Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Dec 2004 23:40:49 -0600
From:      Vulpes Velox <v.velox@vvelox.net>
To:        Derrick Ryalls <ryallsd@gmail.com>
Cc:        Alexandre Biancalana <biancalana@gmail.com>
Subject:   Re: AMD Athlon XP 3200+ and reboots under load...
Message-ID:  <20041213234049.1224461a@vixen42.24-119-122-191.cpe.cableone.net>
In-Reply-To: <d5eb95fc041213174364345343@mail.gmail.com>
References:  <20041211033635.76518.qmail@web50709.mail.yahoo.com> <20041211232817.009aef2a@vixen42.24-119-122-191.cpe.cableone.net> <8e10486b0412131714140d69aa@mail.gmail.com> <61913.65.110.244.9.1102987165.squirrel@mail.pyrospheric.net> <8e10486b04121317247e6a200a@mail.gmail.com> <d5eb95fc041213174364345343@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 13 Dec 2004 17:43:18 -0800
Derrick Ryalls <ryallsd@gmail.com> wrote:

> > On Mon, 13 Dec 2004 19:19:25 -0600 (CST), draconius
> > <draconius@pyrospheric.net> wrote:
> > > what are your temperatures inside the case? what kind of cooling
> > > / airflow do you have in the case? I have had heat problems
> > > before due to bad airflow in the case where all the hot air
> > > concentraded around the processor(s)
> > >
> > > -drac
> > 
> > 
> > >
> > >
> > > > I tested with FreeBSD 4.10 and 5.3. The same problem ocurs,
> > > > when the the machine not reboot, varios coredumps in as/gcc
> > > > hapens during make buildworld.
> > > >
> > > > Hardware:
> > > >
> > > > Asus A7V600-X
> > > > AMD Sempron 2400+
> > > > 512MB DDR 400
> > > >
> > > > any ideas ??
> > > >
> 
> I think I am running AV7600 (no X), and when I was thinking about
> upgrading the ram, I saw a note saying to check Asus' website to
> make sure they have tested the ram first.  With lower speed ram, you
> can probably run anything, but for the highest speed stuff, you
> should check to make sure they work well with it.

This is only true if is a ram problem or the like, if it is a mother
board problem this does not make much of a difference from my
experience.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041213234049.1224461a>