From owner-freebsd-stable Mon Nov 25 2:59:23 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0FD4937B401 for ; Mon, 25 Nov 2002 02:59:18 -0800 (PST) Received: from luthien.ukc.ac.uk (luthien.ukc.ac.uk [129.12.41.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7BD7D43E6E for ; Mon, 25 Nov 2002 02:59:17 -0800 (PST) (envelope-from pao@luthien.ukc.ac.uk) Received: from pao by luthien.ukc.ac.uk with local (Exim 4.10) id 18GGxO-00004t-00 for freebsd-stable@freebsd.org; Mon, 25 Nov 2002 10:59:14 +0000 Date: Mon, 25 Nov 2002 10:59:14 +0000 From: Paul To: freebsd-stable@freebsd.org Subject: ThinkPad R31 - Lucent windmodem woes.... Message-ID: <20021125105914.B240@luthien.ukc.ac.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have an R31 Thinkpad that has a Lucent Winmodem, and am having trouble getting the thing to work under FreeBSD. I have installed the comms/ltmdm port, this fails to work (the kernel module is loaded) but pciconf doesn't report the hardware device. A rummage round the net, revealed that I should turn off PNP in the BIOS - thats not an option on the R31. So I tried the following in my kernel config: options PCI_ENABLE_IO_MODES as suggested by the driver developer (I forget the name), at the moment the only error I get when I start ppp is: luthien# ppp Working in interactive mode Using interface: tun0 ppp ON luthien> dial isp Warning: deflink: /dev/cual0: Bad file descriptor ppp ON luthien> However the file is there: luthien# ls -la /dev/cual0 crw-rw---- 1 uucp dialer 228, 128 Nov 25 10:29 /dev/cual0 kldstat reveals: luthien# kldstat Id Refs Address Size Name 1 6 0xc0100000 20bff4 kernel 3 1 0xc121a000 a000 ntfs.ko 4 1 0xc12bf000 1b000 usb.ko 5 1 0xc12f8000 3000 daemon_saver.ko 6 1 0xc12fb000 14000 linux.ko 7 1 0xc1342000 7d000 ltmdm.ko Copies of pciconf -lv and dmesg follows, if anyone has any suggestions other than using an external/pcmcia modem I would be very gratefull. Thanks for your time. Paul ------------- pciconf -lv ============ chip0@pci0:0:0: class=0x060000 card=0x10171014 chip=0x35758086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82830[MP] Host-Hub I/F Bridge / SDRAM Controller' class = bridge subclass = HOST-PCI agp0@pci0:2:0: class=0x030000 card=0x05051014 chip=0x35778086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82830M/MG Integrated Graphics Device' class = display subclass = VGA none0@pci0:2:1: class=0x038000 card=0x05051014 chip=0x35778086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82830M/MG Integrated Graphics Device' class = display uhci0@pci0:29:0: class=0x0c0300 card=0x10171014 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x10171014 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x10171014 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #3' class = serial bus subclass = USB pcib1@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM Hub Interface to PCI Bridge (Camino 2)' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM LPC Interface or ISA bridge: see Notes' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x10171014 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA none1@pci0:31:3: class=0x0c0500 card=0x10171014 chip=0x24838086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller' class = serial bus subclass = SMBus pcm0@pci0:31:5: class=0x040100 card=0x05001014 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none2@pci0:31:6: class=0x070300 card=0x05031014 chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms fxp0@pci1:8:0: class=0x020000 card=0x10311014 chip=0x10318086 rev=0x42 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection' class = network subclass = ethernet pcic0@pci1:9:0: class=0x060700 card=0x10171014 chip=0xac50104c rev=0x02 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1410 PC card cardBus Controller' class = bridge subclass = PCI-CardBus ====================== dmesg: ======== Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #1: Mon Nov 25 10:23:48 GMT 2002 pao@luthien.ukc.ac.uk:/usr/src/sys/compile/LUTHIEN Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1133.21-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff real memory = 259850240 (253760K bytes) avail memory = 249737216 (243884K bytes) Preloaded elf kernel "kernel" at 0xc0311000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031109c. Preloaded elf module "splash_bmp.ko" at 0xc03110ec. Pentium Pro MTRR support enabled module_register_init: MOD_LOAD (splash_bmp, c030c774, 0) error 2 pcibios: No call entry point apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 agp0: mem 0x90100000-0x9017ffff,0x98000000-0x9fffffff irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: (vendor=0x8086, dev=0x3577) at 2.1 pci0: at 29.0 irq 11 pci0: at 29.1 irq 11 pci0: at 29.2 irq 11 pcib1: at device 30.0 on pci0 pci1: on pcib1 fxp0: port 0x7000-0x703f mem 0x80100000-0x80100fff irq 11 at device 8.0 on pci1 fxp0: Ethernet address 00:00:e2:82:2d:59 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcic0: irq 11 at device 9.0 on pci1 pcic0: PCI Memory allocated: 0x88000000 pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] pccard0: on pcic0 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xa890-0xa89f,0xa878-0xa87b,0xa860-0xa867,0xa848-0xa84b,0xa830-0xa837 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: (vendor=0x8086, dev=0x2483) at 31.3 irq 11 pcm0: port 0x9c00-0x9c3f,0x9800-0x98ff irq 11 at device 31.5 on pci0 pci0: (vendor=0x8086, dev=0x2486) at 31.6 irq 11 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ad0: 19077MB [41344/15/63] at ata0-master UDMA100 acd0: CDROM at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a pccard: card inserted, slot 0 pcic0: Card type 32-bit cardbus is unsupported uhci0: port 0xa4a0-0xa4bf irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pccard: card removed, slot 0 uhci1: port 0xa4e0-0xa4ff irq 11 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xa800-0xa81f irq 11 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message