x18ff mem 0xe8400400-0xe84004ff irq 5 at device 15.0 on pci0
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:ba:b6:79:b3
pcm0: <Creative Audigy 2 (EMU10K2)> port 0x1040-0x107f irq 11 at device 16.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
fwohci0: <1394 Open Host Controller Interface> mem 0xe8400800-0xe8400fff,0xe8404000-0xe8407fff irq 10 at device 16.2 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:51:05:07:32
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xe0000-0xe3fff,0xe4000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sio0: configured irq 4 not in bitmap of probed irqs 0x8
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
ppc1: parallel port not found.
Timecounter "TSC" frequency 299942353 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, logging disabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 5 packets/entry by default
acd0: CDROM <LTN301/MM07> at ata0-master PIO4
acd1: CDRW <LG CD-RW CED-8120B/1.03> at ata0-slave PIO4
ad2: 8063MB <IBM DHEA-38451 HP8OA20C> at ata1-master UDMA33
ad3: 114473MB <Seagate ST3120026A 8.01> at ata1-slave UDMA33
Trying to mount root from ufs:/dev/ad3s1a
Loading configuration files.
kernel dumps on /dev/ad3s1b
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad3s1b as swap device
Starting file system checks:
/dev/ad3s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad3s1a: clean, 216460 free (1684 frags, 26847 blocks, 0.7% fragmentation)
/dev/ad3s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad3s1e: clean, 253809 free (41 frags, 31721 blocks, 0.0% fragmentation)
/dev/ad3s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad3s1f: clean, 25723046 free (52918 frags, 3208766 blocks, 0.1% fragmentation)
/dev/ad3s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad3s1d: clean, 715616 free (744 frags, 89359 blocks, 0.1% fragmentation)
Setting hostname: pleonasm.mooo.com.
rl0: no link ...
.
got link
DHCPREQUEST on rl0 to 255.255.255.255 port 67
DHCPACK from 130.126.68.1
bound to 130.126.70.226 -- renewal in 302400 seconds.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::250:bfff:fe9f:a98%dc0 prefixlen 64 scopeid 0x1
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet 192.169.0.2 netmask 0xffffff00 broadcast 192.169.0.255
ether 00:50:bf:9f:0a:98
media: Ethernet autoselect (none)
status: no carrier
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::250:baff:feb6:79b3%rl0 prefixlen 64 scopeid 0x2
inet 130.126.70.226 netmask 0xfffffc00 broadcast 130.126.71.255
ether 00:50:ba:b6:79:b3
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Starting divert daemons:
natd
Flushed all rules.
00050 divert 8668 ip from any to any via rl0
Feb 20 14:07:53 natd[255]: Aliasing to 130.126.70.226, mtu 1500 bytes
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
65000 allow ip from any to any
Firewall rules loaded
.
Firewall logging enabled
net.inet.ip.fw.enable:
1
->
1
Additional routing options:
IP gateway=YES
.
Starting devd.
Mounting NFS file systems:
.
Creating and/or trimming log files:
.
Starting syslogd.
Feb 20 14:07:54 syslogd: cannot create /sandbox/namedb/dev/log: No such file or directory
Checking for core dump on /dev/ad3s1b...
savecore: no dumps found
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
------=_Part_10118_10175645.1140497639076--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47d0403c0602202053w751133eeta6c5210e0ab62cd2>